A simple and reliable method reducing sulfate to sulfide for multiple sulfur isotope analysis
Résumé
Rationale
Precise analysis of four sulfur isotopes of sulfate in geological and environmental samples provides the means to extract unique information in wide geological contexts. Reduction of sulfate to sulfide is the first step to access such information. The conventional reduction method suffers from a cumbersome distillation system, long reaction time and large volume of the reducing solution. We present a new and simple method enabling the process of multiple samples at one time with a much reduced volume of reducing solution.
Methods
One mL of reducing solution made of HI and NaH2PO2 was added to a septum glass tube with dry sulfate. The tube was heated at 124°C and the produced H2S was purged with inert gas (He or N2) through gas‐washing tubes and then collected by NaOH solution. The collected H2S was converted into Ag2S by adding AgNO3 solution and the co‐precipitated Ag2O was removed by adding a few drops of concentrated HNO3.
Results
Within 2–3 h, a 100% yield was observed for samples with 0.2–2.5 μmol Na2SO4. The reduction rate was much slower for BaSO4 and a complete reduction was not observed. International sulfur reference materials, NBS‐127, SO‐5 and SO‐6, were processed with this method, and the measured against accepted δ34S values yielded a linear regression line which had a slope of 0.99 ± 0.01 and a R2 value of 0.998.
Conclusions
The new methodology is easy to handle and allows us to process multiple samples at a time. It has also demonstrated good reproducibility in terms of H2S yield and for further isotope analysis. It is thus a good alternative to the conventional manual method, especially when processing samples with limited amount of sulfate available.
Origine : Fichiers produits par l'(les) auteur(s)