A. J. Chen, J. Rotter, J. M. Ooi, and J. Y. , Assessment of rolling resistance models in discrete element simulations, Powder Technol, vol.206, pp.269-282, 2011.

R. Artoni, A. Soligo, J. M. Paul, and P. Richard, Shear localization and wall friction in confined dense granular flows, Journal of Fluid Mechanics, vol.849, pp.395-418, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01823393

, Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell, ASTM D7891-15, 2015.

X. Bednarek, S. Martin, A. Ndiaye, V. Peres, and O. Bonnefoy, Calibration of DEM parameters on shear test using Kriging method, EPJ Web of Conf, vol.140, p.15016, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01570602

X. Bednarek, Simulation numérique discrète de l'homogénéisation de poudres dans un mélangeur conique à vis, 2018.

R. J. Berry, M. S. Bradley, and R. G. Mcgregor, Brookfield powder flow tester-results of round robin tests with CRM-116 limestone powder, Proceedings of the Institution of Mechanical Engineers, vol.229, pp.215-230, 2015.

G. Capone, V. Agostino, S. Della-valle, and D. Guida, Stick-slip instability analysis, vol.27, pp.111-118, 1992.

C. J. Coetzee, Calibration of the discrete element method and the effect of particle shape, Powder Technol, vol.297, pp.50-70, 2016.

C. J. Coetzee, Review: Calibration of the discrete element method, Powder Technol, vol.310, pp.104-142, 2017.

C. J. Coetzee and D. N. Els, Calibration of granular material parameters for DEM modelling and numerical verification by blade-granular material interaction, Journal of Terramechanics, vol.46, pp.15-26, 2009.

J. F. Carr and D. M. Walker, an annular shear cell for granular material, Powder Technol, vol.1, pp.369-373, 1968.

P. A. Cundall and O. D. Strack, A discrete numerical model for granular assemblies, Geotechnique, vol.29, pp.47-65, 1979.

R. Freeman, Measuring the flow properties of consolidated, conditioned and aerated powders-A comparative study using a powder rheometer and a rotational shear cell, Powder Technol, vol.174, pp.25-33, 2007.

T. Gröger and A. Katterfeld, On the numerical calibration of discrete element models for the simulation of bulk solids, Comput. Aided Cem. Eng, vol.21, pp.533-538, 2006.

H. Hertz, Translated and reprinted in English in Hertz's Miscellaneous Papers, J. Reine Angew. Math, vol.92, p.5, 1881.

A. W. Jenike, Storage and Flow of Solids, p.53, 1964.

A. W. Jenike, Quantitative design of mass flow bins, Powder Technol, vol.1, pp.237-244, 1967.

K. L. Johnson, K. Kendall, and A. D. Roberts, Surface energy and the contact of elastic solids, Proc. R. Soc. Lond. A Math. Phys. Sci, vol.324, pp.301-313, 1971.

L. Kempton, D. Pinson, S. Chew, P. Zulli, and A. Yu, Simulation of macroscopic deformation using a sub-particle DEM approach, Powder Technol, vol.223, pp.19-26, 2012.

C. Kloss, C. Goniva, and S. Pirker, LIGGGHTS -open source discrete element of granular materials based on LAMMPS, The Minerals, Metals & Materials Society, pp.781-788, 2011.

M. Kodam, R. Bharadwaj, J. Curtis, B. Hancock, and C. Wassgren, Force model considerations for glued-sphere discrete element method simulations, Chem. Eng. Sci, vol.64, pp.3466-3475, 2009.

S. Koynov, B. Glasser, and F. Muzzio, Comparison of three rotational shear cell testers: Powder Flowability and bulk density, Powder Technol, vol.283, pp.103-112, 2015.

M. Leturia, M. Benali, S. Lagarge, I. Ronga, and S. Kashayar, Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods, Powder Technol, vol.253, pp.406-423, 2014.

H. Louati, Experimental and numerical study of humid granular material: influence of liquid content in quasi-static regime, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01426070

H. Louati, D. Oulahna, and A. Deryck, Apparent friction and cohesion of a partially wet granular material in steady-state shear, Powder Technol, vol.278, pp.536-553, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01611095

H. Louati, D. Oulahna, and A. Deryck, Effect of the particle size and the liquid content on the shear behaviour of wet granular material, Powder Technol, vol.315, pp.398-409, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01619249

R. D. Mindlin and H. Deresiewicz, Elastic spheres in contact under varying oblique force, Trans. ASME, J. Appl. Mech, vol.20, pp.327-344, 1953.

Z. Ning and M. Ghadiri, Distinct element analysis of attrition of granular solids under shear deformation, Chem. Eng. Sci, vol.61, pp.5991-6001, 2006.

M. Obermayr, C. Vrettos, P. Eberhard, and T. Dauwel, A discrete element model and its experimental validation for the prediction of draft forces in cohesive soil, Journal of Terramechanics, vol.53, pp.93-104, 2014.

M. O. Robbins, Jamming, friction and unsteady rheology (1999) Cond-mat/9912337

D. Schulze, Powders and bulk solids: behaviour, characterisation, storage and flow, 2008.

J. Schwedes, Consolidation and flow of cohesive bulk solids, Chemical engineering Science, vol.57, pp.287-294, 2002.

J. Schwedes and D. Schulze, Measurement of flow properties of bulk solids, Powder Technol, pp.59-68, 1990.

H. Shi, R. Mohanty, S. Chakaravarty, R. Cabiscol, M. Morgeneyer et al., Effect of Particle Size and Cohesion on Powder Yielding and Flow, vol.35, pp.226-250, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02148550

T. A. Simons, R. Weiler, S. Strege, S. Bensmann, M. Schilling et al., A ring shear tester as calibration experiment for DEM simulations in agitated mixers -a sensitivity study, Procedia Engineering, vol.102, pp.741-748, 2015.

G. Tardos, S. Mcnamara, and I. Talu, Slow and intermediate flow of a frictional bulk powder in the couette geometry, Powder Technol, vol.131, pp.23-39, 2003.

Y. Tsuji, T. Tanaka, and T. Ishida, Langrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe, Powder Technol, vol.71, pp.239-245, 1992.

A. Vasilenko, B. J. Glasser, and F. J. Muzzio, Shear and flow behaviour of pharmaceutical blends -Method comparison study, Powder Technol, vol.208, pp.628-639, 2011.

A. Vasilenko, S. Koynov, B. J. Glasser, and F. J. Muzzio, Role of consolidation state on the measurement of bulk density and cohesion, Powder Technol, vol.239, pp.366-373, 2013.

S. Zhao, X. Zhou, and W. Liu, Discrete element simulations of direct shear tests with particle angularity effect, Granular Matter, vol.17, pp.793-806, 2015.

Y. C. Zhou, B. D. Wright, R. Y. Yang, B. H. Xu, and A. B. Yu, Rolling friction in the dynamic simulation of sandpile formation, Physica A: Statistical Mechanics and its Applications, vol.269, pp.536-553, 1999.