B. T. Araghi, G. L. Manco, M. Bambach, and G. Hirt, Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming, CIRP Ann. -Manuf. Technol, vol.58, pp.225-228, 2009.

E. Hagan and J. Jeswiet, A review of conventional and modern single-point sheet metal forming methods, Proc. IME B J. Eng. Manufact, vol.217, 2003.

J. Verbert, J. R. Duflou, and B. Lauwers, Feature based approach for increasing the accuracy of the SPIF process, Key Eng. Mater, vol.344, 2007.

Y. Li, W. J. Daniel, and P. A. Meehan, Deformation analysis in single-point incremental forming through finite element simulation, Int. J. Adv. Manuf. Technol, vol.88, pp.255-267, 2017.

D. M. Neto, J. M. Martins, M. C. Oliveira, L. F. Menezes, and J. L. Alves, Evaluation of strain and stress states in the single point incremental forming process, Int. J. Adv. Manuf. Technol, vol.85, 2016.

T. Mcanulty, J. Jeswiet, and M. Doolan, Formability in single point incremental forming: a comparative analysis of the state of the art, CIRP J. Manuf. Sci.-Technol, vol.16, pp.43-54, 2017.

S. Gatea, H. Ou, and G. Mccartney, Review on the influence of process parameters in incremental sheet forming, Int. J. Adv. Manuf. Technol, vol.87, pp.479-499, 2016.

E. Leszak, Apparatus and Process for Incremental Dieless Forming, p.3342051, 1967.

H. Iseki and H. Kumon, Forming limit of incremental sheet metal stretch forming using spherical rollers, J. Jpn. Soc. Technol. Plast, vol.35, pp.1336-1336, 1994.

S. Matsubara, Incremental backward bulge forming of a sheet metal with a hemispherical head tool, Journal J.S.T.P, vol.35, pp.1311-1316, 1994.

K. Zheng, D. J. Politis, L. Wang, and J. Lin, A review on forming techniques for manufacturing lightweight complexdshaped aluminium panel components, Int. J. Lightweight Mater. Manuf, vol.1, pp.55-80, 2018.

Y. Kim and J. Park, Effect of process parameters on formability in incremental forming of sheet metal, J. Mater. Process. Technol, vol.130, issue.131, pp.42-46, 2002.

K. Jackson and J. Allwood, The mechanics of incremental sheet forming, J. Mater. Process. Technol, vol.209, pp.1158-1174, 2009.

W. C. Emmens, A. H. Van-den, and . Boogaard, An overview of stabilizing deformation mechanisms in incremental sheet forming, J. Mater. Process. Technol, vol.209, pp.3688-3695, 2009.

K. A. Al-ghamdi and G. Hussain, Threshold tool-radius condition maximizing the formability in SPIF considering a variety of materials: experimental and FE investigations, Int. J. Mach. Tool Manufact, vol.88, 2015.

L. V. Sy, Modeling of Single Point Incremental Forming Process for Metal and Polymeric Sheet, Doctoral School in Industrial Engineering, 2009.

P. A. Martins, N. Bay, M. Skjoedt, and M. B. Silva, Theory of single point incremental forming, CIRP Ann. -Manuf. Technol, vol.57, pp.247-252, 2008.

Y. Fang, B. Lu, J. Chen, D. K. Xu, and H. Ou, Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming, J. Mater. Process. Technol, vol.214, pp.1503-1515, 2014.

J. Lin, Y. Liu, and T. A. Dean, A review on damage mechanisms, models and calibration methods under various deformation conditions, Int. J. Damage Mech, vol.14, pp.299-319, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00571146

R. Zhang, Z. Shao, and J. Lin, A review on modelling techniques for formability prediction of sheet metal forming, Int. J. Lightweight Mater. Manuf, vol.1, pp.115-125, 2018.

S. Wu, A. Reis, P. Teixeira, A. B. Da-rocha, and J. Lino, Damage prediction in incremental forming by using Lemaitre damage model, AIPConferenceProceedings1479, 2012.

Z. Chen and X. Dong, The GTN damage model based on Hill'48 anisotropic yield criterion and its application in sheet metal forming, Comput. Mater. Sci, vol.44, pp.1013-1021, 2009.

M. Gologanu, J. Leblond, G. Perrin, and J. Devaux, Recent extensions of Gurson's model for porous ductile metals, Contin. Micromech, vol.377, pp.61-130, 1997.

M. Brunet, F. Morestin, and H. Walter, Damage identification for anisotropic sheetmetals using a non-local damage model, Int. J. Damage Mech, vol.13, pp.35-57, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00450600

G. Hirt, J. Ames, M. Bambach, R. Kopp, and R. Kopp, Forming strategies and process modelling for CNC incremental sheet forming, CIRP Ann. -Manuf. Technol, vol.53, pp.60679-60688, 2004.

C. F. Guzm-an, S. Yuan, L. Duchêne, E. I. Flores, and A. M. Habraken, Damage prediction in single point incremental forming using an extended Gurson model, Int. J. Solid Struct, vol.151, pp.45-56, 2018.

S. Gatea, H. Ou, B. Lu, and G. Mccartney, Modelling of ductile fracture in single point incremental forming using a modified GTN model, Eng. Fract. Mech, vol.186, pp.59-79, 2017.

J. Li, S. Li, Z. Xie, and W. Wang, Numerical simulation of incremental sheet forming based on GTN damage model, Int. J. Adv. Manuf. Technol, vol.81, pp.2053-2065, 2015.

, ASTM-E8-16a Standard Test Methods for Tension Testing of Metallic Materials

G. Hussain, G. Lin, N. Hayat, N. U. Dar, and A. , New methodologies for the determination of precise forming limit curve in single point incremental forming process, Adv. Mater. Res. 97e101, pp.126-129, 2010.

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metall, vol.32, pp.157-169, 1984.

V. Tvergaard, Influence of void nucleation on ductile shear fracture at a free surface, J. Mech. Phys. Solid, vol.30, issue.82, pp.90025-90029, 1982.

J. Will and H. Nilsson, Parameter Identification of Damage Parameters of LS-DYNA GURSON Material Model from a Tensile Test, 2009.

Z. Zhong, Finite Element Procedures for Contact-impact Problems, 1993.

J. O. Hallquist, T. Ls-dyna®, and . Manual, , 2006.

W. F. Hosford and R. M. Caddell, Metal Forming: Mechanics and Metallurgy, 2011.

Z. Marciniak, J. L. Duncan, and S. J. Hu, Mechanics of Sheet Metal Forming, Butterworth-Heinemann, 2002.

K. A. Al-ghamdi and G. Hussain, Forming forces in incremental forming of a geometry with corner feature: investigation into the effect of forming parameters using response surface approach, Int. J. Adv. Manuf. Technol, vol.76, pp.2185-2197, 2014.

M. Silva, M. Skjødt, P. A. Martins, and N. Bay, Revisiting the fundamentals of single point incremental forming by means of membrane analysis, Int. J. Mach. Tool Manufact, vol.48, pp.73-83, 2008.

J. Smith, R. Malhotra, W. K. Liu, and J. Cao, Deformation mechanics in single-point and accumulative double-sided incremental forming, Int. J. Adv. Manuf. Technol, vol.69, pp.1185-1201, 2013.

S. P. Keeler and W. A. Backhofen, Plastic instability and fracture in sheet stretched over rigid punches, ASM Trans. Q, vol.56, pp.25-48, 1963.