G. Caprino, Residual strength prediction of impacted cfrp laminates, Journal of Composite Materials, vol.18, issue.6, pp.508-518, 1984.

W. Cantwell and J. Morton, An assessment of the residual strength of an impact-damaged carbon fibre reinforced epoxy, Composite Structures, vol.14, issue.4, pp.303-317, 1990.

M. Richardson and M. Wisheart, Review of low-velocity impact properties of composite materials, Composites Part A: Applied Science and Manufacturing, vol.27, issue.12, pp.1123-1131, 1996.

A. Mosallam, J. Slenk, and J. Kreiner, Assessment of residual tensile strength of carbon/epoxy composites subjected to low-energy impact, Journal of Aerospace Engineering, vol.21, issue.4, pp.249-258, 2008.

S. Wang, L. Wu, and L. Ma, Low-velocity impact and residual tensile strength analysis to carbon fiber composite laminates, Materials & Design, vol.31, issue.1, pp.118-125, 2010.

V. Balasubramani and S. Boopathy, Prediction of residual tensile strength of laminated composite plates after low velocity impact, Journal of Engineering and Applied Sciences, vol.9, pp.320-325, 2014.

J. Kim and M. Sham, Impact and delamination failure of woven-fabric composites, Composites Science and Technology, vol.60, issue.5, pp.745-761, 2000.

G. Davies, D. Hitchings, and G. Zhou, Impact damage and residual strengths of woven fabric glass/polyester laminates, Composites Part A: Applied Science and Manufacturing, vol.27, issue.12, pp.1147-1156, 1996.

V. Shim and L. Yang, Characterization of the residual mechanical properties of woven fabric reinforced composites after low-velocity impact, International Journal of Mechanical Sciences, vol.47, pp.647-665, 2005.

P. Schubel, J. Luo, and I. Daniel, Impact and post impact behavior of composite sandwich panels, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.1051-1057, 2007.

A. Aktas, M. Aktas, and F. Turan, The effect of stacking sequence on the impact and post-impact behavior of woven/knit fabric glass/epoxy hybrid composites, Composite Structures, vol.103, pp.119-135, 2013.

J. Koo, J. Choi, and C. Seok, Prediction of residual strength of cfrp after impact, Composites Part B: Engineering, vol.54, pp.28-33, 2013.

, Investigation of impact residual strength of woven and non-woven composites

M. Kounain, F. Al-sulaiman, and Z. Khan, Low velocity impact and post impact tensile properties of plain weave woven gfrp composite laminates, International Journal of Engineering and Advanced Technology, vol.5, issue.2, pp.92-99, 2015.

S. Mouhoubi and K. Azouaoui, Residual properties of composite plates subjected to impact fatigue, Journal of Composite Materials, 2018.

A. Bunsell and B. Harris, Hybrid carbon and glass fibre composites, Composites, vol.5, issue.4, pp.157-164, 1974.

J. Aveston and J. M. Sillwood, Synergistic fibre strengthening in hybrid composites, Journal of Materials Science, vol.11, issue.10, pp.1877-1883, 1976.

J. Summerscales and D. Short, Carbon fibre and glass fibre hybrid reinforced plastics, Composites, vol.9, issue.3, pp.157-166, 1978.

G. Marom, S. Fischer, F. Tuler, and H. Wagner, Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour, Journal of Materials Science, vol.13, issue.7, pp.1419-1426, 1978.

P. W. Manders and M. G. Bader, The strength of hybrid glass/carbon fibre composites, Journal of Materials Science, vol.16, issue.8, pp.2246-2256, 1981.

G. Kretsis, A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics, Composites, vol.18, issue.1, pp.13-23, 1987.

M. , Tensile properties of bidirectional glass-carbon hybrid composites: Part i, 2018.

B. Harris and A. Bunsell, Impact properties of glass fibre/carbon fibre hybrid composites, Composites, vol.6, issue.5, pp.197-201, 1975.

K. Saka and J. Harding, A simple laminate theory approach to the prediction of the tensile impact strength of woven hybrid composites, Composites, vol.21, issue.5, pp.439-447, 1990.

A. Enfedaque, J. Molina-aldareguía, F. Gàlvez, C. Gonzàlez, and J. Llorca, Effect of glass fiber hybridization on the behavior under impact of woven carbon fiber/epoxy laminates, Journal of Composite Materials, vol.44, issue.25, pp.3051-3068, 2010.

M. Hosur, M. Adbullah, and S. Jeelani, Studies on the low-velocity impact response of woven hybrid composites, vol.67, pp.253-262, 2005.

K. Imieli?ska, M. Castaings, R. Wojtyra, J. Haras, E. L. Clezio et al., Air-coupled ultrasonic c-scan technique in impact response testing of carbon fibre and hybrid: glass, carbon and kevlar/epoxy composites, Journal of Materials Processing Technology, pp.513-522, 2004.

J. Gustin, A. Joneson, M. Mahinfalah, and J. Stone, Low velocity impact of combination kevlar/carbon fiber sandwich composites, Composite Structures, vol.69, issue.4, pp.396-406, 2005.

M. Sayer, N. Bekta¸s, and O. Sayman, An experimental investigation on the impact behavior of hybrid composite plates, Composite Structures, vol.92, issue.5, pp.1256-1262, 2010.

B. Jang, L. Chen, C. Wang, H. Lin, and R. Zee, Impact resistance and energy absorption mechanisms in hybrid composites, Composites Science and Technology, vol.34, issue.4, pp.305-335, 1989.

C. Wang, B. Jang, J. Panus, and B. Valaire, Impact behavior of hybridfiber and hybrid-matrix composites, Journal of Reinforced Plastics and Composites, vol.10, issue.4, pp.356-378, 1991.

V. Kowsika and R. Mantena, Static and low-velocity impact response characteristics of pultruded hybrid glass-graphite/epoxy composite beams, Journal of Thermoplastic Composite Materials, vol.12, issue.2, pp.121-132, 1999.

I. Rosa, M. F. , G. Pulci, C. Santulli, F. Sarasini et al., Post-impact mechanical characterisation of glass and basalt woven fabric laminates, Applied Composite Materials -APPL COMPOS MATER, vol.19, issue.3-4, pp.1-16, 2011.

S. Nunna, P. Chandra, A. Shrivastava, and S. Jalan, A review on mechanical behavior of natural fiber based hybrid composites, Journal of Reinforced Plastics and Composites, vol.31, issue.11, pp.759-769, 2012.

F. Sarasini, J. Tirillò, M. Valente, L. Ferrante, S. Cioffi et al., Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties, Materials & Design, vol.49, pp.290-302, 2013.

R. Petrucci, C. Santulli, D. Puglia, E. Nisini, F. Sarasini et al., Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion, Composites Part B: Engineering, vol.69, pp.507-515, 2015.

H. Liu, B. G. Falzon, and W. Tan, Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates, Composites Part B: Engineering, vol.136, pp.101-118, 2018.

B. Mahmoud, L. Manseri, A. Rogani, P. Navarro, S. Marguet et al., Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loading, Composite Structures, vol.209, pp.606-615, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01923138

N. Naik, R. Ramasimha, H. Arya, P. S. , and N. Shamarao, Impact response and damage tolerance characteristics of glass-carbon/epoxy hybrid composite plates, Composites Part B: Engineering, vol.32, issue.7, pp.565-574, 2001.

M. Dehkordi, H. Nosraty, M. Shokrieh, G. Minak, and D. Ghelli, The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites, Materials & Design, vol.43, pp.283-290, 2013.

P. Navarro, Etude de l'impact obliqueà haute vitesse sur des structures en sandwich composite : application aux pales d'hélicoptère, 2010.

J. Aubry, Etude expérimentale et numérique d'impact sur structures : application aux pales d'hélicoptères, 2013.