S. Abrate, Impact on composite structures, 2005.

W. Cantwell and J. Morton, The impact resistance of composite materials -a review, Composites, vol.22, issue.5, pp.347-62, 1991.

M. Richardson and M. J. Wisheart, Review of low velocity impact properties of composite materials, Compos A Appl Sci Manuf, vol.27, issue.12, pp.1123-1154, 1996.

G. Davies and R. Olsson, Impact on composite structures, Aeronaut J, vol.108, pp.541-63, 1089.

P. Potluri, P. Hogg, M. Arshad, D. Jetavat, and P. Jamshidi, Influence of fiber architecture on impact damage tolerance in 3D woven composites, Appl Compos Mater, vol.19, issue.5, pp.799-812, 2012.

L. Zhijiang, S. Baozhong, and G. Bohong, FEM simulation of 3D angle interlock woven composite under ballistic impact from unit cell approach, Comput Mater Sci, vol.49, issue.1, pp.171-83, 2010.

L. Lv, B. Sun, Y. Qiu, and B. Gu, Energy absorptions and failure modes of 3d orthogonal hybrid woven composites truck by flat-ended rod, Polym Compos, vol.27, issue.4, pp.410-416, 2006.

J. H. Byun, S. W. Song, C. H. Lee, M. K. Um, and B. S. Hwang, Impact properties of laminated composites with stitching fibers, Compos Struct, vol.76, issue.1-2, pp.21-28, 2006.

Y. Luo, L. Lv, B. Sun, Y. Qiu, and B. Gu, Transverse impact behaviour and energy absorption of three-dimensional orthogonal hybrid woven composites, Compos Struct, vol.81, issue.2, pp.202-211, 2007.

C. Ji, B. Sun, Y. Qiu, and B. Gu, Impact damage of 3d orthogonal woven composite circular plates, Appl Compos Mater, vol.14, issue.5, pp.343-62, 2007.

A. F. Johnson and M. Holzapfel, Modelling soft body impact on composite structures, Compos Struct, vol.61, issue.1-2, pp.103-116, 2003.

M. A. Lavoie, A. Gakwaya, M. Nejad-ensan, D. G. Zimcik, and D. Nandlall, Bird's substitute tests results and evaluation of available numerical methods, Int J Impact Eng, vol.36, pp.1276-87, 2009.

F. Dau, D. Kergomard, and Y. , Damage mechanisms in interlock 3X woven composites under low velocity soft impact loading, Composite materials and structures: the way forward, proceeding of the 26th ASC technical conference/2nd joint US-Canada conference on composites, pp.26-28, 2011.

S. Heimbs, B. Van-der-broucke, D. Kergomard, Y. Dau, and F. , Rubber impact on 3D textile composites, Appl Compos Mater, vol.19, issue.3, pp.275-95, 2012.

Y. Duplessis-kergomard, F. Dau, and S. Heims, Choc mou basse énergie sur composite interlock 3X: approche expérimentale et numérique, Rev Matér Techniq, vol.100, issue.6-7, pp.6-7, 2012.

A. C. Bassi, F. Casa, and R. Menditchi, Shore A hardness and thickness, Polym Testing, vol.7, issue.3, pp.165-75, 1987.

J. Harwood, L. Mullins, and A. R. Payne, Stress softening in rubbers: review, Inst Rubber Indus J, vol.1, issue.1, pp.17-26, 1967.

F. Boussu, I. Cristian, and S. Nauman, General definition of 3D warp interlock fabric architecture, Compos B, vol.81, pp.171-88, 2015.

S. Chou, H. C. Chen, and H. E. Chen, Effect of weave structure on mechanical fracture behaviour of three-dimensional carbon fiber fabric reinforced epoxy resin composites, Compos Sci Technol, vol.45, issue.1, pp.23-35, 1992.

K. H. Leong, B. Lee, I. Herszberg, and M. K. Bannister, The effect of binder path on the tensile properties and failure of multilayer woven CFRP composites, Compos Sci Technol, vol.60, issue.1, pp.149-56, 2000.

W. S. Kuo, T. H. Ko, and C. P. Chen, Effect of weaving processes on compressive behaviour of 3D woven composites, Compos A Appl Sci Manuf, vol.38, issue.2, pp.555-65, 2007.

R. Mcilhagger, J. P. Quinn, A. T. Mcilhagger, S. Wilson, D. Simpson et al., The influence of binder tow density on the mechanical properties of spatially reinforced composites. Part2: mechanical properties, Composite Part A, vol.39, issue.2, pp.334-375, 2008.

T. W. Shyr and Y. H. Pan, Impact resistance and damage characteristics of composite laminates, Compos Struct, vol.62, issue.2, pp.193-203, 2003.

T. Mitrevski, I. H. Marshall, and R. Thomson, The influence of impactor shape on the damage to composite laminates, Compos Struct, vol.76, issue.1-2, pp.116-138, 2006.