M. Howe, On the theory of unsteady high Reynolds number flow through a circular aperture, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, vol.366, issue.1725, pp.205-223, 1979.

L. Zhou and H. Boden, The effect of combined high level acoustic excitation and bias flow on the acoustic properties of an in-duct orifice, 19th AIAA/CEAS Aeroacoustics conference, pp.2013-2128, 2013.

C. Heuwinkel, L. Enghardt, F. Bake, S. Sadig, and M. Gerendas, Establishment of a high quality database for the modelling of perforated liners, Proceedings of ASME Turbo Expo, pp.2010-22329, 2010.

I. Hughes and A. Dowling, The absorption of sound by perforated linings, Journal of Fluid Mechanics, vol.218, issue.1, pp.299-335, 1990.

J. Primus, E. Piot, and F. Simon, An adjoint-based method for liner impedance eduction: validation and numerical investigation, Journal of Sound and Vibration, vol.332, pp.58-75, 2013.

J. Primus, E. Piot, F. Simon, M. Jones, and W. Watson, ONERA-NASA Cooperative Effort on Liner Impedance Eduction, 19th AIAA/CEAS Aeroacoustics conference, pp.2013-2273, 2013.

S. Mendez and J. Eldredge, Acoustic modeling of perforated plates with bias flow for Large-Eddy Simulations, Journal of Computational Physics, vol.228, issue.13, pp.4757-4772, 2009.

A. Andreini, B. Facchini, L. Ferrari, G. Lenzi, F. Simonetti et al., Experimental investigation on effusion liner geometries for aero-engine combustors: evaluation of global acoustic parameters, ASME Turbo Expo, pp.2012-69853, 2012.

J. Florenciano-merino, Etude de la reponse d'un ecoulement avec transfert parietal de masse a un forage acoustique: application au refroidissment des chambres de combustion aeronautiques, 2013.

A. Scarpato, N. Tran, S. Ducruix, and T. Schuller, Modeling the damping properties of perforated screens traversed by a bias flow and backed by a cavity at low Strouhal number, Journal of Sound and Vibration, vol.331, issue.2, pp.276-290, 2012.

A. Scarpato, S. Ducruix, and T. Schuller, Optimal and off-design operations of acoustic dampers using perforated plates backed by a cavity, Journal of Sound and Vibration, vol.332, pp.4856-4875, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01863900

B. Cosic, D. Wassmer, S. Terhaar, and C. Paschereit, Acoustic response of Helmholtz dampers in the presence of hot grazing flow, Journal of Sound and Vibration, vol.335, pp.1-18, 2015.

A. Andreini, C. Bianchini, B. Facchini, I. Vitale, and F. Turrini, Numerical analysis of the acoustic and flow field associated with perforated liners with variable acoustic forcing, 19th AIAA/CEAS Aeroacoustics conference, pp.2013-2156, 2013.

E. Piot, F. Micheli, and F. Simon, LDA investigation of the acoustic field above a perforated liner with grazing and bias flow, 2009.

C. Heuwinkel, A. Fischer, I. Rohle, L. Enghardt, F. Bake et al., Characterization of a Perforated Liner by Acoustic and Optical Measurements, 16th AIAA/CEAS Aeroacoustics Conference

H. Parisot-dupuis, F. Simon, E. Piot, and F. Micheli, Non-intrusive planar velocity-based nearfield acoustic holography in moving fluid medium, vol.133, pp.4087-4097, 2013.

D. Tonon, Aeroacoustics of shear layers in internal flows: closed branches and wall perforations, 2011.

J. Canino and S. Heister, Contributions of orifice hydrodynamic instabilities to primary atomization, Atomization and Sprays, vol.19, issue.1, pp.91-102, 2009.

A. Lichtarowicz, R. Duggins, and E. Markland, Discharge coefficients for incompressible non-cavitating flow through long orifices, J. Mech. Eng. Sci, vol.7, issue.2, pp.210-219, 1965.

D. Maa, Potential of microperforated panel absorber, The Journal of the Acoustical Society of America, vol.104, issue.5, pp.2861-2866, 1998.

I. Crandall, Theory of Vibration System and Sound, 1926.

U. Ingard, On the theory and design of acoustic resonators, The Journal of the Acoustical Society of America, vol.25, issue.6, pp.1037-1061, 1953.

T. Melling, The acoustic impendance of perforates at medium and high sound pressure levels, Journal of Sound and Vibration, vol.29, issue.1, pp.1-65, 1973.

T. Luong, M. Howe, and R. Mcgowan, On the Rayleigh conductivity of a bias-flow aperture, Journal of fluids and structures, vol.21, issue.8, pp.769-778, 2005.

X. Jing and X. Sun, Effect of plate thickness on impedance of perforated plates with bias flow, AIAA journal, vol.38, issue.9, pp.1573-1578, 2000.

B. Tester, The optimization of modal sound attenuation in ducts, the absence of mean flow, vol.27, pp.477-513, 1973.

B. Tester, The propagation and attenuation of sound in lined ducts containing uniform or "plug" flow, vol.28, pp.151-203, 1973.

E. Gullaud, S. Mendez, C. Sensiau, F. Nicoud, and T. Poinsot, Effect of multiperforated plates on the acoustic modes in combustors, Comptes Rendus Mecanique, vol.337, issue.6, pp.406-414, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00803809

E. Gullaud and F. Nicoud, Effect of perforated plates on the acoustics of annular combustors, AIAA Journal, vol.50, issue.12, pp.2629-2642, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00800709