. Alvarez-munoz, Improving control of quadrotors carrying a manipulator arm
URL : https://hal.archives-ouvertes.fr/hal-01067104

G. Antonelli, CAVIS: a Control software Architecture for cooperative multi-unmanned aerial VehIcle-manipulator Systems. IFAC, vol.3, pp.1108-1113, 2014.

M. Aydemir, Disturbance Rejection Control of a Quadrotor Equipped with a 2 DOF Manipulator,Machine Vision and Mechatronics in Practice, pp.91-103, 2015.

S. B. Backus and A. M. Dollar, Design Optimization of a Prismatic-Revolute-Revolute Joint Hand for Grasping From Unconstrained Vehicles, 2017.

C. Bellicoso and . Dario, Design, modeling and control of a 5-DoF light-weight robot arm for aerial manipulation, Conference, IEEE 2015, pp.853-858

D. Boix and . Melia, Modelling and Control of Helicopter Robotic Landing Gear for Uneven Ground Conditions

K. Bouzgou, Geometric modeling and singularity of 6 dof fanuc 200ic robot, pp.208-214, 2014.

S. Cho, Development of a Visionenabled Aerial Manipulator using a Parallel Robot, transactions of the Japan society for aeronautical and space sciences, 2017.

S. Dai, Adaptive control of a quadrotor UAV transporting a cable-suspended load with unknown mass, 2014.

T. W. Danko, A parallel manipulator for mobile manipulating UAVs, (TePRA) Conference 2015 IEEE, pp.1-6

T. W. Danko and P. Y. Oh, Design and control of a hyper-redundant manipulator for mobile manipulating unmanned aerial vehicles, Journal of Intelligent & Robotic Systems, 2014.

. Escareno, Task-based control of a multirotor miniature aerial vehicle having an onboard manipulator, 2014.

M. Fumagalli, Developing an aerial manipulator prototype: Physical interaction with the environment, IEEE robotics & automation magazine, pp.41-50, 2014.

F. Huber, First analysis and experiments in aerial manipulation using fully actuated redundant robot arm, 2013.

. Jimenez-cano, Aerial manipulator with a compliant arm for bridge inspection, (ICUAS) Conference, 2017.

. Jimenez-cano, Control of an aerial robot with multi-link arm for assembly tasks, (ICRA) Conference, 2013.

B. Kamel, Dynamic modeling, simulation and PID controller of unmanned aerial vehicle UAV, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02169216

W. Khalil and E. Dombre, Modeling, identification and control of robots, 2004.

J. Kim, Preliminary control design on spherically-connected multiple-quadrotor manipulator system, 2015.

S. Kim, Aerial manipulation using a quadrotor with a two dof robotic arm, (IROS)l Conference, 2013.

K. Kondak, Closed-loop behavior of an autonomous helicopter equipped with a robotic arm for aerial manipulation tasks, International Journal of Advanced Robotic Systems, p.145, 2013.

C. Korpela, M. Orsag, M. Pekala, and P. Oh, Dynamic stability of a mobile manipulating unmanned aerial vehicle, (ICRA) Conference, 2013.

C. Liew and . Fui, Recent Developments in Aerial Robotics: An Survey and Prototypes Overview, Recent Developments in Aerial Robotics: An Survey and Prototypes Overview, 2017.

. Lipiello, Exploiting redundancy in cartesian impedance control of UAVs equipped with a robotic arm, RSJ, 2012.

V. Lippiello and F. Ruggiero, Cartesian impedance control of a UAV with a robotic arm, IFAC Proceedings Volumes, 2012.

M. Manubens, Robotics: Science and Systems, p.8, 2013.

. Marconi, Aerial service robotics: The AIRobots perspective, 2012.

D. Mellinger, Control of quadrotors for robust perching and landing, pp.205-225, 2010.

L. Mello and . Santos, Whole-body modeling and control of an unmanned aerial manipulator, 2015.

J. Mendoza-mendoza, Air-arm: A new kind of flying manipulator, 2015.

M. Orsag, Modeling and control of MM-UAV: Mobile manipulating unmanned aerial vehicle, Journal of Intelligent & Robotic Systems, pp.1-14, 2013.

F. Ruggiero, A multilayer control for multirotor UAVs equipped with a servo robot arm, 2015.

N. Staub, Towards Robotic MAGMaS: Multiple Aerial-Ground Manipulator Systems, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01476813

S. Varadaramanujan, Design of a Drone with a Robotic End-Effector

Y. , Bin and al, Modeling and control of rotor-flying multi-joint manipulator, IFAC Proceedings, 2014.

H. Yang and D. Lee, Hierarchical cooperative control framework of multiple quadrotormanipulator systems

J. Yeol and . Woong, Design and Analysis of a Multiple Tentacle System for Mobile Manipulation in Micro Aerial Vehicles, Procedia Computer Science, 2017.

Z. Zhou, Geometric modeling and control for the full-actuated aerial manipulating system, Conference (CCC), vol.2016

M. Srikanth and . Soto, Controlled manipulation with multiple quadrotors, AIAA Conf. on Guidance, Navigation and Control, 2011.

A. Y. Mersha, S. Stramigioli, and R. Carloni, Exploiting the dynamics of a robotic manipulator for control of UAVs,Robotics and Automation (ICRA), IEEE, 2014.

R. Spica, A. Franchi, and . Oriolo, Aerial grasping of a moving target with a quadrotor UAV,Intelligent Robots and Systems (IROS), 2012.

. Ieee/rsj, , 2012.

G. Heredia, Control of a multirotor outdoor aerial manipulator,Intelligent Robots and Systems, IEEE/RSJ International Conference on, 2014.

X. Ding, Trajectory linearization tracking control for dynamics of a multi-propeller and multifunction aerial robot-MMAR,Robotics and Automation (ICRA), IEEE International Conference on, 2011.

K. Bouzgou, Virtual reality simulation and singularity analysis of 3-RRR translational parallel robot, 2015.

Y. , Bin and He, Yuqing and al, Rotor-flying manipulator: modeling, analysis, Mathematical Problems in Engineering, 2014.

X. Ding, . Guo, . Pin, . Xu, . Kun et al., A Review of Aerial Manipulation of Small-scale Rotorcraft Unmanned Robotic Systems, Chinese Journal of Aeronautics, 2018.

F. Ruggiero, V. Lippiello, and A. Ollero, Aerial manipulation: A literature review, IEEE Robotics and Automation Letters, 2018.

. Suarez-alejandro, P. Soria, and . Ramon, Anthropomorphic, compliant and lightweight dual arm system for aerial manipulation, IROS, 2017.

H. Nguyen, A novel robotic platform for aerial manipulation using quadrotors as rotating thrust generators, IEEE Transactions on Robotics, 2018.

R. Jiao and W. Chou, Adaptive robust control of quadrotor with a 2-degree-of-freedom robotic arm, Advances in Mechanical Engineering, 2018.