S. Ozkan, A. Mazare, and P. Schmuki, Critical parameters and factors in the formation of spaced TiO 2 nanotubes by self-organizing anodization, Electrochim Acta, vol.268, pp.435-447, 2018.

C. Toccafondi, W. J. Stepniowski, M. Leoncini, and M. Salerno, Advanced morphological analysis of patterns of thin anodic porous alumina, Mater Charact, vol.94, pp.26-36, 2014.

H. Habazaki, Y. Oikawa, and K. Fushimi, Importance of water content in formation of porous anodic niobium oxide films in hot phosphateglycerol electrolyte, Electrochim Acta, vol.54, issue.3, pp.946-951, 2009.

W. Chen, Q. Tu, and H. Wu, Study on morphology evolution of anodic tantalum oxide films in different using stages of H 2 SO 4 /HF electrolyte, Electrochim Acta, vol.236, pp.140-153, 2017.

H. Shin, J. Dong, and M. Liu, Porous tin oxides prepared using an anodic oxidation process, Adv Mater, vol.16, issue.3, pp.237-240, 2004.

Y. S. Jang, Y. K. Kim, and I. S. Park, Film characteristics of anodic oxidized AZ91D magnesium alloy by applied power, Surf Interface Anal, vol.41, issue.6, pp.524-530, 2009.

F. J. Garcia-garcia, E. V. Koroleva, G. E. Thompson, and G. C. Smith, Anodic film formation on binary Al-Mg and Al-Ti alloys in nitric acid, Surf Interface Anal, vol.42, issue.4, pp.258-263, 2010.

G. Wu, M. Yu, J. Liu, S. Li, L. Wu et al., Surface characteristics of anodic oxide films fabricated in acid and neutral electrolytes on Ti-10V-2Fe-3Al alloy, Surf Interface Anal, vol.45, issue.2, pp.661-666, 2013.

R. C. Furneaux, W. R. Rigdy, and A. P. Davidson, The formation of controlledporosity membranes from anodically oxidized aluminium, Nature, vol.337, issue.6203, pp.147-149, 1989.

H. Masuda and K. Fukuda, Ordered metal nanohole arrays made by a twostep replication of honeycomb structures of anodic alumina, Science, vol.268, issue.5216, pp.1466-1468, 1995.

W. Lee, J. R. Gösele, U. Nielsch, and K. , Fast fabrication of long-range ordered porous alumina membranes by hard anodization, Nat Mater, vol.5, issue.9, pp.741-747, 2006.

W. Lee, K. Schwirn, M. Steinhart, E. Pippel, R. Scholz et al., Structural engineering of nanoporous anodic aluminium oxide by pulse anodization of aluminium, Nat Nanotechnol, vol.3, issue.4, pp.234-239, 2008.

L. Coz, F. Arurault, L. Fontorbes, S. Vilar, V. Datas et al., Chemical composition and structural changes of porous templates obtained by anodizing aluminium in phosphoric acid electrolyte, Surf Interface Anal, vol.42, issue.4, pp.227-233, 2010.

L. Coz, F. Arurault, L. Datas, and L. , Chemical analysis of a single basic cell of porous anodic aluminium oxide templates, Mater Charact, vol.61, issue.3, pp.283-288, 2010.

M. Saenz-de-miera, M. Curioni, P. Skeldon, and G. E. Thompson, Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys, Surf Interface Anal, vol.42, issue.4, pp.241-246, 2010.

Y. Goueffon, L. Arurault, C. Mabru, C. Tonon, and P. Guigue, Black anodic coatings for space applications: study of the process parameters, characteristics and mechanical properties, J Mater Process Technol, vol.209, issue.11, pp.5145-5151, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01851871

S. Zhao, H. Fan, and N. Yin, Image binarization to calculate porosity of porous anodic oxides and derivation of porosity vs current, Mater Res Bull, vol.93, pp.138-143, 2017.

K. Giffard, L. Arurault, and C. Blanc, Dynamic measurements and wettability phenomena in mesoporous anodic films prepared on 1050 and 2024T3 aluminium alloys, Micropor Mesopor Mat, vol.235, pp.32-41, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01566955

B. Priet, G. Odemer, C. Blanc, K. Giffard, and L. Arurault, Effect of new sealing treatments on corrosion fatigue lifetime of anodized 2024 aluminium alloy, Surf Coat Technol, vol.307, pp.206-219, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01480521

M. A. Van-put, A. St, O. Elisseeva, J. De-kok, J. Mol et al., Potentiodynamic anodizing of aluminium alloys in Cr(VI)-free electrolytes, Surf Interface Anal, vol.48, pp.946-952, 2016.

S. J. Wilson and M. H. Stacey, The porosity of aluminium oxide phases derived from well-crystallized boehmite: correlated electron microscope, adsorption, and porosimetry studies, J Colloid Interface Sci, vol.82, issue.2, pp.507-517, 1981.

R. A. Cook and K. C. Hover, Mercury porosimetry of cement-based materials and associated correction factors, Construct Build Mater, vol.7, issue.4, pp.231-240, 1993.

S. Diamond, Mercury porosimetry: an inappropriate method of the measurement of pore size distributions in cement-based materials, Cem Concr Res, vol.30, issue.10, pp.1517-1525, 2000.

J. B. Bessone, The activation of aluminium by mercury ions in nonaggressive media, Corros Sci, vol.48, issue.12, pp.4243-4256, 2006.

V. Moutarlier, M. P. Gigandet, J. Pagetti, and S. Linget, Influence of molybdate species added to sulphuric acid on composition and morphology of the anodic layers formed on 2024 aluminium alloy, Thin Solid Films, vol.483, issue.1-2, pp.197-204, 2005.

A. J. Dekker and W. C. Van-geel, On the amorphous and crystalline oxide layer of aluminium, Philipps Res Rep, vol.2, p.313, 1947.

A. Dekker and A. Middelhoek, Transport number and the structure of porous anodic films on aluminum, J Electrochem Soc, vol.117, issue.4, pp.440-448, 1970.

H. Takahashi and M. Nagayama, The determination of the porosity of anodic oxide films on aluminium by the pore-filling method, Corros Sci, vol.18, issue.10, pp.911-925, 1978.

L. Lemaitre, J. Fransaer, A. P. Van-peteghem, M. Moors, and E. Wettinck, The application of the pore-filling method to the study of the structure of porous anodic films on aluminium, Mater Chem Phys, vol.17, issue.3, pp.285-291, 1987.

F. Debuyck, M. Moors, and A. P. Van-peteghem, The influence of the anodization temperature and voltage on the porosity of the anodization layer on aluminium, Mater Chem Phys, vol.36, issue.1-2, pp.146-149, 1993.

S. Ono and N. Masuko, Dissolution behavior of the barrier layer of porous anodic films formed on aluminium studied by pore-filling technique, J Light Metal Soc Japan, vol.43, issue.9, pp.447-452, 1993.

S. Ono and N. Masuko, Evaluation of pore diameter of anodic porous films formed on aluminum, Surf Coat Technol, vol.169, pp.139-142, 2003.

M. Machkova, A. Girginov, E. Klein, and S. Ikonopisov, Breakdown phenomena during the pore-filling of anodic oxide films on aluminium, Surf Technol, vol.14, issue.3, pp.241-244, 1981.

M. Machkova, E. Klein, A. Girginov, and S. Ikonopisov, Pore filling and attendant breakdown of thick anodic films on aluminium, Surf Technol, vol.22, issue.1, pp.21-28, 1984.

S. Ikonopisov, A. Girginov, and M. Machkova, Galvanoluminescence during the pore filling of anodic films on aluminium formed in sulfuric acid, Electrochim Acta, vol.34, issue.5, pp.631-634, 1989.

A. Girginov, M. Machkova, and S. Ikonopisov, Light emission during the porefilling of anodic alumina films with strong own galvanoluminosity, Electrochim Acta, vol.35, issue.5, pp.825-826, 1990.

A. Girginov, A. Zahariev, and M. Machkova, Kinetics of formation of complex anodic films on aluminium, Mater Chem Phys, vol.76, issue.3, pp.274-278, 2002.

A. Girginov, A. Zahariev, and E. Klein, Electronic conductivity of the (+)aluminum/complex anodic film/electrolyte system, J Mater Sci Mater Electron, vol.13, pp.543-548, 2002.

A. Zahariev and A. Girginov, Formation of complex anodic films on porous alumina matrices, Bul Mater Sci, vol.26, issue.3, p.349, 2003.

C. Girginov, A. Zahariev, and I. Kanazirski, Breakdown phenomena during the formation of complex anodic films on aluminium, C R Acad Bulg Sci, vol.64, pp.1117-1122, 2011.

D. I. Petukhov, K. S. Napolskii, and A. A. Eliseev, Permeability of anodic alumina membranes with branched channels, Nanotechnology, vol.23, issue.6pp, p.335601, 2012.

. Grigor'ev, . Sv, N. A. Grigor'eva, and A. V. Syromyatnikov, Two-dimensional spatially ordered Al 2 O 3 systems: small-angle neutron scattering investigation, JETP Letters, vol.85, issue.9, pp.449-453, 2007.

K. Giffard, L. Arurault, C. Blanc, and D. , How to cite this article

D. Caprio, Accurate evaluations of both porosity and tortuosity of anodic films grown on rolled AA 1050 and on rolled or machined AA 2024 T3, Surf Interface Anal, pp.1-10, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02349832

,