J. R. Scheffe, A. Frances, D. M. King, X. Liang, B. A. Branch et al., Atomic layer deposition of iron (III) oxide on zirconia nanoparticles in a fluidized bed reactor using ferrocene and oxygen, Thin Solid Films, vol.517, pp.1874-1879, 2009.

R. Naumann-d'alnoncourt, M. Becker, J. Sekulic, R. A. Fisher, and M. Muhler, The preparation of Cu/Al 2 O 3 catalysts via CVD in a fluidized-bed reactor, Surf. Coat. Technol, vol.201, pp.9035-9039, 2007.

G. S. Czok and J. Werther, Liquid spray vs. gaseous precursor injection -its influence on the performance of particle coating by CVD in the fluidized bed, Powder Technol, vol.162, pp.100-110, 2006.

S. Balaji, J. Du, C. M. White, and B. E. Ydstie, Multi-scale modeling and control of fluidized beds for the production of solar grade silicon, Powder Technol, vol.199, pp.23-31, 2010.

J. Perez-mariano, K. H. Lau, E. Alvarez, R. Malhotra, and M. Hornbostel, Multilayer coatings for corrosion protection of coal gasifier components, Mater. Chem. Phys, vol.112, pp.180-185, 2008.

C. Vahlas, B. Caussat, . Ph, G. N. Serp, and . Angelopoulos, Principles and applications of CVD powder technology, Mater. Sci. Eng. R, vol.53, pp.1-72, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00476974

C. Pflitsch, A. Muhsin, U. Bergmann, and B. Atakan, Growth of thin aluminium oxide films on stainless steel by MOCVD at ambient pressure and using a hot-wall CVD-setup, Surf. Coat. Technol, vol.201, pp.73-81, 2006.

N. Bahlawane, S. Blittersdorf, K. Kohse-höinghaus, B. Atakan, and J. Müller, Investigation of CVD processes to perform dense a-alumina coating on superalloys, J. Electrochem. Soc, vol.151, pp.182-186, 2004.

J. E. Sundgren and H. T. Hentzell, A review of the present state of art in hard coatings grown from the vapor phase, J. Vac. Sci. Technol. A, vol.4, pp.2259-2280, 1986.

S. Canovic, B. Ljungberg, and M. Halvarsson, CVD TiC/alumina multilayer coatings grown on sapphire single crystals, Micron, vol.42, pp.808-818, 2011.

M. P. Singh and S. A. Shivashankar, Low pressure MOCVD of Al 2 O 3 films using aluminium acetylacetonate as precursor: nucleation and growth, Surf. Coat. Technol, vol.161, pp.135-143, 2002.

R. Teghil, D. Ferro, L. Bencivenni, and M. Pelino, A thermodynamic study of the sublimation processes of aluminium and copper acetylacetonates, Thermochim. Acta, vol.44, pp.213-222, 1981.

A. Siddiqi, R. A. Siddiqi, and B. Atakan, Thermal stability, sublimation pressures and diffusion coefficients of some metal acetylacetonates, Surf. Coat. Technol, vol.201, pp.9055-9059, 2007.

A. Devi, S. A. Shivashankar, and A. G. Samuelson, MOCVD of aluminium oxide films using aluminium b-diketonates as precursors, J. Phys. IV, vol.12, pp.139-146, 2002.

T. Maruyama and S. Arai, Aluminium oxide thin films prepared by chemical vapor deposition from aluminium acetylacetonate, Appl. Phys. Lett, vol.60, pp.322-323, 1992.

J. S. Kim, H. A. Marzouk, P. J. Reucroft, J. D. Robertson, and C. E. Hamrin, Fabrication of aluminium oxide thin films by a low pressure metal organic chemical vapor deposition technique, Appl. Phys. Lett, vol.61, pp.681-683, 1993.

C. Pflitsch, D. Viefhaus, U. Bergmann, and B. Atakan, Organometallic vapour deposition of crystalline aluminium oxide films on stainless steel substrates, Thin Solid Films, vol.515, pp.3653-3660, 2007.

J. Von-hoene, R. G. Charles, and W. M. Hickam, Thermal decomposition of metal acetylacetonates: mass spectrometer studies, J. Phys. Chem, vol.62, pp.1098-1201, 1958.

V. G. Minkina, Study of the pyrolysis kinetics of aluminium acetylacetonate in the gaseous phase, Inorg. Mater, vol.29, pp.1400-1401, 1993.

M. C. Rhoten and T. C. Devore, Evolved gas phase analysis investigation in the reaction between Tris(2,4-pentanedionato)aluminium and water vapour in chemical vapor deposition processes to produce alumina, Chem. Mater, vol.9, pp.1757-1764, 1997.

G. F. Johnson and P. W. Schilke, Alumina coated silicon carbide abrasive, US patent 4, vol.249, p.913, 1981.

X. Liang, L. F. Hakim, G. D. Zhan, J. A. Mc-cormick, S. M. George et al., Novel processing to produce polymer/ceramic composites by atomic layer deposition, J. Am. Ceram. Soc, vol.90, pp.57-63, 2007.

D. Geldart, Types of gas fluidization, Powder Technol, vol.7, pp.285-292, 1973.

M. W. Weber and C. M. Hrenya, Computational study of pressure-drop hysteresis in fluidized beds, Powder Technol, vol.177, pp.170-184, 2007.

J. F. Davidson, D. , and F. Particles, , 1963.

Q. Y. Nguyen, J. N. Kidder, and S. H. Ehrman, Hybrid gas to particle conversion and chemical vapor deposition for the production of porous alumina films, Thin Solid Films, vol.410, pp.42-52, 2002.

A. Ortiz and J. C. Alonso, High quality low temperature aluminium oxide films deposited by ultrasonic spray pyrolysis, J. Mater. Sci. -Mater. Electron, vol.13, pp.7-11, 2002.