S. Alirezaei, S. M. Monirvaghefi, M. Salehi, and A. Saatchi, Wear behavior of Ni-P and Ni-P-Al 2 O 3 electroless coatings, Wear, vol.262, pp.978-985, 2007.

S. Alirezaei, S. M. Monirvaghefi, M. Salehi, and A. Saatchi, Effect of alumina content on surface morphology and hardness of Ni-PAl 2 O 3 (a) electroless composite coatings, Surf Coat Technol, vol.184, pp.170-175, 2004.

H. C. Barshilia, S. Prakash, M. Poojari, A. Rajam, and K. S. , Corrosion behavior of nanolayed TiN y NbN multilayer coatings prepared by reactiveer direct current magnetron sputtering process, Thin Solid Film, vol.460, pp.133-142, 2004.

H. C. Barshilia and K. S. Rajam, Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering, Appl Surf Sci, vol.255, pp.2925-2931, 2008.

E. Celik, C. Tekmen, I. Ozdemir, H. Cetinel, Y. Karakas et al., Effects on performance of Cr 2 O 3 layers produced on Mo/cast-iron materials, Surf Coat Technol, vol.175, pp.1074-1081, 2003.

C. Chang and S. K. Yen, Characterization of electrolytic ZrO 2 /Al 2 O 3 double layer coatings on AISI 440C stainless steel, Surf Coat Technol, vol.182, issue.03, pp.862-866, 2004.

Y. Gaillard, V. J. Rico, E. Jimenez-pique, and A. Gonzalez-elipe, Nanoindentation of TiO 2 thin films with different microstructures, J Phys D Appl Phys, vol.42, pp.145305-145314, 2009.

U. Helmersson, S. Todorova, and S. A. Barnett, Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness, J Appl Phys, vol.481, pp.1-5, 1987.

H. Wei-yu, D. Huang, L. Huang, C. Hsu, and D. Wang, Study of characteristics of Cr 2 O 3 /CrN duplex coatings for aluminum die casting applications, Surf Coat Technol, vol.178, pp.172-177, 2004.

P. Hones, M. Diserens, and F. Lévy, Characterization of sputter-deposited chromium oxide thin films, Surf Coat Technol, vol.121, pp.384-393, 1999.

S. Huang, S. Chen, and Y. Kuo, Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings, Surf Coat Technol, vol.206, pp.1744-1752, 2011.

H. Ichimura and A. Rodrigob, The correlation of scratch adhesion with composite hardness for TiN coatings, Surf Coat Technol, vol.126, issue.00, pp.541-548, 2000.

H. Kim, Y. Koh, and H. Kim, Densification and mechanical properties of B 4 C with Al 2 O 3 as a sintering aid, J Am Ceram Soc, vol.65, pp.2863-2865, 2000.

M. Kong, X. Wu, B. Huang, and G. Li, Epitaxial growth and superhardness effect of TiN/AlON nanomultilayers synthesized by reactive magnetron sputtering technology, J Alloy Compd, vol.485, pp.435-438, 2009.

W. Li, P. Liu, and J. Wang, Microstructure and mechanical properties of TiAlN/SiO 2 nanomultilayers synthesized by reactive magnetron sputtering, Mater Lett, vol.65, pp.636-638, 2011.

C. Lin, Y. Tsai, and J. Duh, Effect of grain size on mechanical properties in CrAlN/SiNx multilayer coatings, Thin Solid Films, vol.518, pp.7312-7315, 2010.

H. Liu, J. Tao, J. Xu, Z. Chen, and Q. Gao, Corrosion and tribological behaviors of chromium oxide coatings prepared by the glow-discharge plasma technique, Surf Coat Technol, vol.204, pp.28-36, 2009.

F. Luo, K. Gao, X. Pang, H. Yang, L. Qiao et al., Characterization of the mechanical properties and failure modes of hard coatings deposited by RF magnetron sputtering, Surf Coat Technol, vol.202, pp.3354-3359, 2008.

F. Luo, X. Pang, K. Gao, H. Yang, and Y. Wang, Role of deposition parameters on microstructure and mechanical properties of chromium oxide coatings, Surf Coat Technol, vol.202, pp.58-62, 2007.

S. Mahieu and D. Depla, Reactive sputter deposition of TiN layers: modelling the growth by characterization, J Phys D Appl Phys, vol.42, p.53002, 2009.

T. Mori, S. Fukuda, and Y. Takemura, Improvement of mechanical properties of Ti/TiN multilayer film deposited by sputtering, Surf Coat Technol, vol.140, pp.1021-1021, 2001.

K. Rahmoun, A. Iost, V. Keryvin, G. Guillemot, C. Sari et al., A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films, Thin Solid Films, vol.518, pp.213-221, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01170940

W. D. Sproul, Reactive sputter deposition of polycrystalline nitride and oxide superlattice coatings, Surf Coat Technol, vol.87, issue.96, pp.2977-2982, 1996.

Z. Wang, D. Zhang, P. Ke, X. Liu, and A. Wang, Influence of substrate negative bias on structure and properties of TiN coatings prepared by hybrid HIPIMS method, J Mater Sci Technol, vol.31, pp.37-42, 2015.

J. Yue, Y. Liu, and G. Li, Microstructure and mechanical properties of VN/SiO 2 nanomultilayers synthesized by reactive sputtering, Mater Lett, vol.62, pp.1621-1623, 2008.