, grain boundaries in hastelloy x, Journal of the Mechanics and Physics of Solids, vol.60, pp.1201-1220

A. Arcari, R. D. Vita, and N. E. Dowling, Mean stress relaxation during cyclic straining of high strength aluminum alloys, International Journal of Fatigue, vol.31, pp.1742-1750, 2009.

F. Azzouz, G. Cailletaud, J. L. Chaboche, E. Ostoja-kuczynski, and S. Quilici, Cyclic calculations and life estimation in thermomechanical fatigue, 9th International conference on multiaxial fatigue and fracture, pp.785-793, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00905549

F. Barbe, S. Forest, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results, International Journal of Plasticity, vol.17, pp.537-563, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02327393

J. Besson, G. Cailletaud, J. L. Chaboche, S. Forest, and M. Blétry, Non-Linear Mechanics of Materials. Solid Mechanics and Its Applications, vol.167, 2009.

M. Bouchedjra, T. Kanit, C. Boulemia, A. Amrouche, and M. E. Belouchrani, Determination of the RVE size for 575 polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria, European Journal of Mechanics -A/Solids, vol.72, pp.1-15, 2018.

E. P. Busso and G. Cailletaud, On the selection of active slip systems in crystal plasticity, International Journal of Plasticity, vol.21, pp.2212-2231, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00154559

J. Chaboche, Time-independent constitutive theories for cyclic plasticity, International Journal of Plasticity, vol.2, pp.149-580, 1986.

J. Chaboche, Constitutive equations for cyclic plasticity and cyclic viscoplasticity, International Journal of Plasticity, vol.5, pp.247-302, 1989.

J. L. Chaboche, P. Kanout, and F. Azzouz, Cyclic inelastic constitutive equations and their impact on the fatigue life predictions, International Journal of Plasticity, vol.35, pp.44-66, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00714264

Y. Choi, M. Groeber, T. Turner, D. Dimiduk, C. Woodward et al., A crystal-plasticity FEM study on effects of simplified grain representation and mesh types on mesoscopic plasticity heterogeneities, Materials Science and Engineering: A, vol.553, pp.37-44, 2012.

D. Colas, E. Finot, S. Flouriot, S. Forest, M. Mazière et al., Local ratcheting phenomena in the cyclic behavior of polycrystalline tantalum, JOM Journal of the Minerals, Metals & Materials Society . and computational homogenization. International Journal of Solids and Structures, vol.122, pp.148-161, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02266594

A. Cruzado, M. Urchegui, and X. Gómez, Finite element modeling and experimental validation of fretting wear scars in thin steel wires, Wear, vol.289, pp.26-38, 2012.

D. Das and P. Chakraborti, Effect of stress parameters on ratcheting deformation stages of polycrystalline ofhc copper, 2011.

, Fatigue & Fracture of Engineering Materials & Structures, vol.34, pp.734-742

F. Di-gioacchino and J. Quinta-da-fonseca, Plastic strain mapping with sub-micron resolution using digital image correlation, Experimental Mechanics, vol.53, pp.743-754, 2013.

R. Dingreville, C. C. Battaile, L. N. Brewer, E. A. Holm, and B. L. Boyce, The effect of microstructural representation on simulations of microplastic ratcheting, International Journal of Plasticity, vol.26, pp.617-633, 2010.

F. Dunne, A. Wilkinson, and R. Allen, Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal, International Journal of Plasticity, vol.23, pp.273-295, 2007.

S. Forest and M. Rubin, A rate-independent crystal plasticity model with a smooth elasticplastic transition and no slip indeterminacy, European Journal of Mechanics -A/Solids, vol.55, pp.278-288, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01251477

D. Fournier and A. Pineau, Low cycle fatigue behavior of Inconel 718 at 298 K and 823 K, Metallurgical Transactions A, vol.605, issue.8, pp.1095-1105, 1977.

C. Frederick and P. Armstrong, A mathematical representation of the multiaxial Bauschinger effect, Materials at High Temperatures, vol.24, pp.1-26, 2007.

S. Ghorbanpour, M. Zecevic, A. Kumar, M. Jahedi, J. Bicknell et al., A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and 610 cyclic deformation of Inconel 718, International Journal of Plasticity, vol.99, pp.162-185, 2017.

A. Goodman, Development of constitutive equations for computer analysis of stainless steel components, Nuclear engineering and design, vol.83, pp.349-354, 1984.

S. Gribbin, J. Bicknell, L. Jorgensen, I. Tsukrov, and M. Knezevic, Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718, International Journal of Fatigue, vol.93, pp.156-167, 2016.

Y. Guilhem, S. Basseville, F. Curtit, J. M. Stéphan, and G. Cailletaud, Numerical analysis of the effect of surface roughness on mechanical fields in polycrystalline aggregates, Modelling and Simulation in Materials Science and Engineering, vol.26, p.45004, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01719022

H. Hao, D. Ye, Y. Chen, M. Feng, and J. Liu, A study on the mean stress relaxation behavior of 2124-T851 aluminum alloy during low-cycle fatigue at different strain ratios, Materials & Design, vol.67, pp.272-279, 2015.

T. Hassan and S. Kyriakides, Ratcheting of cyclically hardening and softening materials: I. uniaxial behavior. International 620, Journal of Plasticity, vol.10, pp.149-184, 1994.

T. Hassan and S. Kyriakides, Ratcheting of cyclically hardening and softening materials: II. multiaxial behavior, International Journal of Plasticity, vol.10, pp.185-212, 1994.

C. Hennessey, G. M. Castelluccio, and D. L. Mcdowell, Sensitivity of polycrystal plasticity to slip system kinematic hardening laws for Al 7075-T6, Materials Science and Engineering: A, vol.687, pp.241-248, 2017.

Y. Jiang and H. Sehitoglu, Multiaxial cyclic ratcheting under multiple step loading, International Journal of Plasticity, vol.10, pp.849-870, 1994.

D. S. Joseph, P. Chakraborty, and S. Ghosh, Wavelet transformation based multi-time scaling method for crystal plasticity fe simulations under cyclic loading, Computer Methods in Applied Mechanics and Engineering, vol.199, pp.2177-2194, 2010.

A. D. Kammers and S. Daly, Digital image correlation under scanning electron microscopy: Methodology and validation, p.630, 2013.

, Experimental Mechanics, vol.53, pp.1743-1761

G. Kang, Y. Dong, H. Wang, Y. Liu, and X. Cheng, Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation, Materials Science and Engineering: A, vol.527, pp.5952-5961, 2010.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, pp.3647-3679, 2003.

T. Kanit, F. Nguyen, S. Forest, D. Jeulin, M. Reed et al., Apparent and effective physical properties of heterogeneous materials: representativity of samples of two materials from food industry, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.3960-3982, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00139164

S. Krishna, T. Hassan, I. B. Naceur, K. Sai, and G. Cailletaud, Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304, International Journal of Plasticity, vol.640, issue.25, pp.1910-1949, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00424035

S. B. Lee, R. Lebensohn, and A. Rollett, Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms, International Journal of Plasticity, vol.27, pp.707-727, 2011.

C. B. Lim, K. Kim, and J. Seong, Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress, International Journal of Fatigue, vol.31, pp.501-507, 2009.

J. Lu, A. Becker, W. Sun, and D. Tanner, Simulation of cyclic plastic behavior of 304L steel using the crystal plasticity finite element method, Procedia Materials Science, vol.3, pp.135-140, 2014.

C. Mary and S. Fouvry, Numerical prediction of fretting contact durability using energy wear approach: Optimisation of finite-element model, Wear, vol.263, pp.444-450, 2007.

L. Méric and G. Cailletaud, Single crystal modeling for structural calculations. Part 2: finite element implementation, J, vol.650, 1991.

. Eng and . Mater,

L. Méric, P. Poubanne, and G. Cailletaud, Single crystal modeling for structural calculations. Part 1 -model presentation, J. Eng. Mater. Technol, vol.113, 1991.

I. Nikulin, F. Yoshinaka, and T. Sawaguchi, Superior fatigue life of Fe-15Mn-10Cr-8Ni-4Si seismic damping alloy under asymmetric cyclic loading with tensile mean strain, Materials Science and Engineering: A, vol.748, pp.371-378, 2019.

, part I: Strain-controlled ratchetting experiments and simulations, International Journal of Plasticity, vol.14, pp.355-372

N. Ohno and J. D. Wang, Kinematic hardening rules with critical state of dynamic recovery, part II: application to experiments of ratcheting behavior, International Journal of Plasticity, vol.9, pp.391-403, 1993.

N. Osipov, A. F. Gourgues-lorenzon, B. Marini, V. Mounoury, F. Nguyen et al., FE modelling of bainitic 660 steels using crystal plasticity, Philosophical Magazine, vol.88, pp.3757-3777, 2008.

S. J. Park, K. S. Kim, and H. S. Kim, Ratcheting behaviour and mean stress considerations in uniaxial low-cycle fatigue of Inconel 718 at 649 ? C. Fatigue & Fracture of Engineering Materials & Structures, vol.30, pp.1076-1083, 2007.

A. L. Pécheur, F. Curtit, M. Clavel, J. Stephan, C. Rey et al., Polycrystal modelling of fatigue: Pre-hardening and surface roughness effects on damage initiation for 304L stainless steel, International Journal of Fatigue, vol.45, pp.48-60, 2012.

A. Pellissier-tanon, J. Bernard, C. Amzallag, and P. Rabbe, Evaluation of the resistance of type 316 stainless steel against progressive deformation, in: Low-Cycle Fatigue and Life Prediction, pp.69-80, 1982.

L. Portier, S. Calloch, D. Marquis, and P. Geyer, Ratchetting under tensiontorsion loadings: experiments and modelling, International Journal of Plasticity, vol.16, pp.303-335, 2000.

V. Prithivirajan and M. D. Sangid, The role of defects and critical pore size analysis in the fatigue response of additively 670 manufactured IN718 via crystal plasticity, Materials & Design, vol.150, pp.139-153, 2018.

A. Rovinelli, M. D. Sangid, H. Proudhon, and W. Ludwig, Using machine learning and a data-driven approach to identify the small fatigue crack driving force in polycrystalline materials, Computational Materials, vol.4, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01869114

C. Rycroft, Voro++: a three-dimensional voronoi cell library in C++, 2009.

K. Sai and G. Cailletaud, Multi-mechanism models for the description of ratchetting: Effect of the scale transition rule and 675 of the coupling between hardening variables, International Journal of Plasticity, vol.23, pp.1589-1617, 2007.

J. Schwartz, O. Fandeur, and C. Rey, Numerical approach of cyclic behaviour of 316LN stainless steel based on a polycrystal modelling including strain gradients, International Journal of Fatigue, vol.55, pp.202-212, 2013.

M. Shenoy, Y. Tjiptowidjojo, and D. Mcdowell, Microstructure-sensitive modeling of polycrystalline IN 100, International Journal of Plasticity, vol.24, pp.1694-1730, 2008.

M. Shenoy, J. Zhang, and D. Mcdowell, Estimating fatigue sensitivity to polycrystalline Ni-base superalloy microstructures using a computational approach, Fatigue & Fracture of Engineering Materials & Structures, vol.30, pp.889-904, 2007.

S. Sinha and S. Ghosh, Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments, International Journal of Fatigue, vol.28, pp.1690-1704, 2006.

F. Siska, S. Forest, and P. Gumbsch, Simulations of stressstrain heterogeneities in copper thin films: Texture and substrate 685 effects, Computational Materials Science, vol.39, pp.137-141, 2007.

B. Smith, D. Shih, and D. Mcdowell, Cyclic plasticity experiments and polycrystal plasticity modeling of three distinct Ti alloy microstructures, International Journal of Plasticity, vol.101, pp.1-23, 2018.

C. A. Stein, A. Cerrone, T. Ozturk, S. Lee, P. Kenesei et al., Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy. Current 690 Opinion in Solid State and, Materials Science, vol.18, pp.244-252, 2014.

J. Stinville, M. Echlin, D. Texier, F. Bridier, P. Bocher et al., Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation, Experimental Mechanics, vol.56, pp.197-216, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01644841

L. Taleb and C. Keller, Experimental contribution for better understanding of ratcheting in 304L SS, International Journal of Mechanical Sciences, pp.527-535, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01766036

J. L. Walley, R. Wheeler, M. D. Uchic, and M. J. Mills, In-situ mechanical testing for characterizing strain localization during deformation at elevated temperatures, Experimental Mechanics, vol.52, pp.405-416, 2012.

T. Wehner and A. Fatemi, Effects of mean stress on fatigue behaviour of a hardened carbon steel, International Journal of 700 Fatigue, vol.13, pp.241-248, 1991.

C. L. Xie, S. Ghosh, and M. Groeber, Modeling cyclic deformation of HSLA steels using crystal plasticity, Journal of Engineering Materials and Technology, vol.126, p.4, 2004.

C. Yu, G. Kang, Q. Kan, and D. Song, A micromechanical constitutive model based on crystal plasticity for thermomechanical cyclic deformation of NiTi shape memory alloys, International Journal of Plasticity, vol.44, pp.161-191, 2013.

Z. Package, Non-linear material & structure analysis suite, 2013.

N. Zaafarani, D. Raabe, R. Singh, F. Roters, and S. Zaefferer, Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations, Acta Materialia, vol.54, pp.1863-1876, 2006.

M. Zecevic and M. Knezevic, Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable 710 the prediction of anisotropy of aa6022-t4 sheets, International Journal of Plasticity, vol.105, pp.141-163, 2018.

M. Zecevic, Y. P. Korkolis, T. Kuwabara, and M. Knezevic, Dual-phase steel sheets under cyclic tensioncompression to large strains: Experiments and crystal plasticity modeling, Journal of the Mechanics and Physics of Solids, vol.96, pp.65-87, 2016.

H. Zhang, M. Diehl, F. Roters, and D. Raabe, A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations, International Journal of Plasticity, vol.80, pp.111-138, 2016.

K. S. Zhang, J. W. Ju, Z. Li, Y. L. Bai, and W. Brocks, Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity, Mechanics of Materials, vol.85, pp.16-37, 2015.

M. Zhang, J. Zhang, and D. Mcdowell, Microstructure-based crystal plasticity modeling of cyclic deformation of Ti6Al4V, International Journal of Plasticity, vol.23, pp.1328-1348, 2007.

Z. Zhao, M. Ramesh, D. Raabe, A. Cuitintilde=o, and R. Radovitzky, Investigation of three-dimensional aspects of 720 grain-scale plastic surface deformation of an aluminum oligocrystal, International Journal of Plasticity, vol.24, pp.2278-2297, 2008.

Z. Zhao, M. Ramesh, D. Raabe, A. Cuitio, and R. Radovitzky, Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal, International Journal of Plasticity, vol.24, pp.2278-2297, 2008.