On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature

Yaroslav Rae (1) , X. Guo (1) , Adil Benaarbia (2) , Nigel Neate (1) , Wei Sun (1)

1 UON - University of Nottingham, UK
2 LEM3 - Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux

In order to better understand the physical process of deformation and cyclic softening a 12% Cr martensitic stainless steel FV566 has been cyclically tested at high temperature in strain control. Increase in temperature was found to increase the cyclic life, softening rate and viscous stress magnitude. An increase in the dwell time led to the acceleration of the material degradation. The microstructure changes and dominating deformation mechanisms were investigated by means of scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. The results have revealed a gradual sub-grain coarsening, transformation of lath structure into fine equiaxed subgrains, and misorientation angle development in blocks and packets until material failure. The softening behaviour was attributed to the mutual annihilation.

Mots clés: Mechanical Engineering; General Materials Science; Mechanics of Materials; Condensed Matter Physics

Domaines: Matériaux; Mécanique des matériaux [physics.class-ph]

Yaroslav Rae, X. Guo, Adil Benaarbia, Nigel Neate, Wei Sun. On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature. Materials Science and Engineering: A, 2020, 773, pp.138864. ⟨10.1016/j.msea.2019.138864⟩. ⟨hal-02466897⟩