T. Alam, S. Nicaise, and L. Paquet, An optimal control problem governed by heat equation with nonconvex constraints applied to selective laser melting process, Hal preprint, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02302403

G. , Multi-phase structural optimization via a level set method, ESAIM Control Optim. Calc. Var, vol.20, pp.576-611, 2014.

G. Allaire, Conception Optimale de Structures, vol.58

. Springer-verlag, , 2007.

G. Allaire and B. Bogosel, Optimizing supports for additive manufacturing, Structural and Multidisciplinary Optimization, vol.58, pp.2493-2515, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01769324

G. Allaire and L. Jakab?in, Taking into Account Thermal Residual Stresses in Topology Optimization of Structures Built by Additive Manufacturing, Mathematical Models and Methods in Applied Sciences, vol.28, pp.2313-2366, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01666081

G. Allaire, F. Jouve, and A. Toader, Structural Optimization Using Sensitivity Analysis and a Level-Set Method, Journal of Computational Physics, vol.194, pp.363-393, 2004.

G. Allaire, F. Jouve, and N. Van-goethem, Damage and fracture evolution in brittle materials by shape optimization methods, J. Comput. Phys. 230, vol.12, pp.5010-5044, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00784048

E. M. Arkin, M. Held, and C. L. Smith, Optimization Problems Related to Zigzag Pocket Machining, Algorithmica 26, pp.197-236, 2000.

C. Barlier and A. Bernard, Fabrication Additive -Du Prototypage Rapideà l'impression 3D. Dunod, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02396264

I. Alexander and . Bobenko, Geometry II: Discrete Differential Geometry

M. Boissier, Coupling topology optimization methods and trajectory optimization methods in additive manufacturing

M. Bouard, V. Pateloup, and P. Armand, Pocketing Toolpath Computation Using an Optimization Method, Computer-Aided Design, vol.43, issue.9, pp.1099-1109, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00682780

M. Burger, A Framework for the Construction of Level Set Methods for Shape Optimization and Reconstruction, In: Interfaces and Free Boundaries, vol.5, pp.301-329, 2002.

L. N. Carter, M. M. Attallah, and R. C. Reed, Laser Powder Bed Fabrication of Nickel-Base Superalloys: Influence of Parameters; Characterisation, Quantification and Mitigation of Cracking, Superalloys 2012, pp.577-586, 2012.

J. Céa, Conception Optimale Ou Identification de Formes: Calcul Rapide de La Dérivée Directionnelle de La Fonction Coût, RAIRO Modélisation Mathématique et Analyse Numérique, vol.20, pp.371-402, 1986.

Q. Chen, Three-Dimensional Finite Element Thermomechanical Modeling of Additive Manufacturing by Selective Laser Melting for Ceramic Materials, Additive Manufacturing, vol.16, pp.124-137, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01552410

K. Chudej, Instationary Heat-Constrained Trajectory Optimization of a Hypersonic Space Vehicle by ODE-PDE-Constrained Optimal Control, Variational Analysis and Aerospace Engineering, vol.33, pp.127-144, 2009.

K. Dai and L. Shaw, Distortion Minimization of Laser-processed Components through Control of Laser Scanning Patterns, Rapid Prototyping Journal, vol.8, issue.5, pp.270-276, 2002.

T. Debroy, Additive Manufacturing of Metallic Components Process, Structure and Properties, Progress in Materials Science 92, pp.112-224, 2018.

D. Ding, A practical path planning methodology for wire and arc additive manufacturing of thinwalled structures, In: Robotic and Computer-Integrated Manufacturing, vol.34, pp.8-19, 2015.

K. Ettaieb, C. Sylvain-lavernhe, and . Tournier, Thermal simulation of scanning paths in LBM additive manufacturing, Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02422198

W. Gao, The Status, Challenges, and Future of Additive Manufacturing in Engineering, Computer-Aided Design, vol.69, pp.65-89, 2015.

M. Gerdts, Optimal Control of ODEs and DAEs, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00724908

F. Hecht, New Development in Freefem++, Journal of Numerical Mathematics, vol.20, pp.251-265, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01476313

A. Henrot and M. Pierre, Shape Variation and Optimization, vol.28, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02094871

R. Herzog and K. Kunisch, Algorithms for PDE-Constrained Optimization, GAMM-Mitteilungen, vol.33, pp.163-176, 2010.

J. Jhabvala, On the Effect of Scanning Strategies in the Selective Laser Melting Process, Virtual and Physical Prototyping, vol.5, pp.99-109, 2010.

Y. Jin, Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology, Additive Manufacturing. Inaugural Issue, vol.1, pp.32-47, 2014.

S. Kimmerle, M. Gerdts, and R. Herzog, Optimal Control of an Elastic Crane-Trolley-Load System-a Case Study for Optimal Control of Coupled ODE-PDE Systems, Mathematical and Computer Modelling of Dynamical Systems. Methods, Tools and Applications in Engineering and Related Sciences, vol.24, pp.182-206, 2018.

M. Langelaar, Combined Optimization of Part Topology, Support Structure Layout and Build Orientation for Additive Manufacturing, Structural and Multidisciplinary Optimization, vol.57, pp.1985-2004, 2018.

J. Lions, Contrôle Optimal de Systèmes Gouvernés Par DesÉquations Aux Dérivées Partielles, 1968.

J. Liu and A. C. To, Deposition Path Planning-Integrated Structural Topology Optimization for 3D Additive Manufacturing Subject to Self-Support Constraint, Computer-Aided Design, vol.91, pp.27-45, 2017.

J. Liu, Current and Future Trends in Topology Optimization for Additive Manufacturing, Structural and Multidisciplinary Optimization, vol.57, pp.2457-2483, 2018.

E. Liverani, Effect of Selective Laser Melting (SLM) Process Parameters on Microstructure and Mechanical Properties of 316L Austenitic Stainless Steel, Journal of Materials Processing Technology, vol.249, pp.255-263, 2017.

L. Ma and H. Bin, Temperature and Stress Analysis and Simulation in Fractal Scanning-Based Laser Sintering, The International Journal of Advanced Manufacturing Technology, vol.34, pp.898-903, 2007.

E. Maitre, Review of numerical methods for free interfaces, Les Houches, vol.27, p.31, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00388172

M. Megahed, Metal Additive-Manufacturing Process and Residual Stress Modeling, Integrating Materials and Manufacturing Innovation, vol.5, pp.61-93, 2016.

P. Mercelis and J. Kruth, Residual Stresses in Selective Laser Sintering and Selective Laser Melting, Rapid prototyping journal, vol.12, issue.5, pp.254-265, 2006.

M. Amir, K. Mirzendehdel, and . Suresh, Support Structure Constrained Topology Optimization for Additive Manufacturing, Computer-Aided Design, vol.81, pp.1-13, 2016.

S. Mohanty and J. Hattel, Cellular Scanning Strategy for Selective Laser Melting: Capturing Thermal Trends with a Low-Fidelity, Pseudo-Analytical Model, Mathematical Problems in Engineering, 2014.

F. Murat, J. Simon, and ;. G. Goos, Etude de Problemes d'optimal Design". In: Optimization Techniques Modeling and Optimization in the Service of Man Part 2, vol.41, pp.54-62, 1976.

J. Nocedal and S. J. Wright, Numerical Optimization. Second, Springer Series in Operations Research and Financial Engineering, 2006.

O. Pantz, Sensibilité de l'équation de la chaleur aux sauts de conductivité, C. R. Math. Acad. Sci. Paris, vol.341, pp.333-337, 2005.

X. Peng, K. Niakhai, and B. Protas, A method for geometry optimization in a simple model of twodimensional heat transfer, SIAM J. Sci. Comput, vol.35, pp.1105-1131, 2013.

P. Romon, Introductionà La Géométrie Différentielle Discrète. Références Sciences, 2013.

F. Royer, Fonctionnement et singularités du procédé de fusion laser sélective : Illustration par applicationà deux superalliagesà base nickel et considérationsénergétiques, 2014.

B. Schoinochoritis, D. Chantzis, and K. Salonitis, Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review, Proceedings of the Institution of Mechanical Engineers, vol.231, pp.96-117, 2017.

E. Stathatos and G. Vosniakos, Real-Time Simulation for Long Paths in Laser-Based Additive Manufacturing: A Machine Learning Approach, The International Journal of Advanced Manufacturing Technology, 2019.

J. Hao-tan, W. Leong-eugene, K. W. Wong, and . Dalgarno, An Overview of Powder Granulometry on Feedstock and Part Performance in the Selective Laser Melting Process, Additive Manufacturing, vol.18, pp.228-255, 2017.

. Mary-kathryn-thompson, Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints, CIRP Annals, vol.65, pp.737-760, 2016.

, Emmanuel Trélat. Contrôle Optimal. Vuibert, 2008.

G. Tryggvason, A Front-Tracking Method for the Computations of Multiphase Flow, Journal of Computational Physics, vol.169, pp.708-759, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02146147

L. Van-belle, G. Vansteenkiste, and J. C. Boyer, Investigation of residual stresses induced during the selective laser melting process, pp.1828-1834, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00824655

A. Vandone, S. Baraldo, and A. Valente, Multisensor Data Fusion for Additive Manufacturing Process Control, IEEE Robotics and Automation Letters, vol.3, pp.3279-3284, 2018.

S. Wendl, H. J. Pesch, and A. Rund, On a State-Constrained PDE Optimal Control Problem Arising from ODE-PDE Optimal Control, pp.429-438

S. Wendl, On a Prototype of an Optimal Control Problem Governed by Ordinary and Partial Differential Equations, 2014.

V. Kaufui, A. Wong, and . Hernandez, A Review of Additive Manufacturing, ISRN Mechanical Engineering, 2012.

A. S. Wu, An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel, Metallurgical and Materials Transactions A 45, vol.13, pp.6260-6270, 2014.