D. Macdonald, Passivity -The key to our metals-based civilization, Pure Appl. Chem, vol.71, pp.951-978, 1999.

H. H. Strehblow, V. Maurice, and P. Marcus, Passivity of metals, Corros. Technol, pp.235-326, 2011.

P. Marcus and V. Maurice, Oxide passive films and corrosion protection, pp.119-144, 2011.

V. Maurice, W. P. Yang, and P. Marcus, XPS and STM study of passive films formed on Fe-22Cr(110) single-crystal surfaces, J. Electrochem. Soc, vol.143, pp.1182-1200, 1996.

P. Marcus and M. E. Bussell, XPS study of the passive films formed on nitrogen-implanted austenitic stainless steels, vol.59, pp.7-21, 1992.

I. Olefjord, The passive state of stainless steels, Mater. Sci. Eng, vol.42, issue.C, pp.161-171, 1980.

I. Olefjord and B. O. Elfstrom, Composition of the surface during passivation of stainless steel, Corrosion, vol.38, issue.1, pp.46-52, 1982.

I. Olefjord and B. O. Elfstrom, Investigation by ESCA of the passive film formed on austenitic stainless steel in oxygenated water, EUROCOR'77, Eur. Congr. on Met. Corros, pp.21-28, 1977.

I. Olefjord and L. Wegrelius, Surface analysis of passive state, Corros. Sci, vol.31, issue.C, pp.89-98, 1990.

P. Jemmely, S. Mischler, and D. Landolt, Tribocorrosion behaviour of Fe-17Cr stainless steel in acid and alkaline solutions, Tribol. Int, vol.32, issue.6, pp.295-303, 1999.

C. R. Clayton, G. P. Halada, and J. R. Kearns, Passivity of high-nitrogen stainless alloys: the role of metal oxyanions and salt films, Mater. Sci. Eng., A, vol.198, issue.1, pp.135-144, 1995.

A. R. Brooks, C. R. Clayton, K. Doss, and Y. C. Lu, On the role of Cr in the passivity of stainless steel, J. Electrochem. Soc, vol.133, pp.2459-2464, 1986.

J. E. Castle and C. R. Clayton, The use of in the X-ray photo-electron spectroscopy analyses of passive layers on stainless steel, Corros. Sci, vol.17, issue.1, pp.7-26, 1977.

T. Massoud, V. Maurice, L. H. Klein, A. Seyeux, and P. Marcus, Nanostructure and local properties of oxide layers grown on stainless steel in simulated pressurized water reactor environment, Corros. Sci, vol.84, pp.198-203, 2014.

V. Maurice, H. Peng, L. H. Klein, A. Seyeux, S. Zanna et al., Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces, Faraday Discuss, vol.180, pp.151-170, 2015.

J. R. Lince, S. V. Didziulis, D. K. Shuh, T. D. Durbin, and J. A. Yarmoff, Interaction of O 2 with the Fe 0.84 Cr 0.16 (001) surface studied by photoelectron spectroscopy, Surf. Sci, vol.277, issue.1, pp.43-63, 1992.

T. C. Lin, G. Seshadri, and J. A. Kelber, A consistent method for quantitative XPS peak analysis of thin oxide films on clean polycrystalline iron surfaces, Appl. Surf. Sci, vol.119, issue.12, pp.83-92, 1997.

S. J. Roosendaal, B. Van-asselen, J. W. Elsenaar, A. M. Vredenberg, and F. H. Habraken, The oxidation state of Fe(100) after initial oxidation in O 2, Surf. Sci, pp.329-337, 1999.

A. P. Grosvenor, B. A. Kobe, and N. S. Mcintyre, Examination of the oxidation of iron by oxygen using X-ray photoelectron spectroscopy and QUASES, Surf. Sci, vol.565, issue.23, pp.151-162, 2004.

M. Lampimäki, K. Lahtonen, P. Jussila, M. Hirsimäki, and M. Valden, Morphology and composition of nanoscale surface oxides on Fe-20Cr-18Ni(111) austenitic stainless steel, J. Electron. Spectrosc. Relat. Phenom, vol.154, issue.3, pp.69-78, 2007.

R. Davies, D. Edwards, J. Gräfe, L. Gilbert, P. Davies et al., The oxidation of Fe, vol.605, pp.1754-1762, 1718.

H. Ali-löytty, P. Jussila, M. Hirsimäki, and M. Valden, Influence of CrN surface compound on the initial stages of high temperature oxidation of ferritic stainless steel, Appl. Surf. Sci, vol.257, issue.17, pp.7783-7791, 2011.

V. Maurice, W. P. Yang, and P. Marcus, X-ray photoelectron spectroscopy and scanning tunneling microscopy study of passive films formed on (100) Fe-18Cr-13Ni single-crystal surfaces, J. Electrochem. Soc, vol.145, issue.3, pp.909-920, 1998.

P. Jussila, K. Lahtonen, M. Lampimäki, M. Hirsimäki, and M. Valden, Influence of minor alloying elements on the initial stages of oxidation of austenitic stainless steel materials, Surf. Interface Anal, vol.40, issue.8, pp.1149-1156, 2008.

M. Aronniemi, J. Sainio, and J. Lahtinen, Chemical state quantification of iron and chromium oxides using XPS: the effect of the background subtraction method, Surf. Sci, vol.578, issue.13, pp.108-123, 2005.

T. Yamashita and P. Hayes, Analysis of XPS spectra of Fe 2+ and Fe 3+ ions in oxide materials, Appl. Surf. Sci, vol.254, issue.8, pp.2441-2449, 2008.

B. P. Payne, M. C. Biesinger, and N. S. Mcintyre, X-ray photoelectron spectroscopy studies of reactions on chromium metal and chromium oxide surfaces, J. Electron. Spectrosc. Relat. Phenom, vol.184, issue.12, pp.29-37, 2011.

M. C. Biesinger, B. P. Payne, A. P. Grosvenor, L. W. Lau, A. R. Gerson et al., Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni, Appl. Surf. Sci, vol.257, issue.7, pp.2717-2730, 2011.

A. P. Grosvenor, M. C. Biesinger, R. S. Smart, and N. S. Mcintyre, New interpretations of XPS spectra of nickel metal and oxides, Surf. Sci, vol.600, issue.9, pp.1771-1779, 2006.

A. M. Salvi, J. E. Castle, J. F. Watts, and E. Desimoni, Peak fitting of the chromium 2p XPS spectrum, Appl. Surf. Sci, vol.90, issue.3, pp.333-341, 1995.

J. E. Castle, H. Chapman-kpodo, A. Proctor, and A. M. Salvi, Curve-fitting in XPS using extrinsic and intrinsic background structure, J. Electron. Spectrosc. Relat. Phenom, vol.106, issue.1, pp.65-80, 2000.

I. Grohmann, E. Kemnitz, A. Lippitz, and W. E. Unger, Curve fitting of Cr 2p photoelectron spectra of Cr 2 O 3 and CrF 3, Surf. Interface Anal, vol.23, issue.13, pp.887-891, 1995.

E. Ünveren, E. Kemnitz, S. Hutton, A. Lippitz, and W. E. Unger, Analysis of highly resolved X-ray photoelectron Cr 2p spectra obtained with a Cr 2 O 3 powder sample prepared with adhesive tape, Surf. Interface Anal, vol.36, issue.1, pp.92-95, 2004.

D. D. Wagman, W. H. Evans, V. B. Parker, R. H. Schumm, and R. L. Nutall, The NBS tables of chemical thermodynamic properties, J. Phys. Chem. Ref. Data, vol.11

G. C. Allen, S. J. Harris, J. A. Jutson, and J. M. Dyke, A study of a number of mixed transition metal oxide spinels using X-ray photoelectron spectroscopy, Appl. Surf. Sci, vol.37, issue.1, pp.111-134, 1989.

P. C. Graat and M. A. Somers, Simultaneous determination of composition and thickness of thin iron-oxide films from XPS Fe 2p spectra, Appl. Surf. Sci, vol.100, pp.36-40, 1996.

P. Graat and M. Somers, Quantitative analysis of overlapping XPS peaks by spectrum reconstruction: Determination of the thickness and composition of thin iron oxide films, Surf. Interface Anal, vol.26, pp.773-782, 1998.

D. J. Coates and A. Hendry, The effect of dispersed nitrides on the oxidation of ferritic alloys, Corros. Sci, vol.22, issue.10, pp.973-989, 1982.

S. J. Roosendaal, A. M. Vredenberg, and F. H. Habraken, The influence of adsorbed N in the initial stages of oxidation of iron, Surf. Sci, vol.402404, pp.135-139, 1998.

D. J. Coates, B. Mortimer, and A. Hendry, The oxidation and corrosion resistance of nitrided iron alloys, Corros. Sci, vol.22, issue.10, pp.951-972, 1982.

H. J. Grabke, R. Dennert, and B. Wagemann, The effect of S, N, and C on the oxidation of Ni-20Cr and Fe-20Cr, vol.47, pp.495-506, 1997.

L. Ma, F. Wiame, V. Maurice, and P. Marcus,

T. Yamashita and P. Hayes, Effect of curve fitting parameters on quantitative analysis of Fe 0.94 O and Fe 2 O 3 using XPS, J. Electron. Spectrosc. Relat. Phenom, vol.152, issue.12, pp.6-11, 2006.

P. M. Sherwood, Curve fitting in surface analysis and the effect of background inclusion in the fitting process, J. Vac. Sci. Technol. A, vol.14, issue.3, pp.1424-1432, 1996.

D. A. Shirley, High-resolution X-ray photoemission spectrum of the valence bands of gold, Phys. Rev. B, vol.5, issue.12, pp.4709-4714, 1972.

S. Doniach and M. ?unji?, Many-electron singularity in X-ray photoemission and X-ray line spectra from metals, J. Phys. C: Solid State Phys, vol.3, issue.2, pp.285-291, 1970.

W. A. Jordaan, J. J. Terblans, and H. C. Swart, The effect of nitrogen on the co-segregation with molybdenum in a Fe-3.5Mo-N(100) single crystal, S. Afr. J. Sci, vol.104, pp.393-397, 2008.

A. P. Grosvenor, B. A. Kobe, and N. S. Mcintyre, Studies of the oxidation of iron by water vapour using X-ray photoelectron spectroscopy and QUASES, Surf. Sci, vol.572, issue.23, pp.217-227, 2004.

J. Dupin, D. Gonbeau, P. Vinatier, and A. Levasseur, Systematic XPS studies of metal oxides, hydroxides and peroxides, Phys. Chem. Chem. Phys, vol.2, pp.1319-1324, 2000.
URL : https://hal.archives-ouvertes.fr/hal-01636425

I. Olefjord, ESCA-studies of the composition profile of low temperature oxide formed on chromium steels -I. Oxidation in dry oxygen, Corros. Sci, vol.15, issue.612, pp.687-696, 1975.

E. Clauberg, J. Janov?c, C. Uebing, H. Viefhaus, and H. J. Grabke, Surface segregation on Fe-25Cr-2Ni-0.14Sb-N,S(100) single crystal surfaces, Appl. Surf. Sci, vol.161, issue.12, pp.35-46, 2000.

C. Uebing, V. Scheuch, M. Kiskinova, and H. P. Bonzel, Segregation of ordered CrN and CrC surface phases on a Fe-15Cr(100) crystal, Surf. Sci, vol.321, issue.1-2, pp.89-99, 1994.

C. Müller, C. Uebing, M. Kottcke, C. Rath, L. Hammer et al., The structure of the surface compound CrN formed by cosegregation on a Fe-15Cr-N(100) single crystal surface, Surf. Sci, vol.400, issue.13, pp.87-94, 1998.

J. M. Hill, D. G. Royce, C. S. Fadley, L. F. Wagner, and F. J. Grunthaner, Properties of oxidized silicon as determined by angular-dependent X-ray photoelectron spectroscopy, Chem. Phys. Lett, vol.44, issue.2, pp.225-231, 1976.

C. J. Powell and A. Jablonski, Progress in quantitative surface analysis by X-ray photoelectron spectroscopy: current status and perspectives, J. Electron. Spectrosc. Relat. Phenom, pp.331-346, 2010.

G. Bhargava, I. Gouzman, C. M. Chun, T. A. Ramanarayanan, and S. L. Bernasek, Characterization of the native surface thin film on pure polycrystalline iron: a high resolution XPS and TEM study, Appl. Surf. Sci, vol.253, issue.9, pp.4322-4329, 2007.

W. P. Yang, D. Costa, and P. Marcus, Chemical composition, chemical states, and resistance to localized corrosion of passive films on an Fe-17%Cr alloy, J. Electrochem. Soc, vol.141, issue.1, pp.111-116, 1994.