, COMMUNICATION FROM THE COMMISSION TO THE COUNCIL AND THE EUROPEAN PARLIAMENT Integrated Product Policy Building on Environmental LifeCycle Thinking, vol.302, 2003.

, European Commission, Commission Recommendation (EU), 1318.

B. Palacios-munoz, L. Gracia-villa, I. Zabalza-bribián, and B. López-mesa, Simplified structural design and LCA of reinforced concrete beams strengthening techniques, Eng. Struct, vol.174, pp.418-432, 2018.

I. Zabalza-bribián, A. Aranda-usón, and S. Scarpellini, Life cycle assessment in buildings: State-ofthe-art and simplified LCA methodology as a complement for building certification, Build. Environ, vol.44, pp.2510-2520, 2009.

I. Zabalza-bribián, A. Valero, A. Aranda-usón, and E. Llera, Methodological aspects and design implications to achieve life cycle low emission buildings. A case study: LCA of a new university building, 2013.

O. Ortiz-rodríguez, F. Castells, and G. Sonnemann, Life cycle assessment of two dwellings: One in

. Spain, Colombia, a country under development, Sci. Total Environ, vol.408, pp.2435-2443, 2010.

R. M. Cuéllar-franca and A. Azapagic, Environmental impacts of the UK residential sector: Life cycle assessment of houses, Build. Environ, vol.54, pp.86-99, 2012.

F. Nemry, A. Uihlein, C. M. Colodel, C. Wetzel, A. Braune et al.,

S. Gallon, Y. Niemeier, and . Frech, Options to reduce the environmental impacts of residential buildings in the European Union-Potential and costs, Energy Build, vol.42, pp.976-984, 2010.

A. Vilches, A. Garcia-martinez, and B. Sanchez-montañes, Life cycle assessment (LCA) of building refurbishment: A literature review, Energy Build, 2017.

,

A. A. Famuyibo, A. Duffy, and P. Strachan, Achieving a holistic view of the life cycle performance of existing dwellings, Build. Environ, vol.70, pp.90-101, 2013.

H. Mohammadpourkarbasi and S. Sharples, Eco-Retrofitting Very Old Dwellings : Current and Future Energy and Carbon Performance for Two Uk Cities, PLEA 2013 Sustain, 2013.

B. Peuportier, Assessment and design of a renovation project using life cycle analysis and Green Building Tool, Proc. Int. Conf. -Challenge, Knowledge, Solut., in-house publishing, pp.352-357, 2002.

G. Assefa and C. Ambler, To demolish or not to demolish: Life cycle consideration of repurposing buildings, Sustain. Cities Soc, vol.28, pp.146-153, 2017.

G. Ding, Demolish or refurbish-Environmental benefits of housing conservation, Australas. J. Constr. Econ. Build, vol.13, pp.18-34, 2013.

M. D. Alba-rodríguez, A. Martínez-rocamora, P. González-vallejo, A. Ferreira-sánchez, and M. ,

. Marrero, Building rehabilitation versus demolition and new construction: Economic and environmental assessment, Environ. Impact Assess. Rev, vol.66, pp.115-126, 2017.

Y. Schwartz, R. Raslan, and D. Mumovic, The life cycle carbon footprint of refurbished and new buildings -A systematic review of case studies, Renew. Sustain. Energy Rev, vol.81, pp.231-241, 2018.

W. Pan, K. Li, and Y. Teng, Rethinking system boundaries of the life cycle carbon emissions of buildings, Renew. Sustain. Energy Rev, vol.90, pp.379-390, 2018.

H. Islam, M. Jollands, and S. Setunge, Life cycle assessment and life cycle cost implication of residential buildings -A review, Renew. Sustain. Energy Rev, vol.42, pp.129-140, 2015.

K. Adalberth, A. Almgren, and E. H. Petersen, Life-Cycle Assessment of Four Multi-Family Buildings, Int. J. Low Energy Sustain. Build, 2001.

C. D. Frenette, C. Bulle, R. Beauregard, A. Salenikovich, and D. Derome, Using life cycle assessment to derive an environmental index for light-frame wood wall assemblies, Build. Environ, vol.45, pp.2111-2122, 2010.

U. Iyer-raniga and J. P. Wong, Evaluation of whole life cycle assessment for heritage buildings in

. Australia, Build. Environ, vol.47, pp.138-149, 2012.

O. Ortiz, C. Bonnet, J. C. Bruno, and F. Castells, Sustainability based on LCM of residential dwellings: A case study in Catalonia, Spain, Build. Environ, 2009.

K. Adalberth, Energy use during the life cycle of single-unit dwellings: Examples, Build. Environ, vol.32, pp.321-329, 1997.

I. M. Johnstone, Energy and mass flows of housing: A model and example, Build. Environ, vol.36, pp.27-41, 2001.

H. Bergsdal, H. Brattebø, R. A. Bohne, and D. B. Müller, Dynamic material flow analysis for Norway's dwelling stock, Build. Res. Inf, vol.35, pp.557-570, 2007.

M. Aksözen, U. Hassler, and N. Kohler, Reconstitution of the dynamics of an urban building stock, Build. Res. Inf, 2017.

A. Haapio, Service Life of a Building in Environmental Assessment of Buildings, 2008.

J. and M. Carrió, Durability vs Vulnerability, Inf. La Construcción, vol.59, pp.43-58, 2007.

H. Budelmann, A. Holst, and A. Wachsmann, Durability related life-cycle assessment of concrete structures : Mechanisms , models , implementation, Civ. Infrastruct. Syst, pp.75-86, 2013.

V. L. Ta, S. Bonnet, T. Senga-kiesse, and A. Ventura, A new meta-model to calculate carbonation front depth within concrete structures, Constr. Build. Mater, vol.129, pp.172-181, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01602476

F. Pedrosa and C. Andrade, Corrosion induced cracking: Effect of different corrosion rates on crack width evolution, Constr. Build. Mater, vol.133, pp.525-533, 2017.

K. Tuutti, Corrosion of steel in concrete, Swedish Cem. Concr. Res. Inst, p.469, 1982.

S. W. Tang, Y. Yao, C. Andrade, and Z. J. Li, Recent durability studies on concrete structure, Cem. Concr. Res, vol.78, pp.143-154, 2015.

. Ministry and . Development, Proyecto de Real Decreto por el que se modifica el Real Decreto 314/2006, de 17 de marzo, por el que se aprueba el Código Técnico de la Edificación_Anejo I DB HE Ahorro de Energía, pp.1-51, 2018.

, Passive House Institute, Criteria for the Passive House, 2016.

B. Peuportier, I. Blanc, and . Sommereux, Simulation tool with its expert interface for the thermal design of multizone buildings, Int. J. Sol. Energy, vol.8, pp.109-120, 1990.
URL : https://hal.archives-ouvertes.fr/hal-00520077

, EN-1992-1-1: Eurocode 2: Design of concrete structures -Part 1-1 : General rules and rules for buildings, The European Union Per

I. E. Torroja and H. A. Instrucción, 61 Especial para estructuras de hormigón armado, 1961.

. Ministry and . Development, Instrucción de Hormigón Estructural (EHE-08), 2008.

, Model Code 2010, Fib Model Code Concr, The International Federation for Structural Concrete (fib), pp.114-148, 2011.

C. Andrade, Modelos de propagación del deterioro del hormigón, 2018.

, Pathol. Rehabil. Technol. Herit. Manag, pp.835-842, 2018.

M. ?omodíková, D. Lehký, J. Dole?el, and D. Novák, Modeling of degradation processes in concrete: Probabilistic lifetime and load-bearing capacity assessment of existing reinforced concrete bridges, Eng. Struct, vol.119, pp.49-60, 2016.

, Bulletin No. 80. Partial factor methods for existing concrete structures. Recommendation, 2016.

R. Frischknecht, N. Jungbluth, H. Althaus, G. Doka, T. Heck et al., Overview and Methodology, ecoinvent report, issue.1, 2004.

B. Polster, B. Peuportier, I. Sommereux, P. Diaz-pedregal, C. Gobin et al., Evaluation of the environmental quality of buildings -a step towards a more environmentally conscious design, Sol. Energy, vol.57, pp.219-230, 1996.

, European Parliament and the Council of the European Union

, European Parliament and of the Council of, on waste and repealing certain Directives, 2008.

N. Bizcocho-tocón, Aplicación del análisis de ciclo de vida a la gestión de los residuos de construcción, 2014.

S. A. Cype-ingenieros, Generador de precios de la construcción, España. CYPE Ing, 2016.

B. Marteinsson, Service Life Estimation in the Design of Buildings, 2005.

L. Rincón, G. Pérez, and L. F. Cabeza, Service life of the dwelling stock in Spain, Int. J. Life Cycle Assess, vol.18, pp.919-925, 2013.

B. Palacios-munoz, B. López-mesa, and L. Gracia-villa, Influence of refurbishment and service life of reinforced concrete buildings structures on the estimation of environmental impact_In press, Int. J. Life Cycle Assess, vol.18, 2019.