M. L. Hammock, A. Chortos, B. C. Tee, J. B. Tok, and . Bao, 25th anniversary article: The evolution of electronic skin (E-Skin): A brief history, design considerations, and recent progress, Adv. Mater, vol.25, pp.5997-6038, 2013.

J. Mei, Y. Diao, A. L. Appleton, L. Fang, and Z. Bao, Integrated materials design of organic semiconductors for field-effect transistors, J. Am. Chem. Soc, vol.135, pp.6724-6746, 2013.

H. Ren, Q. Tang, Y. Tong, and Y. Liu, benzothiophene Transistors. Materials (Basel), vol.2, p.918, 2017.

A. Tsumura, H. Koezuka, and T. Ando, Macromolecular electronic device : Fieldeffect transistor with a polythiophene thin film, vol.49, pp.1210-1212, 1986.

H. Klauk, Organic thin-film transistors, Chem. Soc. Rev, vol.39, pp.2643-2666, 2010.

J. Zaumseil and H. Sirringhaus, Electron and Ambipolar Transport in Organic Field-Effect Transistors, Chem. Rev, vol.107, pp.1296-1323, 2007.

Y. Yuan, Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method, Nat. Commun, vol.5, p.3005, 2014.

H. Minemawari, Inkjet printing of single-crystal films, Nature, vol.475, pp.364-367, 2011.

H. Ebata, Highly Soluble [1] Benzothieno [3, 2-b] benzothiophene (BTBT) Derivatives for, J. Am. Chem. Soc, vol.129, pp.15732-15733, 2007.

F. Zhang, X. Dai, W. Zhu, H. Chung, and Y. Diao, Large Modulation of Charge Carrier Mobility in Doped Nanoporous Organic Transistors, Adv. Mater, vol.29, p.1700411, 2017.

K. Kotsuki, The importance of spinning speed in fabrication of spin-coated organic thin film transistors: Film morphology and field effect mobility, Appl. Phys. Lett, vol.104, p.233306, 2014.

M. Kano, T. Minari, and K. Tsukagoshi, Improvement of subthreshold current transport by contact interface modification in p -type organic field-effect transistors, Appl. Phys. Lett, vol.94, p.143304, 2009.

M. Abbas, Water soluble poly(1-vinyl-1,2,4-triazole) as novel dielectric layer for organic field effect transistors, Org. Electron, vol.12, pp.497-503, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01004859

P. V. Necliudov, M. S. Shur, D. J. Gundlach, and T. N. Jackson, Modeling of organic thin film transistors of different designs, J. Appl. Phys, vol.88, pp.6594-6597, 2000.

H. Klauk, G. Schmid, and W. Radlik, Contact Resistance in Organic Thin Film Transistors, Solid State Electron, vol.47, pp.297-301, 2002.

L. Comber, P. G. Spear, and W. E. , Electronic transport in amorphous silicon films, Phys. Rev. Lett, vol.25, p.509, 1970.

C. Liu, Critical Impact of Gate Dielectric Interfaces on the Contact Resistance of High-Performance Organic Field-E ff ect Transistors, J. Phys. Chem. C, vol.117, pp.12337-12345, 2013.

C. Liu, Direct and quantitative understanding of the non-Ohmic contact resistance in organic and oxide thin-film transistors, Org. Electron, vol.27, pp.253-258, 2015.

U. Zschieschang, Flexible low-voltage organic thin-film transistors and circuits based on C 10 -DNTT, J. Mater. Chem, vol.22, pp.4273-4277, 2012.

S. Luan and G. W. Neudeck, An experimental study of the source/drain parasitic resistance effects in amorphous silicon thin film transistors, J. Appl. Phys, vol.72, pp.766-772, 1992.

C. Liu, Y. Xu, and Y. Y. Noh, Contact engineering in organic field-effect transistors, Mater. Today, vol.18, pp.79-96, 2015.

Y. Yun, Enhanced Performance of Thiophene-Rich Heteroacene, Dibenzothiopheno [6, 5-b: 6?, 5?-f] Thieno [3, 2-b] Thiophene Thin-Film Transistor With MoO x Hole Injection Layers, IEEE Electron Device Lett, vol.38, pp.649-652, 2017.

J. Yun, W. Jang, T. Lee, Y. Lee, and A. Soon, Aligning the Band Structures of Polymorphic Molybdenum Oxides and Organic Emitters in Light-Emitting Diodes, Phys. Rev. Appl, vol.7, p.24025, 2017.

C. Wang, I. Irfan, X. Liu, and Y. Gao, Role of molybdenum oxide for organic electronics: Surface analytical studies, J. Vac. Sci. Technol. B, Nanotechnol. Microelectron. Mater. Process. Meas. Phenom, vol.32, p.40801, 2014.

J. Meyer, A. Shu, M. Kröger, and A. Kahn, Effect of contamination on the electronic structure and hole-injection properties of MoO 3/organic semiconductor interfaces, Appl. Phys. Lett, vol.96, p.133308, 2010.

J. Huang, T. Huang, H. Wei, K. Ho, and C. Chu, Wet-milled transition metal oxide nanoparticles as buffer layers for bulk heterojunction solar cells, RSC Adv, vol.2, pp.7487-7491, 2012.

Y. Ameen, M. Pradhan, S. Remyth-suresh, M. Reddy, and V. S. , MoO3 anode buffer layer for efficient and stable small molecular organic solar cells, Opt. Mater. (Amst), vol.39, pp.134-139, 2015.

H. Chen, Enhanced performance and air stability of 3.2% hybrid solar cells: how the functional polymer and CdTe nanostructure boost the solar cell efficiency, Adv. Mater, vol.23, pp.5451-5455, 2011.

L. Lyu, The correlations of the electronic structure and film growth of 2,7-diocty[1]benzothieno[3,2-b]benzothiophene (C8-BTBT) on SiO 2, Phys. Chem. Chem. Phys, vol.19, pp.1669-1676, 2017.

J. Meyer, Transition metal oxides for organic electronics: Energetics, device physics and applications, Adv. Mater, vol.24, pp.5408-5427, 2012.

K. X. Steirer, Energy level alignment and morphology of Ag and Au nanoparticle recombination contacts in tandem planar heterojunction solar cells, J. Phys. Chem. C, vol.117, pp.22331-22340, 2013.