, Technical data ,sheet Tycor W-series type foam materials, pp.2015-2017

A. Ibrahim, Wind turbines e adaptive bend-torsional coupling wind turbine blade design imitating the topology structure of natural plant leaves, 2011.

C. Alberto and P. Marco, Influence of the interface bonding strength on brittle crack propagation in bi-material structural components, 15th European Conference on Fract (ECF), 2004.

A. Thomas and D. , Passive load control for large wind turbines, 51st Aiaa/ Asme/Asce/Ahs/Asc structures, structural dynamics, and materials conference, 2010.

A. Nicholas and S. , Design and finite element analysis of ocean current turbine blade Mts/Ieee Biloxi e Marine Technology for Our Future Global and Local Challenges 1e6, 2009.

A. Francesco, Effect of stitching on the static and fatigue performance of Co-cured composite single-lap joints, J Compos Mater, vol.38, pp.243-57, 2004.

F. Sorensen-bent, J. Erik, D. Christian, P. , J. Find et al., Improved design of large wind turbine blade of fibre composites based on studies of scale effects (Phase 1), 2004.

B. Paul, A. , and D. Geoff, Parametric modeling of large wind turbine blades Abaqus UK regional user meeting, 2007.

B. Povl, N. Rogier, and P. L. , Advances in wind turbine blade design and materials, 2013.

Z. Chenyu, W. Simon, and X. Huimin, Static structural analysis of parked composite wind turbine blades, Proceedings of the 8th international conference on structural dynamic, pp.3395-3404, 2011.

C. Sickinger and A. Herrmann, Structural Stitching as a Method to design High-Performance Composites in Future Hermann von Helmholtz Group of German Research Centres, 2001.

U. Shah-darshil, S. Peter, J. , C. Mike, and J. , Can flax replace E-glass in structural composites? A small wind turbine blade case study, Compos Part B Eng, vol.52, pp.172-81, 2013.

D. S. Zarouchas, A. A. Makris, F. Sayer, D. Van-hemelrijck, and A. M. Van-wingerde, Investigations on the mechanical behavior of a wind rotor blade subcomponent, Compos Part B e Eng, vol.43, pp.647-54, 2012.

G. Stephen, Finite element analysis of steel and composite gusset plates in a warren truss bridge using Abaqus, 2012.

D. Gaoming, . Mishnaevsky, and . Leon, Carbon nanotube reinforced hybrid composites: computational modeling of environmental fatigue and usability for wind blades, Compos Part B-Eng, vol.78, pp.349-60, 2015.

G. P. Zou, K. Shahin, and F. Taheri, An analytical solution for the analysis of symmetric composite adhesively bonded joints, Compos Struct, vol.65, pp.499-510, 2004.

S. A. Herman, Analysis of transport and installation costs, 2002.

T. Ikeda, Fiber-reinforced composite cable, US Patent, vol.5, p.193, 1992.

C. Jui-sheng, C. Chien-kuo, C. Huang-i-kui, and . Kai-ning, Failure analysis of wind turbine blade under critical wind loads, Eng Fail Anal, vol.27, pp.99-118, 2013.

E. Cox-kevin and . Andreas, Structural design and analysis of a 10MW wind turbine blade, Energy Procedia, vol.24, 2012.

. Cox-kevin and A. Echtermeyer, Geometric scaling effects of bend-twist coupling in rotor blades, Energy Procedia, vol.35, pp.2-11, 2013.

H. Khazar and H. S. Kyu, Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates composites, Compos Struct, vol.128, pp.122-155, 2015.

K. P. Subrahmanian and D. Fabrice, Adhesives for bonding wind turbine blades, Reinf Plast, vol.53, pp.26-35, 2009.

L. Tong and L. K. Jain, Analysis of adhesive bonded composite lap joints with transverse stitching, Appl Compos Mater, vol.2, 1995.

L. Frank, A. , G. Donato, D. Carlos, and G. , Progressive damage analysis of bonded composite joints, 2012.

W. Lobitz-don, V. Paul, and S. , Aeroelastic behavior of twist-coupled hawt blades, ASME wind energy symposium AIAA-98-0029, 1998.

M. S. Kim, C. Y. Park, and S. M. , Failure analysis of adhesively bonded joints consisting of bi-layer composites, 18th International conference on composite materials

M. Shokrieh-mahmood and R. Roham, Simulation of fatigue failure in a full composite wind turbine blade, Compos Struct, vol.74, pp.332-374, 2006.

M. E. Bechly and P. D. Clausent, Structural design of a composite wind turbine blade using finite element analysis, Comput Struct, vol.63, pp.39-616, 1997.

, Muthirakkal s, Narasimha murthy hnr, Krishna m.-Rai ks, Karippal jj. Hygrothermic behaviour of carbon/vinylester, glass/vinylester, carbon/epoxy and glass/epoxy composites, Iran Polym J, vol.19, issue.2, 2010.

, Composite materials handbook, vol.2, 1999.

P. Sam, Targeting composite wing performance optimising the composite lay-up design, Altair Eng, pp.16-17, 2009.

V. Paul, S. , A. Thomas, D. , S. Herbert et al., Trends in the design, manufacture and evaluation of wind turbine blades, Wind energy, vol.6, pp.245-59, 2003.

P. B. Stickler, M. Ramulu, and P. S. Johnson, Experimental and numerical analysis of transverse stitched T-joints in bending, Compos Struct, vol.50, 2000.

R. Joven, R. Das, A. Ahmed, P. Roozbehjavan, and B. Minaie, In: Thermal properties of carbon fiber-epoxy composites with different fabric weaves Conference paper, 2012.

W. Sawyer-james, Effect of stitching on the strength of bonded composite single lap joints, AIAA J, vol.24, 1985.

S. Smeltzer and . Stanley, Analytical and Numerical Results for an Adhesively Bonded Joint Subjected to Pure Bending, 47th Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics, and Materials Conference, 2006.

G. Taghavi-shahriar, Moisture effects on high performance polymer composites, 2000.

K. Ushijima, Cable made of high strength fiber composite material, US Patent, vol.7, p.742, 2010.

H. Yi, K. Ananth-ram, G. Mahanth, and . Linxia, Elasticplastic analysis and strength evaluation of adhesive joints in wind turbine blades, Compos Part B e Eng, vol.44, pp.650-656, 2013.

L. Zhimin, L. Chun, G. Wei, and W. Yulong, Effect of layup design on properties of wind turbine blade, Front Eng Mech Res, vol.2, 2013.