E. Olakanmi, R. Cochrane, and K. Dalgarno, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties, Progress in Materials Science, vol.74, pp.401-477, 2015.

S. Siddique, M. Imran, and F. Walther, Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy, International Journal of Fatigue, vol.94, pp.246-254, 2017.

K. Yang, P. Rometsch, T. Jarvis, J. Rao, S. Cao et al., Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting, Materials Science and Engineering: A, vol.712, pp.166-174, 2018.

S. Romano, A. Brückner-foit, A. Brandão, J. Gumpinger, T. Ghidini et al., Fatigue properties of AlSi10mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength, Engineering Fracture Mechanics, vol.187, pp.165-189, 2018.

Y. Murakami, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, p.395, 2002.

T. Kitagawa, Applicability of fracture mechanics to very small cracks, ASM Proceedings of 2nd international conference on mechanical Metalspark, pp.627-631, 1976.

M. E. Haddad, T. Topper, and K. Smith, Prediction of non propagating cracks, Engineering Fracture Mechanics, vol.11, issue.3, pp.573-584, 1979.

V. Le, Etude de l'influence des hétérogénéités microstructurales sur la tenue en fatigueà grand nombre de cycles des 400 alliages d'aluminium de fonderie, 2016.

K. J. Miller, The Short Crack Problem, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.3, pp.223-232, 1982.

L. Susmel, The theory of critical distances: a review of its applications in fatigue, Engineering Fracture Mechanics, vol.75, issue.7, pp.1706-1724, 2008.

D. Taylor, Geometrical effects in fatigue: a unifying theoretical model, International Journal of Fatigue, vol.21, issue.5, pp.7-9, 1999.

D. Taylor, Prediction of fatigue failure location on a component using a critical distance method, International Journal of Fatigue, vol.22, issue.9, pp.735-742, 2000.

M. E. May, N. Saintier, T. Palin-luc, and O. Devos, Non-local high cycle fatigue strength criterion for metallic materials with 410 corrosion defects, Fatigue & Fracture of Engineering Materials & Structures, vol.38, issue.9, pp.1017-1025, 2015.

Y. Nadot and T. Billaudeau, Multiaxial fatigue limit criterion for defective materials, Engineering Fracture Mechanics, vol.73, issue.1, pp.112-133, 2006.

B. Vayssette, N. Saintier, C. Brugger, M. El-may, and E. Pessard, Numerical modelling of surface roughness effect on the 415 fatigue behavior of Ti-6al-4v obtained by additive manufacturing, International Journal of Fatigue, vol.123, pp.180-195, 2019.

S. Siddique, M. Imran, M. Rauer, M. Kaloudis, E. Wycisk et al., Computed tomography for characterization of fatigue performance of selective laser melted parts, Materials & Design, vol.83, pp.661-669, 2015.

A. Fatemi, R. Molaei, S. Sharifimehr, N. Phan, and N. Shamsaei, Multiaxial fatigue behavior of wrought and additive manufactured Ti-6al-4v including surface finish effect, International Journal of Fatigue, vol.100, pp.347-366, 2017.

A. Borbély, H. Mughrabi, G. Eisenmeier, and H. Höppel, A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation, International Journal of Fracture, vol.115, pp.227-232, 2002.

Y. Gao, J. Yi, P. Lee, and T. Lindley, The effect of porosity on the fatigue life of cast aluminium-silicon alloys, Fatigue & Fracture of Engineering Materials and Structures, vol.27, issue.7, pp.559-570, 2004.

I. Serrano-munoz, Influence of casting defects on the fatigue behaviour of an A357-T6 aerospace alloy, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01175494

I. Serrano-munoz, J. Buffiere, C. Verdu, Y. Gaillard, P. Mu et al., Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy, International Journal of Fatigue, vol.82, pp.361-370, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01669968

G. Henaff, G. Odemer, and A. Tonneau-morel, Environmentally-assisted fatigue crack growth mechanisms in advanced materials for aerospace applications, International Journal of Fatigue, vol.29, issue.9, 2007.

S. Romano, A. Brandão, J. Gumpinger, M. Gschweitl, and S. Beretta, Qualification of AM parts: Extreme value statistics applied to tomographic measurements, Materials & Design, vol.131, pp.32-48, 2017.

Y. Murakami and M. Endo, Quantitative evaluation of fatigue strength of metals containing various small defects or cracks, Engineering Fracture Mechanics, vol.17, issue.1, pp.1-15, 1983.

J. Buffière, S. Savelli, P. Jouneau, E. Maire, and R. Fougères, Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast Al alloys, Materials Science and Engineering: A, vol.316, issue.1-2, pp.115-126, 2001.

P. J. Armstrong and C. O. Frederick, A mathematical representation of the multiaxial Bauschinger effect, 1966.

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of fan alloy steel, Proceedings of the international conference on fatigue of metals, pp.138-149, 1956.

S. Romano, A. Abel, J. Gumpinger, A. Brandão, and S. Beretta, Quality control of AlSi10mg produced by SLM: Metallography versus CT scans for critical defect size assessment, Additive Manufacturing, vol.28, pp.394-405, 2019.

P. Mu, Y. Nadot, C. Nadot-martin, A. Chabod, I. Serrano-munoz et al., Influence of casting defects on the fatigue behavior of cast aluminum AS7g06-T6, International Journal of Fatigue, vol.63, pp.97-109, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01808029

P. Mu, Y. Nadot, I. Serrano-munoz, and A. Chabod, Multiaxial fatigue design of cast parts, Influence of complex defect on cast AS7g06-T6, vol.131, pp.315-328, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01808053