M. Kotal and A. K. Bhowmick, Polymer nanocomposites from modified clays: recent advances and challenges, Prog. Polym. Sci, vol.51, pp.127-187, 2015.

O. Zabihi, M. Ahmadi, S. Nikafshar, K. C. Preyeswary, and M. Naebe, A technical review on epoxy-clay nanocomposites: Structure, properties, and their applications in fiber reinforced composites, vol.135, pp.1-24, 2018.

P. Dhatarwal, R. J. Sengwa, and S. Choudhary, Effect of intercalated and exfoliated montmorillonite clay on the structural, dielectric and electrical properties of plasticized nanocomposite solid polymer electrolytes, Compos. Commun, vol.5, pp.1-7, 2017.

Y. Zare and K. Y. Rhee, Multistep modeling of Young's modulus in polymer/clay nanocomposites assuming the intercalation/exfoliation of clay layers and the interphase between polymer matrix and nanoparticles, Compos. Part A, vol.102, pp.137-144, 2017.

N. T. Dintcheva, S. Al-malaika, R. Arrigo, and E. Morici, Novel strategic approach for the thermo-and photo-oxidative stabilization of polyolefin/clay nanocomposites, Polym. Degrad. Stab, vol.145, pp.41-51, 2017.

A. A. Silva, B. G. Soares, and K. Dahmouche, Organoclay-epoxy nanocomposites modified with polyacrylates: The effect of the clay mineral dispersion method, Appl. Clay Sci, pp.46-53, 2016.

K. J. Shah, A. D. Shukla, D. O. Shah, and T. Imae, Effect of organic modifiers on dispersion of organoclay in polymer nanocomposites to improve mechanical properties, Polymer, vol.97, pp.525-532, 2016.

P. C. Le-baron, Z. Wang, and T. J. Pinnavaia, Polymer-layered silicate nanocomposites: an overview, Appl. Clay Sci, vol.15, pp.11-29, 1999.

F. M. Uhl, S. P. Davuluri, S. Wong, and D. C. Webster, Organically modified montmorillonites in UV curable urethane acrylate films, Polymer, vol.45, pp.6175-6187, 2004.

W. Liu, S. V. Hoa, and M. Pugh, Organoclay-modified high performance epoxy nanocomposites, Compos. Sci. Technol, vol.65, pp.307-316, 2005.

M. Suguna-lakshmi, B. Narmadha, and B. S. Reddy, Thermal degradation behaviour and kinetic analysis of epoxy/montmorillonite nanocomposites, Polym. Degrad. Stab, vol.80, pp.383-391, 2003.

A. Tcherbi-narteh, M. Hosur, E. Triggs, and S. Jeelani, Thermal stability and degradation of diglycidyl ether of bisphenol A epoxy modified with different nanoclays exposed to UV radiation, Polym. Degrad. Stab, vol.98, pp.759-770, 2013.

P. Kiliaris and C. D. Papaspyrides, Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy, Prog. Polym. Sci, vol.35, pp.902-958, 2010.

G. Choudalakis and A. D. Gotsis, Permeability of polymer/clay nanocomposites: a review, Eur. Polym. J, vol.45, pp.967-984, 2009.

J. Kim, C. Hu, R. S. Woo, and M. Sham, Moisture barrier characteristics of organoclay-epoxy nanocomposites, Compos. Sci. Technol, vol.65, pp.805-813, 2005.

B. Tan and N. L. Thomas, A review of the water barrier properties of polymer/clay and polymer/graphene nanocomposites, J. Membr. Sci, vol.514, pp.595-612, 2016.

L. L. Forestier, F. Muller, F. Villieras, and M. Pelletier, Textural and hydration properties of a synthetic montmorillonite compared with a natural Na-exchanged clay analogue, Appl. Clay Sci, vol.48, pp.18-25, 2010.
URL : https://hal.archives-ouvertes.fr/insu-00433524

H. He, L. Ma, J. Zhu, R. L. Frost, B. K. Theng et al., Synthesis of organoclays: a critical review and some unresolved issues, Appl. Clay Sci, vol.100, pp.22-28, 2014.

R. Fernández, A. I. Ruiz, and J. Cuevas, The role of smectite composition on the hyperalkaline alteration of bentonite, Appl. Clay Sci, vol.95, pp.83-94, 2014.

W. Abdallah and U. Yilmazer, Novel thermally stable organo-montmorillonites from phosphonium and imidazolium surfactants, Thermochim. Acta, vol.525, pp.129-140, 2011.

A. N. Bruce, D. Lieber, I. Hua, and J. A. Howarter, Rational interface design of epoxy-organoclay nanocomposites: role of structure-property relationship for silane modifiers, J. Colloid Interface Sci, vol.419, pp.73-78, 2014.

M. G. Sari, B. Ramezanzadeh, M. Shahbazi, and A. S. Pakdel, Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite, Corros. Sci, vol.92, pp.162-172, 2015.

P. Anadão, L. F. Sato, R. R. Montes, and H. S. De-santis, Polysulphone/montmorillonite nanocomposite membranes: Effect of clay addition and polysulphone molecular weight on the membrane properties, J. Membr. Sci, vol.455, pp.187-199, 2014.

A. Ghazi, E. Ghasemi, M. Mahdavian, B. Ramezanzadeh, and M. Rostani, The application of benzimidazole and zinc cations intercalated sodium montmorillonite as smart ion exchange inhibiting pigments in the epoxy ester coating, Corros. Sci, vol.94, pp.207-217, 2015.

M. G. Sari, M. Shamshiri, and B. Ramezanzadeh, Fabricating an epoxy composite coating with enhanced corrosion resistance through impregnation of functionalized graphene oxide-co-montmorillonite nanoplatelet, Corros. Sci, vol.129, pp.38-53, 2017.

T. X. To, A. T. Trinh, H. N. Truong, K. O. Vu, J. Jorcin et al., Corrosion protection of carbon steel by an epoxy resin containing organically modified clay, Surface Coat. Technol, vol.201, pp.7408-7415, 2007.

A. T. Trinh, T. X. To, K. O. Vu, E. Dantras, C. Lacabanne et al., Incorporation of an indole-3 butyric acid modified clay in epoxy resin for corrosion protection of carbon steel, Surface Coat. Technol, vol.202, pp.4945-4951, 2008.

T. X. To, A. T. Trinh, M. Olivier, C. Vandermiers, N. Guérit et al., Corrosion protection mechanisms of carbon steel by an epoxy resin containing indole-3 butyric acid modified clay, Prog. Org. Coat, vol.69, pp.410-416, 2010.

G. P. Cicileo, B. M. Rosales, F. E. Varela, and J. R. Vilche, Inhibitory action of 8-hydroxyquinoline on the copper corrosion process, Corros. Sci, vol.40, pp.1915-1926, 1998.

A. F. Galio, S. V. Lamaka, M. L. Zheludkevich, L. F. Dick, I. L. Müller et al., Inhibitor-doped sol-gel coatings for corrosion protection of magnesium alloy AZ31, Surface Coat. Technol, vol.204, pp.1479-1486, 2010.

S. Marcelin and N. Pébère, Synergistic effect between 8-hydroxyquinoline and benzotriazole for the corrosion protection of 2024 aluminium alloy: a local electrochemical impedance approach, Corros. Sci, vol.101, pp.66-74, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02074368

F. Chiter, C. Lacaze-dufaure, H. Tang, and N. Pébère, DFT studies of the bonding mechanism of 8-hydroxyquinoline and derivatives on the (111) aluminum surface, PCCP, vol.17, pp.22243-22258, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01264340

I. B. Obot, N. K. Ankah, A. A. Sorour, Z. M. Gasem, and K. Haruna, 8-Hydroxyquinoline as an alternative green and sustainable acidizing oilfield corrosion inhibitor, Sustain. Mater. Technol, vol.14, pp.1-10, 2017.

M. R. Bagherzadeh and T. Mousavinejad, Preparation and investigation of anticorrosion properties of the water-based epoxy-clay nanocoating modified by Na + -MMT and Cloisite 30B, Prog. Org. Coat, vol.74, pp.589-595, 2012.

G. Malucelli, A. D. Gianni, F. Deflorian, M. Fedel, and R. Bongiovanni, Preparation of ultraviolet-cured nanocomposite coatings for protecting against corrosion of metal substrates, Corros. Sci, vol.51, pp.1762-1771, 2009.

W. Guo, X. Meng, Y. Liu, L. Ni, Z. Huc et al., Synthesis and application of 8-hydroxyquinoline modified magnetic mesoporous carbon for adsorption of multivariate metal ions from aqueous solutions, J. Ind. Eng. Chem, vol.21, pp.340-349, 2015.

M. D. Tomic, B. Dunjic, J. B. Bajat, V. Likic, J. Rogan et al., Anticorrosive epoxy/clay nanocomposite coatings: rheological and protective properties, J. Coat. Technol. Res, vol.13, pp.439-456, 2016.

D. You, N. Pébère, and F. Dabosi, An investigation of the corrosion of pure iron by electrochemical techniques and in situ observations, Corros. Sci, vol.34, pp.5-15, 1993.

K. D. Patel and H. S. Patel, Synthesis, spectroscopic characterization and thermal studies of some divalent transition metal complexes of 8-hydroxyquinoline, Arabian J. Chem, vol.10, pp.1328-1335, 2017.

K. Zhang, L. Wang, and G. Liu, Copper(II) 8-hydroxyquinolinate 3D network film with corrosion inhibitor embedded for self-healing corrosion protection, Corros. Sci, vol.75, pp.38-46, 2013.

J. Y. Lee and H. K. Lee, Characterization of organobentonite used for polymer nanocomposites, Mater. Chem. Phys, vol.85, pp.410-415, 2004.

S. Filippi, M. Paci, G. Polacco, N. T. Dintcheva, and P. Magagnini, On the interlayer spacing collapse of Cloisite 30B organoclay, Polym. Degrad. Stab, vol.96, pp.823-832, 2011.

L. Beaunier, I. Epelboin, J. C. Lestrade, and H. Takenouti, Etude electrochimique, et par microscopie electronique a balayage, du fer recouvert de peinture, Surface Technol, vol.4, pp.237-254, 1976.

A. S. Nguyen, M. Musiani, M. E. Orazem, N. Pébère, B. Tribollet et al., Impedance study of the influence of chromates on the properties of waterborne coatings deposited on 2024 aluminium alloy, Corros. Sci, vol.109, pp.174-181, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01334885

G. Bouvet, D. D. Nguyen, S. Mallarino, and S. Touzain, Analysis of the non-ideal capacitive behaviour for high impedance organic coatings, Prog. Org. Coat, vol.77, pp.2045-2053, 2014.

E. Shchukina, D. Shchukin, and D. Grigoriev, Effect of inhibitor-loaded halloysites and mesoporous silica nanocontainers on corrosion protection of powder coatings, Prog. Org. Coat, vol.102, pp.60-65, 2017.