O. Metko, An introduction to thermal spray, 2016.

P. Sigmund, Theory of sputtering. I. Sputtering yield of amorphous and polycrystalline targets, Phys. Rev, vol.184, pp.384-416, 1969.

W. M. Posadowski and Z. Radzimski, Sustained self-sputtering using a direct current magnetron source, J. Vac. Sci. Technol. A, vol.11, pp.2980-2984, 1993.

V. Kouznetsov, K. Macák, J. M. Schneider, U. Helmersson, and I. Petrov, A novel pulsed magnetron sputter technique utilizing very high target power densities, Surf. Coat. Technol, vol.122, pp.290-293, 1999.

A. Anders, A structure zone diagram including plasma-based deposition and ion etching, Thin Solid Films, vol.518, pp.4087-4090, 2010.

, Nuclear fuel claddings, production method thereof and uses of same against oxidation/hydriding, US Patent Application US20170287578A1, 2014.

J. Bischoff, C. Delafoy, C. Vauglin, P. Barberis, C. Roubeyrie et al., AREVA NP's enhanced accident-tolerant fuel developments: focus on Cr-coated M5 cladding, Nucl. Eng. Technol, vol.50, pp.223-228, 2018.

, Framatome: the next evolution of nuclear fuel website

J. Brachet, M. L. Saux, M. L. Flem, S. Urvoy, E. Rouesne et al., On-going studies at CEA on chromium coated zirconium based nuclear fuel claddings for enhanced accident tolerant LWRs fuel, Proceedings of TopFuel, pp.13-19, 2015.

A. Ferrec, Dépôt et caractérisation de métaux et de nitrures à base de chrome par pulvérisation magnétron pulsée (HiPIMS), 2013.

J. Brachet, M. L. Saux, V. Lezaud-chaillioux, M. Dumerval, Q. Houmaire et al., Behavior under LOCA conditions of enhanced accident tolerant chromium coated zircaloy-4 claddings, Proceedings of TopFuel, 2016.

M. Arab, F. Yazdi, J. Lomello, F. Wang, Z. Sanchette et al., Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering, Vacuum, vol.109, pp.43-51, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01105389

M. Loyer-prost, C. Cabet, M. Sall, A. Billard, P. H. Jouneau et al., Radiation tolerance of Cr-Ta multilayer coatings, Poster at the NuMat: Nuclear Materials Conference, 2016.

H. Rueß, M. Baben, S. Mráz, L. Shang, P. Polcik et al., HPPMS deposition from composite targets: effect of two orders of magnitude target power density changes on the composition sputtered Cr-Al-C thin films, Vacuum, vol.145, pp.285-289, 2017.

D. Eicher, A. Schlieter, C. Leyens, S. Shang, S. Shayestehaminzadeh et al., Solid particle erosion behavior of nanolamiated Cr2AlC films, pp.187-195, 2018.

M. Ougier, F. Lomello, F. Schuster, A. Michau, E. Monsifrot et al., Deposition and characterization of Cr-Al-C thin films for accidents tolerant zircalloy claddings, Poster at 16th International Conference on Plasma Surface Engineering, 2018.

K. S. Chang, K. T. Chen, C. Y. Hsu, and P. D. Hong, Growth (AlCrNbSiTiV)N thin films on the interrupted turning and properties using DCMS and HiPIMS system, Appl. Surf. Sci, vol.440, pp.1-7, 2018.

P. W. May, Diamond thin films: a 21st-century material, Philos. Trans. R. Soc. Lond. A, vol.358, pp.473-495, 2000.

M. Suzuki, Y. Tanaka, Y. Inoue, N. Myamoto, M. Sato et al., Uniformization of boron nitride coating thickness by continuous chemical vapor deposition process for interphase of sic/sic composites, J. Ceram. Soc. Jpn, vol.111, pp.865-871, 2003.

E. S. Polsen, D. Q. Mcnerny, B. Viswanath, S. W. Pattinson, and A. J. Hart, High-speed roll-to-roll manufacturing of graphene using a concentric tube CVD reactor, Sci. Rep, vol.5, p.10257, 2015.

R. E. Schropp, Industrialization of hot wire chemical vapor deposition for thin film applications, Thin Solid Films, vol.595, pp.272-283, 2015.

H. Mosebach, V. Hopfe, M. Erhard, and M. Meyer, Monitoring of SiC deposition in an industrial CVI/CVD reactor by in-situ FTIR spectroscopy, J. Phys. IV, Colloq. C, vol.5, issue.5, pp.97-104, 1995.
URL : https://hal.archives-ouvertes.fr/jpa-00253765

R. L. Ives, C. J. Oldham, J. S. Daubert, A. P. Gremaud, G. Collins et al., Corrosion mitigation coatings for rf sources and components, IEEE Trans. Electron Devices, pp.1-8, 2018.

F. Weiss, J. Lindner, J. Sénateur, C. Dubourdieu, and V. Galindo, Injection MOCVD: ferroelectric thin films and functional oxide superlattices, Surf. Coat. Technol, pp.191-197, 2000.

A. Douard, C. Bernard, and F. Maury, Thermodynamic simulation of atmospheric DLI-CVD processes for the growth of chromium based hard coatings using bis(benzene)chromium as molecular source, Surf. Coat. Technol, vol.203, pp.516-520, 2008.

F. Maury, A. Douard, S. Delclos, D. Samelor, and C. Tendero, Multilayer chromium based coatings grown by atmospheric pressure direct liquid injection CVD, Surf. Coat. Technol, vol.204, issue.6-7, pp.983-987, 2009.

A. Michau, F. Maury, F. Schuster, R. Boichot, and M. Pons, Evidence for a Cr metastable phase as a tracer in DLI-MOCVD chromium hard coatings usable in high temperature environment, Appl. Surf. Sci, vol.422, pp.198-206, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01666265

G. Boisselier, F. Maury, and F. Schuster, SiC coatings grown by liquid injection chemical vapor deposition using single source metalorganic precursors, Surf. Coat. Technol, vol.215, pp.152-160, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01218626

A. Michau, F. Maury, F. Schuster, R. Boichot, M. Pons et al., Chromium carbide growth at low temperature by a highly efficient DLI-MOCVD process in effluent recycling mode, Surf. Coat. Technol, vol.332, pp.96-104, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01677497

A. Michau, F. Maury, F. Schuster, I. Nuta, Y. Gazal et al., Chromium carbide growth by direct liquid injection chemical vapor deposition in long and narrow tubes, experiments, modeling and simulation, Coatings, vol.8, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01829650

E. C. Young, B. P. Yonkee, F. Wu, S. Ho, S. P. Oh et al., Hybrid tunnel junction contacts to III-nitride light-emitting diodes, Appl. Phys. Express, vol.9, p.22102, 2016.

M. Aoukar, P. D. Szkutnik, D. Jourde, B. Pelissier, P. Michallon et al., Control of carbon content in amorphous GeTe films deposited by plasma enhanced chemical vapor deposition (PE-MOCVD) for phase change memory applications, J. Phys. D, Appl. Phys, vol.48, p.265203, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01877850

S. K. Selvaraj, G. Jursich, and C. G. Takoudis, Design and implementation of a novel portable atomic layer deposition/chemical vapor deposition hybrid reactor, Rev. Sci. Instrum, vol.84, p.95109, 2013.

A. Michau, F. Maury, F. Schuster, F. Lomello, J. Brachet et al., High-temperature oxidation resistance of chromium-based coatings deposited by DLI-MOCVD for enhanced protection of the inner surface of long tubes, Surf. Coat. Technol, vol.349, pp.1048-1057, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02051246

P. Fauchais, G. Montavon, R. S. Lima, and B. R. Marple, Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions, J. Phys. D, Appl. Phys, vol.44, p.93001, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00629983

A. Killinger, R. Gadow, G. Mauer, A. Guignard, R. Vaßen et al., Review of new developments in suspension and solution precursor thermal spray processes, J. Therm. Spray Technol, pp.20677-20695, 2011.

N. Markocsan, M. Gupta, S. Joshi, P. Nylén, X. Li et al., Liquid feedstock plasma spraying: an emerging process for advanced thermal barrier coatings, J. Therm. Spray Technol, vol.26, pp.1104-1114, 2017.

P. Fauchais, J. Heberlein, and M. Boulos, Thermal Spray Fundamentals: From Powder to Part, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00946557

E. Irissou, J. Legoux, A. Ryabinin, B. Jodoin, and C. Moreau, Review on cold spray process and technology: part I. Intellectual property, J. Therm. Spray Technol, vol.17, issue.4, pp.495-516, 2008.

P. Cavaliere, Cold-Spray Coatings, 2018.

M. R. Rokni, S. R. Nutt, C. A. Widener, V. K. Champagne, and R. H. Hrabe, Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray, Therm. Spray Technol, vol.26, pp.1308-1355, 2017.

E. J. Lugsheider, High kinetic process developments in thermal spray technology, Therm. Spray Technol, vol.15, issue.2, pp.155-156, 2006.

S. Bagherifard, S. Monti, M. V. Zuccoli, M. Riccio, J. Kondás et al., Evaluating the potential of cold spray deposition for additive manufacturing of freeform structural components, Materials Science & Engineering A

R. Comesaña, R. Lusquinos, J. Val, T. Malot, M. Lopez-alavrez et al., Calcium phosphate grafts produced by rapid prototyping based on laser cladding, J. Eur. Ceram. Soc, vol.31, issue.1-2, pp.29-41, 2011.

P. Aubry, C. Blanc, I. Demirci, M. Dal, and H. Maskrot, Laser cladding and wear testing of nickel base hardfacing materials: influence of process parameters, J. Laser Appl, vol.29, p.22504, 2017.

C. Navas, R. Colaço, J. Damborenea, and R. Vilar, Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings, Surf. Coat. Technol, vol.200, issue.24, pp.6854-6862, 2006.

, Photonics applied: materials processing: laser additive manufacturing gains strength, 2009.

P. Peyre, P. Aubry, C. Braham, and R. Fabbro, Results on laser direct manufacturing of graded materials, Proc. of ICALEO2006, Laser Materials Processing Conference, pp.127-132, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00312624