, The European Commission regulatory proposal for post-2020 CO2 targets for cars and vans: A summary and evaluation, 2018.

T. Johnson and A. Joshi, Review of Vehicle Engine Efficiency and Emissions, SAE Technical, 2018.

A. Prakash, J. Redmann, K. Giles, and R. Cracknell, Octane Response of a Highly Boosted Direct Injection Spark Ignition Engine at Different Compression Ratios, SAE Technical, 2018.

J. Heywood, Internal combustion engine, 1988.

, Formula One Technical Regulations, 2018.

V. Knop, M. Loos, C. Pera, J. , and N. , A linear-by-mole blending rule for octane numbers of n-heptane/iso-octane/toluene mixtures, Fuel, vol.115, pp.666-673, 2014.

N. Rankovic, G. Bourhis, M. Loos, and R. Dauphin, Understanding octane number evolution for enabling alternative low RON refinery streams and octane boosters as transportation fuels, Fuel, vol.150, pp.41-47, 2015.

N. Morgan, A. Smallbone, A. Bhave, M. Kraft, R. Cracknell et al., Mapping surrogate gasoline compositions into RON/MON space, Combustion and Flame, vol.157, issue.6, pp.1122-1131, 2010.

R. Bradow, A. , and M. , Analytical investigations of isooctane and diisobutylene slow combustion in an Otto-cycle engine, Combustion and Flame, vol.11, pp.90006-90011, 1967.

T. M. Foong, K. J. Morganti, M. J. Brear, G. Da-silva, Y. Yang et al., The octane numbers of ethanol blended with gasoline and its surrogates, Fuel, vol.115, pp.727-739, 2014.

F. Jarrosson, Y. Fenard, G. Vanhove, and R. Dauphin, Gasoline and Combustion: Relationship between Molecular Structure and Performance, SAE Technical, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02333490

M. A. Barrufet, Reservoir Fluids, Petroleum Engineering, Pure components Data

M. Boot, M. Tian, E. Hensen, and M. Sarathy, Impact of fuel molecular structure on auto-ignition behavior -Design rules for future high performance gasolines, Progress in Energy and Combustion Science, vol.60, pp.1-25, 2017.

R. Cracknell, W. Warnecke, J. Redmann, and T. K. Goh, Octane Requirements of Modern Downsized Boosted Gasoline Engines, MTZ, vol.76, pp.4-7, 2015.

G. T. Kalghatgi, Fuel Anti-Knock Quality-Part II. Vehicle Studies -How Relevant is Motor Octane Number (MON) in Modern Engines?, SAE Technical Paper, 2001.

G. Kalghatgi, K. Nakata, and K. Mogi, Octane Appetite Studies in Direct Injection Spark Ignition (DISI) Engines, 2005.

G. T. Kalghatgi, Fuel Anti-Knock Quality -Part I. Engine Studies, SAE Technical Paper, 2001.

Z. Lu, Y. Yang, and M. J. Brear, Oxidation of PRFs and ethanol/iso-octane mixtures in a flow reactor and the implication for their octane blending, Proceedings of the Combustion Institute, 2018.

K. P. Somers, R. F. Cracknell, and H. J. Curran, A chemical kinetic interpretation of the octane appetite of modern gasoline engines, Proceedings of the Combustion Institute, 2018.

Y. Yu, G. Vanhove, J. F. Griffiths, S. De-ferrières, and J. Pauwels, Influence of EGR and Syngas Components on the Autoignition of Natural Gas in a Rapid Compression Machine: A Detailed Experimental Study, Energy Fuels, vol.27, issue.7, pp.3988-3996, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01738389

Y. Fenard, M. Boumehdi, and G. Vanhove, Experimental and Kinetic Modeling Study of 2-Methyltetrahydrofuran Oxidation under Engine-Relevant Conditions, Combustion and Flame, vol.178, pp.168-181, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01738366

S. S. Goldsborough, A. Fridlyand, J. Santner, T. Rockstroh, and M. C. Jespersen, Heat release analysis for rapid compression machines: Challenges and opportunities, Proceedings of the Combustion Institute, 2018.

A. Comandini, G. Pengloan, S. Abid, and N. Chaumeix, Experimental and modeling study of styrene oxidation in spherical reactor and shock tube, Combustion and Flame, vol.173, pp.425-440, 2016.

A. Comandini, T. Dubois, S. Abid, and N. Chaumeix, Comparative study on cyclohexane and decalin oxidation, Energy Fuels, vol.28, issue.1, pp.714-724, 2014.

, Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

G. Vanhove, G. Petit, and R. Minetti, Experimental study of the kinetic interactions in the low-temperature autoignition of hydrocarbon binary mixtures and a surrogate fuel, Combustion and Flame, vol.145, pp.521-532, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01738404

A. Roubaud, R. Minetti, and L. R. Sochet, Oxidation and combustion of low alkylbenzenes at high pressure: comparative reactivity and auto-ignition, Combustion and Flame, vol.121, pp.535-541, 2000.

E. Singh, J. Badra, M. Mehl, and M. Sarathy, Chemical Kinetic Insights into the Octane Number and Octane Sensitivity of Gasoline Surrogate Mixtures, Energy & Fuels, vol.31, 1945.

H. Song and H. Song, Knock Prediction of Two-Stage Ignition Fuels with Modified Livengood-Wu Integration Model by Cool Flame Elimination Method, SAE Technical Paper, 2016.