P. Boisse, Advances in composites manufacturing and Process Design, Woodhead Publishing Series in Composites Science and Engineering: Number, vol.56, 2015.

S. Allaoui, C. Cellard, and G. Hivet, Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms, Composites: Part A, vol.68, pp.336-381, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01213267

P. Boisse, N. Hamila, E. Guzman-maldonad, A. Madeo, A. Madeo et al., The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review, Int J Mater Form, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01313827

C. Tephany, D. Soulat, J. Gillibert, and P. Ouagne, Influence of the non-linearity of fabric tensile behavior for preforming modeling of a woven flax fabric, Text Res J, vol.86, issue.6, pp.604-621, 2016.

P. Harrison, Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh, Composites: Part A, vol.81, pp.145-57, 2016.

T. Gereke, O. Dobrich, M. Hubner, and C. Cherif, Experimental and computational composite textile reinforcement forming: a review, Composites: Part A, vol.46, pp.1-10, 2013.

P. Boisse, N. Hamila, and A. Madeo, Analysis of defect developments in composite forming, The structural integrity of carbon fiber composites, 2017.

A. Charmetant, J. G. Orliac, E. Vidal-sallé, and P. Boisse, Hyperelastic model for large Fig. 14. Zoomed side photo at the holder corner for plies in 0°and 45°orientations with corner radiuses 6 and 12 mm. Misalignment of the white dots illustrates the yarn relative sliding. deformation analyses of 3D interlock composite preforms, Compos Sci Technol, vol.72, issue.12, pp.1352-60, 2012.

P. Boisse, Finite element analysis of composite forming, Composite forming technologies, pp.46-79, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00381253

N. Hamila, P. Boisse, F. Sabourin, and M. Brunet, A semi-discrete shell finite element for textile composite reinforcement forming simulation, Int J Numer Meth Eng, vol.79, issue.12, pp.1443-66, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00515898

J. Sjölander, P. Hallander, and M. ?kermo, Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms, Composites: Part A, vol.81, pp.41-51, 2016.

S. Allaoui, P. Boisse, S. Chatel, N. Hamila, G. Hivet et al., Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape, Composites: Part A, vol.42, issue.6, pp.612-634, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00601863

S. Allaoui, G. Hivet, D. Soulat, A. Wendling, P. Ouagne et al., Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement, Int J Mater Form, vol.7, issue.2, pp.155-65, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00773212

F. Nezami, . Nosrat, T. Gereke, and C. Cherif, Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications, Composites: Part A, vol.84, pp.406-422, 2016.

S. Chen, A. Endruweit, L. T. Harper, and N. A. Warrior, Inter-ply stitching optimisation of highly drapeable multi-ply preforms, Composites: Part A, vol.71, pp.144-56, 2015.

P. Wang, X. Legrand, P. Boisse, N. Hamila, and D. Soulat, Experimental and numerical analyses of manufacturing process of a composite square box part: comparison between textile reinforcement forming and surface 3D weaving, Composites Part B, vol.78, pp.26-34, 2015.

F. Nezami, . Nosrat, T. Gereke, and C. Cherif, Active forming manipulation of composite reinforcements for the suppression of forming defects, Composites: Part A, vol.99, pp.94-101, 2017.

P. Ouagne, D. Soulat, G. Hivet, S. Allaoui, and D. Duriatti, Analysis of defects during the preforming of a woven flax, Adv Compos Lett, vol.20, pp.105-113, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00655528

P. Ouagne, D. Soulat, J. Moothoo, E. Capelle, and S. Gueret, Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignement defect, Composites: Part A, vol.51, pp.1-10, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00838131

P. Ouagne, D. Soulat, C. Tephany, and J. Gillibert, Measurement of the appearance and growth of tow buckling defect in the frame of complex shape manufacturing process by using fringe projection technique, Strain, vol.52, issue.6, pp.559-69, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02135763

E. Capelle, P. Ouagne, D. Soulat, and D. Duriatti, Complex shape forming of flax woven fabrics: design of specific blank-holder shapes to prevent defects, Composites: Part B, vol.62, pp.29-36, 2014.

J. Walther, P. Simacek, and S. G. Advani, The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites, Int J Mater Form, vol.5, pp.83-97, 2012.

N. Vernet, E. Ruiz, and S. Advani, Experimental determination of the permeability of engineering textiles: benchmark II, Composites: Part A, vol.61, pp.172-84, 2014.

S. Gatouillat, A. Bareggi, E. Vidal-sallé, and P. Boisse, Meso modelling for composite preform shaping simulation of the loss of cohesion of the woven fibre network, Composites: PartA, vol.54, pp.135-179, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00934559

F. Nosrat-nezami, T. Gereke, C. Eberdt, and C. Cherif, Characterisation of the sheartension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes, Composites: Part A, vol.67, pp.131-140, 2014.

J. Cao, R. Akkerman, P. Boisse, and J. Chen, Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results, Composites: Part A, vol.39, pp.1037-53, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01658046

F. Härtel and P. Harrison, Evaluation of normalisation methods for uniaxial bias-extension tests, Composites: Part A, vol.67, pp.61-70, 2014.

G. Barbagallo, A. Madeo, G. I. Morestin, F. Boisse, and P. , Bias extension test on an unbalanced woven composite reinforcement: experiments and modeling via a second-gradient continuum approach, J Compos Mater, vol.51, issue.2, pp.153-70, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01719681

A. Margossian, S. Bel, J. M. Balvers, D. Leutz, R. Freitas et al., Finite element forming simulation of locally stitched non-crimp fabrics, Composites: Part A, vol.61, pp.152-62, 2014.

F. Schirmaier, K. A. Weidenmann, L. Kaerger, and F. Henning, Characterization of the draping behaviour of sewed unidirectional non-crimp fabrics (UD-NCF), Composites: Part A, vol.80, pp.28-38, 2016.

P. B. Jacquot, P. Wang, D. Soulat, and X. Legrand, Analysis of the preforming behaviour of the braided and woven flax/polyamide fabrics, J Ind Text, vol.46, issue.3, pp.698-718, 2016.

W. Stephen, The mechanics of friction in rope rescue, International technical rescue symposium

M. A. Khan, T. Mabrouki, E. Vidal-sallé, and P. Boisse, Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark, J Mater Proc Technol, vol.210, pp.378-88, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00505131