Experimental and numerical investigations of a thermoplastic composite (carbon/PPS) thermoforming. Struct Control Health Monit, vol.18, pp.769-80, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00812689
Numerical investigation to evaluate effect of fiber orientation on penetration-resistance of an aircraft composite material, Mech Adv Mater Struct, vol.2018, pp.1-9 ,
Surface quality and shrinkage of the composite bus housing panel manufactured by RTM, Compos Struct, vol.57, issue.1, pp.211-231, 2002. ,
Study on high-speed RTM to reduce the impregnation time of carbon/ epoxy composites, Compos Struct, vol.119, pp.50-58, 2015. ,
Influence of process and material parameters on impact response in composite structure: methodology using design of experiments, Key Eng Mater, vol.446, pp.83-90, 2010. ,
La mesure des déformations pour l'étude du comportement et la mise en forme des renforts de composites, p.18 ,
, Congrès Français de Mécanique, 2007.
Experimental device for the preforming step of the RTM process, Int J Mater Form, vol.2, issue.1, pp.181-185, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00636986
Finite element simulations of textile composite forming including the biaxial fabric behaviour, Compos B Eng, vol.28, issue.4, pp.453-64, 1997. ,
Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming, Int J Mater Form, vol.3, issue.2, pp.1229-1269, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00502248
Simulation de la mise en forme des renforts composites mono et multi plis, 2007. ,
Algorithms for draping fabrics on doubly-curved surfaces, Int J Numer Meth Eng, vol.31, issue.7, pp.1415-1441, 1991. ,
Modelling of composite sheet forming: a review, Compos A: Appl Sci Manuf, vol.33, issue.4, pp.515-552, 2002. ,
A meso-macro three node finite element for draping of textile composite preforms, Appl Compos Mater, vol.14, issue.4, pp.235-50, 2007. ,
URL : https://hal.archives-ouvertes.fr/hal-00380796
Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration, Compos A Appl Sci Manuf, vol.40, issue.4, pp.530-539, 2009. ,
Processing of composites: simulations of the draping of fabrics with updated material behaviour law, J Compos Mater, vol.35, issue.2, pp.138-63, 2001. ,
Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements, Exp Mech, vol.41, issue.3, pp.260-269, 2001. ,
A non-orthogonal constitutive model for characterizing woven composites, Compos A, vol.34, pp.183-93, 2003. ,
Hypo-elasticity and elasticity, Arch Ration Mech Anal, vol.6, issue.1, pp.89-104, 1960. ,
Finite element analyses of knitted composite reinforcement at large strain. Revue Européenne des Éléments Finis, vol.14, pp.767-76, 2005. ,
Simulation of 3D interlock composite preforming, Compos Struct, vol.88, issue.4, pp.615-638, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00391623
Nonlinear Finite Elements for Continua and Structures, 2013. ,
A parametric sensitivity study on preforming simulations of woven composites using a hypoelastic computational model, J Reinf Plast Compos, vol.35, issue.3, pp.243-57, 2015. ,
Large deformation simulation of anisotropic material using an updated Lagrangian finite element method, Comput Meth Appl Mech Eng, vol.196, pp.3141-50, 2007. ,
A hyperelastic approach for composite reinforcement large deformation analysis, J Compos Mater, vol.44, issue.1, pp.5-26, 2009. ,
Analysis of long fibers direction of transversely isotropic hyperelastic material for thermoforming application, J Reinf Plast Compos, issue.9, p.24, 2005. ,
A macroscopic material model for woven fabrics based on mesoscopic sawtooth unit cell, Compos Struct, vol.180, pp.531-572, 2017. ,
Mechanics of plain-woven fabrics for inflated structures, Compos Struct, vol.61, issue.4, pp.375-93, 2003. ,
Finite element model for the simulation of preimpregnated woven fabric by deep-drawing and laying-up processes, J Adv Mater, vol.29, issue.4, pp.42-53, 2000. ,
Finite element analysis of textile composite preform stamping, Compos Struct, vol.52, issue.3, pp.483-97, 2001. ,
Discrete models of fabric accounting for yarn interactions: simulations of uniaxial and biaxial behaviour, Revue Européenne des Eléments, vol.14, issue.6-7, pp.653-75, 2005. ,
A simplified finite element model for draping of woven material, Compos A Appl Sci Manuf, vol.35, issue.6, pp.637-680, 2004. ,
Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming, Int J Mater Form, vol.3, issue.2, pp.1205-1221, 2010. ,
A simple discrete method for the simulation of the preforming of woven fabric reinforcement, Key Eng Mater, pp.213-218, 2012. ,
Rate dependent modelling of the forming behaviour of viscous textile composites, Compos A Appl Sci Manuf, vol.42, issue.11, pp.1719-2172, 2011. ,
Prédiction par simulation des défauts de plissement lors de la mise en forme des matériaux composites mono et multiplis, Matériaux & Techniques, vol.100, issue.6-7, pp.591-600, 2012. ,
Hexflow® 48600 C 1300, Fiche technique2015 ,
Analyses of woven hemp fabric characteristics for composite reinforcement, Mater Des, vol.66, pp.82-92, 2015. ,
Numerical and experimental investigations on deep drawing of G1151 carbon fiber woven composites, Appl Compos Mater, vol.23, issue.3, pp.461-76, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01361888
Development of a non-orthogonal macroscale material model for advanced woven fabrics based on mesoscale structure, Compos B Eng, vol.110, pp.497-510, 2017. ,
The biasextension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review, Int J Mater Form, vol.10, issue.4, pp.473-92, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01313827
Damage investigation in CFRP composites usingfull-field measurement techniques: combination of digitalimage stereo-correlation, infrared thermography andX-ray tomography, Compos B Eng, vol.48, pp.95-105, 2013. ,
Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Compos Sci Technol, vol.64, issue.10, pp.1453-65, 2004. ,
Meso-modelling of non-crimp fabric composites for coupled drape and failure analysis, J Mater Sci, vol.41, issue.20, pp.6725-6761, 2006. ,
Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results, Appl Sci Manuf Compos A, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-01658046
Expérimentations et modèles de comportement de renforts de composites tissés, 2003. ,
Experimental study and finite element simulation of a glass fiber fabric shaping process, Polym Compos, vol.16, issue.1, pp.83-95, 1995. ,
Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis, Int J Numer Meth Eng, vol.15, issue.12, pp.1862-1869, 1980. ,
Simulation du comportement mécanique des milieux fibreux en grandes transformations: application aux renforts tricotés, 2004. ,
Development of a Ballistic Hybrid Fabric Model for Aeroengine fan Blade Containment Application, 2012. ,
Numerical and experimental forming analyses of textile composite re, 2009. ,
Appl Sci Manuf Compos A 2018. manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics, J Mater Process Technol, vol.118, issue.1, pp.460-71, 2001. ,