A normalised residence time transport equation for the numerical simulation of combustion with high-temperature air
Résumé
This study concerns the numerical simulation of turbulent non-premixed combustion in highly preheated air streams. One of the objectives is to settle an efficient computational procedure to proceed with the numerical simulation of large-scale industrial devices. It is also expected that the availability of such a computational framework may facilitate comprehensive sensitivity analyses as well as the development of mathematical models able to represent turbulence-chemistry interactions (TCI) in such conditions. Based on the salient physical ingredients that characterise scalar mixing, propagation, and self-ignition processes, a turbulent combustion modelling framework is thus introduced and applied to the numerical simulation of well-documented laboratory flames. In the corresponding geometries, the bulk flow velocities of the reactants streams can reach rather large values, which lead the flame to lift from the burner rim. Partially premixed flame edges thus stabilise the whole flame structure and the temperature of the oxidising stream can be increased by vitiation with burned gases so as to promote the corresponding flame-stabilisation processes. For sufficiently large values of the vitiated airstream temperature, self-ignition mechanisms may be triggered thus leading to a competition between mixing, propagation, and ignition processes. In this context, the ratio of the residence time to the self-ignition delay is thought to be a relevant variable to delineate the possible influence of ignition phenomena. Therefore, a modelled transport equation for this normalised residence time is considered. The performance of the corresponding modelling proposal is analysed with special emphasis placed on its ability to reproduce ‘memory’ or ‘lagrangian’ effects related to thermal aging processes. In this respect, it is noteworthy that the present set of computations makes use of tabulated quantities associated to (i) steady laminar one-dimensional diffusion flamelets, so as to describe the composition of combustion products, (ii) steady laminar one-dimensional premixed flamelets, to describe the flame brush propagation, and (iii) temporal evolution of zero-dimensional homogeneous mixtures to account for the possible occurrence of self-ignition phenomena. In particular, the tabulated self-ignition time value is used to evaluate the increase in the normalised residence time. Finally, two modelling parameters are put into evidence and studied through a detailed sensitivity analysis.