J. R. Katz, Was sind die Ursachen der eigentümlichen Dehnbarkeit des Kautschuks? -ueber die Aenderung des R? ontgenspektrums des Kautschuks bei der Dehnung, vol.36, pp.300-307, 1925.

C. W. Bunn, Molecular structure and rubber-like elasticity. I. The crystal structures of ?-gutta-percha, rubber and polychloroprene, Rubber Chem. Technol, vol.15, pp.709-730, 1942.

G. Rajkumar, J. M. Squire, and S. Arnott, A new structure for crystalline natural rubber, vol.39, pp.7004-7014, 2006.

G. Lebourvellec, L. Monnerie, and J. P. Jarry, Amorphous orientation and induced crystallization in uniaxially stretched poly(ethylene terephthalate glycol), vol.27, pp.90294-90300, 1986.

G. L. Bourvellec and J. Beautemps, Stretching of PET films under constant load. II. Structural analysis, J. Appl. Polym. Sci, vol.39, pp.329-339, 1990.

D. J. Blundell, D. H. Mackerron, W. Fuller, A. Mahendrasingam, C. Martin et al., Characterization of strain-induced crystallization of poly(ethylene terephthalate) at fast draw rates using synchrotron radiation, Polymer (Guildf), vol.37, p.88476, 1996.

A. C. Middleton, R. A. Duckett, I. M. Ward, A. Mahendrasingam, and C. Martin, Real-time FTIR and WAXS studies of drawing behavior of poly(ethylene terephthalate) films, J. Appl. Polym. Sci, vol.79, pp.1825-1837, 2001.

E. Gorlier, J. M. Haudin, and N. Billon, Strain-induced crystallisation in bulk amorphous PET under uni-axial loading, Polymer (Guildf), vol.42, pp.9541-9549, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00536370

D. Kawakami, B. S. Hsiao, S. Ran, C. Burger, B. Fu et al., Structural formation of amorphous poly(ethylene terephthalate) during uniaxial deformation above glass temperature, Polymer (Guildf), vol.45, pp.905-918, 2004.

D. Kawakami, B. S. Hsiao, C. Burger, S. Ran, C. Avila-orta et al., Deformation-induced phase transition and superstructure formation in poly(ethylene terephthalate), Macromolecules, vol.38, pp.91-103, 2005.

D. Kawakami, S. Ran, C. Burger, C. Avila-orta, I. Sics et al., Superstructure evolution in poly(ethylene terephthalate) during uniaxial deformation above glass transition temperature, Macromolecules, vol.39, pp.2909-2920, 2006.

D. Kawakami, S. Ran, C. Burger, B. Fu, I. Sics et al., Mechanism of structural formation by uniaxial deformation in amorphous poly(ethylene terephthalate) above the glass temperature, Macromolecules, vol.36, pp.9275-9280, 2003.

D. Kawakami, C. Burger, S. Ran, C. Avila-orta, I. Sics et al., New insights into lamellar structure development and SAXSA/WAXD sequence appearance during uniaxial stretching of amorphous polyethylene terephthalate above glass transition temperature, Macromolecules, vol.41, pp.2859-2867, 2008.

D. R. Salem, Development of crystalline order during hot-drawing of poly(ethylene terephthalate) film: influence of strain rate, Polymer (Guildf), vol.33, pp.3182-3188, 1992.

A. Ajji, K. C. Cole, M. M. Dumoulin, and J. Brisson, Amorphous orientation of poly (ethylene terephthalate) by X-ray diffraction in combination with Fourier transform infra-red spectroscopy, Polymer (Guildf), vol.36, pp.90981-90988, 1995.

A. Mahendrasingam, C. Martin, A. Jaber, D. Hughes, W. Fuller et al., Time-resolved X-ray wide angle scattering studies of the effect of draw rate and temperature on the development of orientation and crystallinity in PET, Nucl. Instrum. Methods Phys. Res. B, vol.97, pp.377-384, 1995.

A. Ajji, J. Gu?-evremont, K. C. Cole, and M. M. Dumoulin, Polymer (Guildf), Orientation and structure of drawn poly(ethylene terephthalate), vol.37, pp.175-184, 1996.

R. D. Daubeny, The crystal structure of polyethylene terephthalate, Proc. R. Soc. Lond. Ser A Math. Phys. Sci, vol.226, pp.531-542, 1954.

S. K. Burgess, J. E. Leisen, B. E. Kraftschik, C. R. Mubarak, R. M. Kriegel et al., Chain mobility, thermal, and mechanical properties of poly(ethylene furanoate) compared to poly(ethylene terephthalate), Macromolecules, vol.47, pp.1383-1391, 2014.

S. K. Burgess, R. M. Kriegel, and W. J. Koros, Carbon dioxide sorption and transport in amorphous poly(ethylene furanoate), Macromolecules, vol.48, pp.2184-2193, 2015.

S. K. Burgess, O. Karvan, J. R. Johnson, R. M. Kriegel, and W. J. Koros, Oxygen sorption and transport in amorphous poly(ethylene furanoate), vol.55, pp.4748-4756, 2014.

S. K. Burgess, D. S. Mikkilineni, D. B. Yu, D. J. Kim, C. R. Mubarak et al., Water sorption in poly(ethylene furanoate) compared to poly(ethylene terephthalate). Part 2: kinetic sorption, Polymer (Guildf), vol.55, pp.6870-6882, 2014.

G. Z. Papageorgiou, V. Tsanaktsis, and D. N. Bikiaris, Synthesis of poly(ethylene furandicarboxylate) polyester using monomers derived from renewable resources: thermal behavior comparison with PET and PEN, Phys. Chem. Chem. Phys, vol.16, pp.7946-7958, 2014.

R. J. Knoop, W. Vogelzang, J. Van-haveren, and D. S. Van-es, High molecular weight poly(ethylene-2,5-furanoate); critical aspects in synthesis and mechanical property determination, J. Polym. Sci. Part A Polym. Chem, vol.51, pp.4191-4199, 2013.

J. G. Van-berkel, N. Guigo, J. J. Kolstad, L. Sipos, B. Wang et al., Isothermal crystallization kinetics of poly (ethylene 2,5-furandicarboxylate), Macromol. Mater. Eng, vol.300, pp.466-474, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01150884

G. Stoclet, G. Gobius-du-sart, B. Yeniad, S. De-vos, and J. M. Lefebvre, Isothermal crystallization and structural characterization of poly(ethylene-2,5-furanoate), Polymer (Guildf), vol.72, pp.165-176, 2015.

A. Codou, N. Guigo, J. Van-berkel, E. Jong, and N. Sbirrazzuoli, Non-isothermal crystallization kinetics of biobased poly(ethylene 2,5-furandicarboxylate) synthesized via the direct esterification process, Macromol. Chem. Phys, vol.215, pp.2065-2074, 2014.

A. Codou, M. Moncel, J. G. Van-berkel, N. Guigo, and N. Sbirrazzuoli, Glass transition dynamics and cooperativity length of poly(ethylene 2,5-furandicarboxylate) compared to poly(ethylene terephthalate), Phys. Chem. Chem. Phys, vol.18, pp.16647-16658, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01336898

Y. Mao, D. G. Bucknall, and R. M. Kriegel, Synchrotron X-ray scattering study on amorphous poly(ethylene furanoate) under uniaxial deformation, Polymer (Guildf), vol.139, pp.60-67, 2018.

G. Stoclet, J. M. Lefebvre, B. Yeniad, G. Gobius-du-sart, and S. De-vos, On the straininduced structural evolution of Poly(ethylene-2,5-furanoate) upon uniaxial stretching: an in-situ SAXS-WAXS study, Polymer (Guildf), vol.134, pp.227-241, 2018.

C. Menager, N. Guigo, L. Martino, N. Sbirrazzuoli, H. Visser et al., Strain induced crystallization in biobased Poly (ethylene 2,5-furandicarboxylate) (PEF); conditions for appearance and microstructure analysis, Polymer (Guildf), vol.158, pp.364-371, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01987924

J. G. Van-berkel, N. Guigo, J. J. Kolstad, and N. Sbirrazzuoli, Biaxial orientation of poly (ethylene 2,5-furandicarboxylate): an explorative study, Macromol. Mater. Eng, vol.303, p.1700507, 2018.

C. E. Federico, J. L. Bouvard, C. Combeaud, and N. Billon, Large strain/time dependent mechanical behaviour of PMMAs of different chain architectures. Application of time-temperature superposition principle, Polymer (Guildf), 2018.
URL : https://hal.archives-ouvertes.fr/hal-01723367

V. Fabre, G. Quandalle, N. Billon, and S. Cantournet, Time-Temperature-Water content equivalence on dynamic mechanical response of polyamide 6, Polymer (Guildf), vol.6, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01112802

G. Quandalle, Study and Mechanical Modeling of the Strain-Induced-Crystallization of Polymers : Crosslinked Naturel Rubber and PET, 2017.
URL : https://hal.archives-ouvertes.fr/tel-01774634

L. G. Kazaryan and F. M. Medvedeva, X-Ray study of the structure of the polyester of furan-2, 5-dicarboxylic acid, Vysokomol. Soedin. Seriya B, vol.10, 1968.

Y. Mao, R. M. Kriegel, and D. G. Bucknall, The crystal structure of poly, Polymer (Guildf), vol.102, pp.308-314, 2016.

E. Gorlier, J. F. Agassant, J. M. Haudin, and N. Billon, Experimental and theoretical study of uniaxial deformation of amorphous poly(ethylene terephthalate) above glass transition temperature, Plast. Rubber Compos, vol.30, pp.48-55, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01654657

N. Billon, M. Picard, and E. Gorlier, Stretch blow moulding of PET; structure development and constitutive model, Int. J. Material Form, vol.7, pp.369-378, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00820970