, Le Comptage de l'énergie, Dunod éd, ADEME, 2014.

R. Anantharaman, Process Plants with Emphasis on Heat Exchanger Networks: Optimization, Thermodynamics and Insight, 2011.

R. Anantharaman, O. Abbas, and T. Gundersen, Energy level composite curves -a new graphical methodology for the integration of energy intensive processes, Applied Thermal Engineering, vol.26, pp.1378-1384, 2006.

A. Aspelund, D. Berstad, and T. Gundersen, An extended pinch analysis and process Integration procedure utilizing pressure based exergy for subamabient cooling, Applied Thermal Engineering, vol.27, pp.2633-2649, 2007.

N. Asprion, B. Rumpf, and A. Gritsch, Work flow in process development for energy efficient processes, Applied Thermal Engineering, vol.31, pp.2067-2072, 2011.

A. Ataei, Application of combined pinch and exergy analysis in retrofit of an olefin plant for energy conservation, Scientific Research and Essays, vol.6, pp.2437-2446, 2011.

A. Ataei and C. Yoo, Combined pinch and exergy analysis for energy efficiency optimization in a steam power plant, International Journal of the Physical Science, vol.5, pp.1110-1123, 2010.

Y. Avramenko and A. Kraslawski, Similarity concept for case based design in process engineering, Computers & Chemical Engineering, vol.30, pp.548-557, 2006.

O. Balli, Advanced exergy analyses to evaluate the performance of a military aircraft turbojet engine (TJE) with afterburner system: splitting exergy destruction into unavoidable/avoidable and endogenous/exogenous, Applied Thermal Engineering, vol.111, pp.152-169, 2017.

F. Cziela, G. Tsatsaronis, and Z. Gao, Avoidable thermodynamic inefficiencies and cost in an externally fired combined cycle power plant, vol.31, pp.1472-1489, 2006.

D. Jong, E. D. Keuken, H. Van-der-pol, E. Den-dekker, E. Kerckhoffs et al., Exergy analysis of industrial processes using AI techniques, Computer & Chemical Engineering, vol.20, pp.1631-1636, 1996.

I. Dincer and M. Rosen, EXERGY, 2007.

X. Feng and X. Zhu, Combining pinch and exergy analysis for process modifications, Applied Thermal Engineering, vol.17, pp.249-261, 1997.

X. Feng, X. Zhu, and J. Zheng, A practical Exergy method for system analysis, Energy Conversion Engineering Conference, pp.2068-2071, 1996.

B. Ghorbani, G. R. Salehi, H. Ghaemmaleki, M. Amidpour, and M. H. Hamedi, Simulation and optimization of refrigeration cycle in NGL recovery plants with exergy-pinch analysis, Journal of Natural Gas Science and Engineering, vol.7, pp.35-43, 2012.

M. Gong and G. Wall, On exergy and sustainable development -Part 2: indicators and methods, Exergy, an international Journal, vol.1, pp.217-233, 2003.

S. ;. Gourmelon, F. Inp-toulouse, S. Gourmelon, R. Hetreux, P. Floquet et al., Méthodologie d'Analyse et de retro-conception pour l'amélioration énergétique des procédés industriels, Computers & Chemical Engineering, vol.79, pp.91-112, 2015.

I. L. Greef, J. A. Visser, K. J. Ptasinski, and F. J. Janssen, Utilization of reactor heat in methanol synthesis to reduce compressor duty-application of power cycle principles and simulation tools, Applied Thermal Engineering, vol.22, pp.1549-1558, 2002.

T. Gundersen, Handbook of Process Integration (PI), Klemes J.J, 2013.

T. Gundersen, A. Aspelund, and D. Berstad, Extending pinch analysis and process integration into pressure and fluid phase considerations, Chemical Engineering Translation, vol.18, issue.33, pp.33-38, 2009.

H. Hagi, M. Nemer, Y. Le-moullec, and C. Bouallou, Assessment of the flue gas recycle strategies on oxy-coal power plants using an exergy based methodology, Chemical Engineering, vol.35, pp.343-348, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00880103

A. P. Hinderink, F. P. Kerkhof, A. B. Lie, J. De-swaan-arons, and H. J. Van-der-kooi, Exergy analysis with flowsheeting simulator-II. Application; synthesis gas production from natural gas, Chemical Engineering Science, vol.51, pp.4701-4715, 1996.

M. Homsak and P. Glavic, Pressure exchangers in pinch technology, Computers & Chemical Engineering, vol.20, pp.711-715, 1996.

M. Ishida and K. Kawamura, Energy and exergy analysis of a chemical process system with distributed parameters based on the enthalpy-direction factor diagram, Industrial & Engineering Chemistry Process Design and Development, vol.21, pp.690-695, 1982.

M. Ishida and N. Nakagawa, Exergy Analysis of a pervaporation system and its combination with a distillation column based on the enthalpy-direction factor diagram, Journal of Membrane Science, vol.24, pp.271-283, 1985.

T. J. Kotas, L. L. Butterworths, and P. Goff, The Exergy Method of Thermal Plant Analysis, 1979.

B. Linnhoff and V. Dhole, Shaftwork targets for low-temperature process design, Chemical Engineering Science, vol.47, pp.2081-2091, 1992.

P. Luis, Exergy as a tool for measuring process intensification in chemical engineering, Journal of Chemical Technology & Biotechnology, vol.88, pp.1951-1958, 2013.

P. Luis and B. Van-der-bruggen, Exergy analysis of energy intensive production processes: advancing towards a sustainable chemical industry, Journal of Chemical Technology & Biotechnology, vol.89, pp.1288-1303, 2014.

D. Marmolejo-correa and T. Gundersen, A new procedure for the design of LNG processes by combining exergy and pinch analysis, ECOS Proceedings, pp.24-39, 2012.

M. Matzen, M. Alhajji, and Y. Demirel, Technoeconomics and sustainability of renewable methanol and ammonia productions using wind power based hydrogen, J. Adv. Chemical Engineering, vol.5, issue.3, 2015.

T. Morosuk and G. Tsatsaronis, A new approach to the exergy analysis of absorption machines, vol.33, pp.890-907, 2008.

S. Negny and J. Le-lann, Case-based reasoning for chemical engineering design, Chemical Engineering Research and Design, vol.86, pp.648-658, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00451313

E. Pajula, T. Seuranen, T. Koiranen, and M. Hurme, Synthesis of separation processes by case-based reasoning, Computer & Chemical Engineering, vol.25, pp.775-782, 2001.

F. Petrakopoulou, G. Tsatsaronis, T. Morosuk, and A. Carassai, Conventional and advances exergetic analysis applied to a combined cycle power plant, vol.41, pp.146-152, 2012.

A. Rodriguez-martinez, I. Lopez-alvaredo, R. Banares-alcantara, and A. Aldea, Multi-model knowledge representation on the retrofit of processes, Computer & Chemical Engineering, vol.28, pp.781-788, 2004.

E. Roldan-reyes, S. Negny, G. Cortes-robles, and J. Le-lann, Improvment of online adaptation knowledge representation in the retrofit of processes, Computer & Chemical Engineering, vol.28, pp.781-788, 2004.

M. Sahafzadeh, A. Ataei, N. Tahouni, and M. Panjeshahi, Integration of a gas turbine with an ammonia process for improving energy efficiency, Applied Thermal Engineering, vol.58, pp.593-604, 2013.

T. Seuranen, M. Hurme, and E. Pajula, Synthesis of separation processes by case-based reasoning, Computer & Chemical Engineering, vol.29, pp.1473-1482, 2005.

F. Staine and D. Favrat, Energy integration of industrial processes based on the pinch analysis method extended to include exergy factors, Applied Thermal Engineering, vol.16, pp.497-507, 1996.

L. Stougie and H. J. Van-der-kooi, Possibilities and consequences of the total cumulative exergy loss method in improving the sustainability of power generation, Energy Conversion and Management, vol.107, pp.60-66, 2016.

J. Surma and B. Braunschweig, Case-base retrieval in process engineering: supporting design by reusing flowsheets, Engineering Applications of Artificial Intelligence, vol.9, pp.385-391, 1996.
DOI : 10.1016/0952-1976(96)00036-x

J. Szargut, D. Morris, and F. Steward, Exergy Analysis of Thermal, Chemical and Metallurgical Processes, 1988.

R. Taprap and M. Ishida, Graphic exergy analysis of processes in distillation column by energy-utilization diagrams, AIChE Journal, vol.42, pp.1633-1641, 1996.

S. Tesch, T. Morosuk, and G. Tsatsaronis, Advanced exergy analysis applied to the process of regasification of LNG (liquified natural gas) integrated into an air separation process, vol.117, pp.550-561, 2016.

G. Tsatsaronis, Thermoeconomic analysis and optimization of energy systems, Progress in Energy and Combustion Science, vol.19, pp.227-257, 1993.

G. Tsatsaronis, Definitions and nomenclature in exergy analysis and exergoeconomics, vol.32, pp.249-253, 2007.

G. Tsatsaronis, Definitions and nomenclature in exergy analysis and exergoeconomics, vol.32, pp.249-253, 2007.
DOI : 10.1016/j.energy.2006.07.002

T. Umeda, T. Harada, and K. Shiriko, Thermodynamics approach to the synthesis of heat integration systems in chemical processes, Computer & Chemical Engineering, vol.3, pp.273-282, 1979.

W. Prosim and S. A. , ProSim-Software and Services in Process Simulation