D. Hopkinson, A method of measuring the pressure produced in the detonation 386 of high explosives or by the impact of bullets, Phil. Trans. Roy. Soc. A, vol.213, p.437, 1914.

H. Kolsky, An investigation of the mechanical properties of materials at very 389 high rates of loading, Proc. Phys. Soc. London, vol.62, p.676700, 1949.

M. Sutton, J. Orteu, and H. Schreier, Image correlation for shape, motion and 391 deformation measurements: Basic Concepts, Theory and Applications, p.392

J. Field, S. Walley, W. Proud, H. Goldrein, and C. Siviour, Review of experimental 394 techniques for high rate deformation and shock studies, Int. J. Impact Eng, vol.30, p.725775, 2004.

F. Hild, A. Bouterf, P. Forquin, and S. Roux, On the Use of Digital Image Correlation 397 for the Analysis of the Dynamic Behavior of Materials, in: The Micro-World 398 Observed by Ultra High-Speed Cameras, p.185206, 2018.

W. Peters and W. Ranson, Digital imaging techniques in experimental stress 400 analysis, vol.21, p.427431, 1982.

M. Sutton, W. Wolters, W. Peters, W. Ranson, and S. Mcneill, Determination of 402 displacements using an improved digital correlation method, Im

W. Peters, W. Ranson, J. Kaltho, and S. Winkler, A study of dynamic near-crack-405 tip fracture parameters by digital image analysis, J. Phys. Coll, vol.46, issue.C5, p.406, 1985.

Y. Chao, P. Luo, and J. Kaltho, An experimental study of the deformation elds 408 around a propagating crack tip, Exp. Mech, vol.38, issue.2, p.7985, 1998.

T. Etoh and Q. Nguyen, Evolution of High-Speed Image Sensors, p.81101, 2018.

F. Barthelat, Z. Wu, B. Prorok, and H. Espinosa, Dynamic torsion testing of 412 nanocrystalline coatings using high-speed photography and digital image 413 correlation, Exp. Mech, vol.43, issue.3, p.331340, 2003.

J. Kajberg and M. Sjödahl, Optical method to study material behaviour at 415 high strain rates, IUTAM Symposium on, p.416

, Field Analyses for Determination of Material Parameters Experimental, p.417

, of Solid Mechanics and its Applications, Numerical Aspects, vol.109, p.3749, 2003.

A. Gilat, T. Schmidt, and J. Tyson, Full eld measurement during a tensile split 420 hopkinson bar experiment, J. Phys. IV, vol.134, p.687692, 2006.

I. Elnasri, S. Pattofatto, H. Zhao, H. Tsitsiris, F. Hild et al., Shock 422 enhancement of cellular structures under impact loading: Part i experiments, p.423

, J. Mech. Phys. Solids, vol.55, p.26522671, 2007.

J. Kajberg and B. Wikman, Viscoplastic parameter estimation by high strain-425 rate experiments and inverse modelling speckle measurements and high-speed 426 photography, Int. J. Solids Struct, vol.44, issue.1, p.145164, 2007.
DOI : 10.1016/j.ijsolstr.2006.04.018
URL : https://doi.org/10.1016/j.ijsolstr.2006.04.018

P. Reu and T. Miller, The application of high-speed digital image correlation, J, p.428

, Strain Anal, vol.43, issue.8, p.673688, 2008.

V. Tarigopula, O. Hopperstad, M. Langseth, A. Clausen, and F. Hild, A study of 430 localisation in dual phase high-strength steels under dynamic loading using 431 digital image correlation and fe analysis, Int. J. Solids Struct, vol.45, issue.2, p.432, 2008.

F. Pierron, M. Sutton, and V. Tiwari, Ultra high speed dic and virtual elds method 434 analysis of a three point bending impact test on an aluminium bar, Exp. Mech, vol.435, issue.4, p.537563, 2011.

D. Saletti, S. Pattofatto, and H. Zhao, Measurement of phase transformation 437 properties under moderate impact tensile loading in a niti alloy, Mech. Mat, vol.438, p.111, 2013.

, Search with PUBLICATION NAME: (international journal of impact 440 engineering) & TOPIC: (image correlation), 2018.

V. Tiwari, M. Sutton, S. Mcneill, S. Xu, X. Deng et al., , p.443

, Application of 3d image correlation for full-eld transient plate deformation 444 measurements during blast loading, International Journal of Impact Engineering, vol.445, issue.6, p.862874, 2009.

D. Dubois, H. Zellmer, and E. Markiewicz, Experimental and numerical analysis of 447 seat belt bunching phenomenon, International Journal of Impact Engineering, vol.448, issue.6, p.763774, 2009.
DOI : 10.1016/j.ijimpeng.2008.11.006

P. Hogström, J. Ringsberg, and E. Johnson, An experimental and numerical study of 450 the eects of length scale and strain state on the necking and fracture behaviours 451 in sheet metals, International Journal of Impact Engineering, vol.36, issue.10, p.452, 2009.

F. Lauro, B. Bennani, D. Morin, and A. Epee, The SE E-method for determination 454 of behaviour laws for strain rate dependent material: Application to polymer 455 material, International Journal of Impact Engineering, vol.37, issue.6, p.715722, 2010.

R. Moura, A. Clausen, E. Fagerholt, M. Alves, and M. Langseth, Impact on hdpe 457 and pvc plates -experimental tests and numerical simulations, International 458 Journal of Impact Engineering, vol.37, issue.6, p.580598, 2010.
DOI : 10.1016/j.ijimpeng.2009.12.004

J. Peirs, P. Verleysen, W. V. Paepegem, and J. Degrieck, Determining the stress-460 strain behaviour at large strains from high strain rate tensile and shear 461 experiments, International Journal of Impact Engineering, vol.38, issue.5, p.406, 2011.

A. Collins, J. Addiss, S. Walley, K. Promratana, F. Bobaru et al., , p.464

D. Williamson, The eect of rod nose shape on the internal ow elds during 465 the ballistic penetration of sand, International Journal of Impact Engineering, vol.466, issue.12, p.951963, 2011.

J. Leblanc and A. Shukla, Response of e-glass/vinyl ester composite panels to 468 underwater explosive loading: Eects of laminate modications, International 469 Journal of Impact Engineering, vol.38, issue.10, p.796803, 2011.

P. Kumar, J. Leblanc, D. Stargel, and A. Shukla, Eect of plate curvature on blast 471 response of aluminum panels, International Journal of Impact Engineering, vol.46, p.7485, 2012.

G. Besnard, F. Hild, J. Lagrange, P. Martinuzzi, and S. Roux, Analysis of necking 474 in high speed experiments by stereocorrelation, Int. J. Impact Eng, vol.49, p.475, 2012.

K. Spranghers, I. Vasilakos, D. Lecompte, H. Sol, and J. Vantomme, Numerical 477 simulation and experimental validation of the dynamic response of aluminum 478 plates under free air explosions, International Journal of Impact Engineering, vol.54, p.8395, 2013.

R. Ambriz, C. Froustey, and G. Mesmacque, Determination of the tensile behavior 481 at middle strain rate of aa6061-t6 aluminum alloy welds, International Journal 482 of Impact Engineering, vol.60, p.107119, 2013.

J. Seidt, J. Pereira, A. Gilat, D. Revilock, and K. Nandwana, Ballistic impact of 484 anisotropic 2024 aluminum sheet and plate, International Journal of Impact 485 Engineering, vol.62, p.2734, 2013.

L. Wang, Y. Ding, and L. Yang, Experimental investigation on dynamic constitutive 487 behavior of aluminum foams by new inverse methods from wave propagation 488 measurements, International Journal of Impact Engineering, vol.62, p.4859, 2013.

M. O'masta, B. Compton, E. Gamble, F. Zok, V. Deshpande et al., , p.490

, Ballistic impact response of an uhmwpe ber reinforced laminate encasing of an 491 aluminum-alumina hybrid panel, International Journal of Impact Engineering, vol.492, p.131144, 2015.

M. Louar, B. Belkassem, H. Ousji, K. Spranghers, D. Kakogiannis et al., , p.494

J. Vantomme, Explosive driven shock tube loading of aluminium plates: 495 experimental study, International Journal of Impact Engineering, vol.86, p.111, 2015.

G. Gruben, M. Langseth, E. Fagerholt, and O. Hopperstad, Low-velocity impact on 498 high-strength steel sheets: An experimental and numerical study, International 499 Journal of Impact Engineering, vol.88, p.153171, 2016.

B. Koohbor, A. Kidane, W. Lu, and M. Sutton, Investigation of the dynamic 501 stress-strain response of compressible polymeric foam using a non-parametric 502 analysis, International Journal of Impact Engineering, vol.91, p.170182, 2016.

M. Omidvar, M. Iskander, and S. Bless, Soil-projectile interactions during low 504 velocity penetration, International Journal of Impact Engineering, vol.93, p.505, 2016.

B. Koohbor, A. Kidane, M. Sutton, X. Zhao, and S. Mallon, Analysis of dynamic 507 bending test using ultra high speed dic and the virtual elds method

H. Xing, Q. Zhang, D. Ruan, S. Dehkhoda, G. Lu et al., Full-eld 510 measurement and fracture characterisations of rocks under dynamic loads using 511 high-speed three-dimensional digital image correlation, International Journal of 512 Impact Engineering, vol.113, p.6172, 2018.

G. Broggiato, L. Casarotto, Z. Prete, and D. Maccarrone, Full-eld strain rate 514 measurement by white-light speckle image correlation, Strain, vol.45, issue.4, p.364, 2009.

G. Besnard, S. Guérard, S. Roux, and F. Hild, A space-time approach in digital 517 image correlation: Movie-DIC, vol.49, p.7181, 2011.

G. Besnard, H. Leclerc, S. Roux, and F. Hild, Analysis of image series through digital 519 image correlation, J. Strain Analysis, vol.47, issue.4, p.214228, 2012.

M. Berny, T. Archer, A. Mavel, P. Beauchêne, S. Roux et al., On the analysis 521 of heat haze eects with spacetime DIC, Opt. Lasers Eng, vol.40, p.544556, 2018.

G. Besnard, F. Hild, and S. Roux, Finite-element displacement elds analysis 523 from digital images: Application to Portevin-Le Chatelier bands, Exp. Mech, vol.524, p.789803, 2006.

F. Hild and S. Roux, Comparison of local and global approaches to digital image 526 correlation, Exp. Mech, vol.52, issue.9, p.15031519, 2012.

. Asd-stan, prEN 4861 P1 Aerospace series-Metrological assessment procedure 528 for kinematic elds measured by digital image correlation, 2018.

M. Berny, C. Jailin, A. Bouterf, F. Hild, and S. Roux, Model Reduction for Space-531

, Time DIC, Mea. Sci. Technol, vol.29, issue.12, p.125008, 2018.

, International Organization for Standardization

F. and L. Carneiro, Um novo método para determinacão da resistência à tração 535 dos concretos, Anais 5a reunião da Associação Brasileira de Normas Técnicas, vol.536, p.127129, 1943.

F. and L. Carneiro, Une nouvelle méthode pour la détermination de la résistance 538 à la traction des bétons, Bull. RILEM, vol.13, p.103108, 1953.

Z. Tomi£evi¢, F. Hild, and S. Roux, Mechanics-aided digital image correlation, J, vol.540

, Strain Analysis, vol.48, p.330343, 2013.