Z. Wang, L. H. Poh, J. Dirrenberger, Y. Zhu, and S. Forest, Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization, Computer Methods in Applied Mechanics and Engineering, vol.323, pp.250-271, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01540814

Z. Wang and L. H. Poh, Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA, Composite Structures, vol.201, pp.486-502, 2018.

K. Jang, H. U. Chung, S. Xu, C. H. Lee, H. Luan et al., Soft network composite materials with deterministic and bio-inspired designs, Nature Communications, vol.6, 2015.

Q. Ma, H. Cheng, K. Jang, H. Luan, K. Hwang et al., A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures, Journal of the Mechanics and Physics of Solids, vol.90, pp.179-202, 2016.

Y. Jiang, Z. Liu, N. Matsuhisa, D. Qi, W. R. Leow et al., Auxetic mechanical metamaterials to enhance sensitivity of stretchable strain sensors, Advanced Materials, vol.30, issue.12, p.1706589, 2018.

X. Ren, R. Das, P. Tran, T. D. Ngo, and Y. M. Xie, Auxetic metamaterials and structures: a review, Smart Materials and Structures, 2018.

R. F. Almgren, An isotropic three-dimensional structure with Poisson's ratio-1, Journal of Elasticity, vol.15, issue.4, pp.427-430, 1985.

P. Theocaris, G. Stavroulakis, and P. Panagiotopoulos, Negative Poisson's ratios in composites with star-shaped inclusions: a numerical homogenization approach, Archive of Applied Mechanics, vol.67, issue.4, pp.274-286, 1997.

M. Shokri-rad, Z. Ahmad, and A. Alias, Computational approach in formulating mechanical characteristics of 3D star honeycomb auxetic structure, Advances in Materials Science and Engineering, 2015.

D. Prall and R. Lakes, Properties of a chiral honeycomb with a Poisson's ratio of ?1, International Journal of Mechanical Sciences, vol.39, issue.3, pp.305-314, 1997.

Y. Zhu, Z. Wang, and L. H. Poh, Auxetic hexachiral structures with wavy ligaments for large elasto-plastic deformation, Smart Materials and Structures, vol.27, issue.5, p.55001, 2018.

H. Ebrahimi, D. Mousanezhad, H. Nayeb-hashemi, J. Norato, and A. Vaziri, 3D cellular metamaterials with planar anti-chiral topology, vol.145, pp.226-231, 2018.

H. Zong, H. Zhang, Y. Wang, M. Y. Wang, and J. Y. Fuh, On two-step design of microstructure with desired Poisson's ratio for AM, Materials & Design, vol.159, pp.90-102, 2018.

I. Masters and K. Evans, Models for the elastic deformation of honeycombs, Composite Structures, vol.35, issue.4, pp.403-422, 1996.

J. Xiong, D. Gu, H. Chen, D. Dai, and Q. Shi, Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting, Materials & Design, vol.120, pp.307-316, 2017.

T. Wang, L. Wang, Z. Ma, and G. M. Hulbert, Elastic analysis of auxetic cellular structure consisting of re-entrant hexagonal cells using a strain-based expansion homogenization method, Materials & Design, vol.160, pp.284-293, 2018.

J. N. Grima and K. E. Evans, Auxetic behavior from rotating squares, Journal of Materials Science Letters, vol.19, issue.17, pp.1563-1565, 2000.

J. Dagdelen, J. Montoya, M. Jong, and K. Persson, Computational prediction of new auxetic materials, Nature Communications, vol.8, issue.1, p.323, 2017.

L. Mizzi, E. Mahdi, K. Titov, R. Gatt, D. Attard et al., Mechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio, Materials & Design, vol.146, pp.28-37, 2018.

S. Babaee, J. Shim, J. C. Weaver, E. R. Chen, N. Patel et al., 3D Soft metamaterials with negative Poisson's ratio, Advanced Materials, vol.25, issue.36, pp.5044-5049, 2013.

X. Ren, J. Shen, P. Tran, T. D. Ngo, and Y. M. Xie, Design and characterisation of a tuneable 3D buckling-induced auxetic metamaterial, Materials & Design, vol.139, pp.336-342, 2018.

Y. He, Y. Zhou, Z. Liu, and K. Liew, Pattern transformation of single-material and composite periodic cellular structures, Materials & Design, vol.132, pp.375-384, 2017.

Y. Prawoto, Seeing auxetic materials from the mechanics point of view: a structural review on the negative Poisson's ratio, vol.58, pp.140-153, 2012.

K. K. Saxena, R. Das, and E. P. Calius, Three decades of auxetics research -materials with negative Poisson's ratio: a review, Advanced Engineering Materials, vol.18, issue.11, pp.1847-1870, 2016.

X. Ren, J. Shen, P. Tran, T. D. Ngo, and Y. M. Xie, Auxetic nail: design and experimental study, Composite Structures, vol.184, pp.288-298, 2018.

X. Ren, J. Shen, A. Ghaedizadeh, H. Tian, and Y. M. Xie, A simple auxetic tubular structure with tuneable mechanical properties, Smart Materials and Structures, vol.25, issue.6, p.65012, 2016.

A. Ingrole, A. Hao, and R. Liang, Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement, Materials & Design, vol.117, pp.72-83, 2017.

Q. Gao, X. Zhao, C. Wang, L. Wang, and Z. Ma, Multi-objective crashworthiness optimization for an auxetic cylindrical structure under axial impact loading, Materials & Design, vol.143, pp.120-130, 2018.

T. Li, Y. Chen, X. Hu, Y. Li, and L. Wang, Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties, Materials & Design, vol.142, pp.247-258, 2018.

M. Kucewicz, P. Baranowski, J. Ma?achowski, A. Pop?awski, and P. P?atek, Modelling, and characterization of 3D printed cellular structures, Materials & Design, vol.142, pp.177-189, 2018.

O. Sigmund, Materials with prescribed constitutive parameters: an inverse homogenization problem, International Journal of Solids and Structures, vol.31, issue.17, pp.2313-2329, 1994.

L. Xia and P. Breitkopf, Design of materials using topology optimization and energy-based homogenization approach in Matlab, Structural and Multidisciplinary Optimization, vol.52, issue.6, pp.1229-1241, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01993111

F. Wang, Systematic design of 3D auxetic lattice materials with programmable Poisson's ratio for finite strains, Journal of the Mechanics and Physics of Solids, vol.114, pp.303-318, 2018.

J. Schwerdtfeger, F. Wein, G. Leugering, R. Singer, C. Körner et al., Design of auxetic structures via mathematical optimization, Advanced Materials, vol.23, pp.2650-2654, 2011.

J. Ganghoffer, I. Goda, A. Novotny, R. Rahouadj, and J. Sokolowski, Homogenized couple stress model of optimal auxetic microstructures computed by topology optimization, ZAMM-Journal of Applied Mathematics and Mechanics, 2017.

S. Czarnecki, T. ?ukasiak, T. Lewí, and . Nski, The isotropic and cubic material designs. Recovery of the underlying microstructures appearing in the least compliant continuum bodies, Materials, vol.10, issue.10, p.1137, 2017.

T. Strek, H. Jopek, E. Idczak, and K. W. Wojciechowski, Computational modelling of structures with non-intuitive behaviour, Materials, vol.10, issue.12, p.1386, 2017.

H. Zhang, Y. Luo, and Z. Kang, Bi-material microstructural design of chiral auxetic metamaterials using topology optimization, Composite Structures, vol.195, pp.232-248, 2018.

A. Clausen, F. Wang, J. S. Jensen, O. Sigmund, and J. A. Lewis, Topology optimized architectures with programmable Poisson's ratio over large deformations, Advanced Materials, vol.27, issue.37, pp.5523-5527, 2015.

C. Wang, S. Xia, X. Wang, and X. Qian, Isogeometric shape optimization on triangulations, Computer Methods in Applied Mechanics and Engineering, vol.331, pp.585-622, 2018.

Y. Wang, Z. Wang, Z. Xia, and L. H. Poh, Structural design optimization using isogeometric analysis: a comprehensive review, Computer Modeling in Engineering & Sciences, 2018.

V. Braibant and C. Fleury, Shape optimal design using B-splines, Computer Methods in Applied Mechanics and Engineering, vol.44, issue.3, pp.247-267, 1984.

W. H. Zhang, D. Wang, and J. Yang, A parametric mapping method for curve shape optimization on 3D panel structures, International Journal for Numerical Methods in Engineering, vol.84, issue.4, pp.485-504, 2010.

D. Wang and W. Zhang, A bispace parameterization method for shape optimization of thin-walled curved shell structures with openings, International Journal for Numerical Methods in Engineering, vol.90, issue.13, pp.1598-1617, 2012.

S. Turteltaub, Functionally graded materials for prescribed field evolution, Computer Methods in Applied Mechanics and Engineering, vol.191, pp.2283-2296, 2002.

S. Turteltaub, Optimal control and optimization of functionally graded materials for thermomechanical processes, International Journal of Solids and Structures, vol.39, issue.12, pp.3175-3197, 2002.

M. J. Mirzaali, S. Janbaz, M. Strano, L. Vergani, and A. A. Zadpoor, Shape-matching soft mechanical metamaterials, Nature, Scientific Reports, vol.8, pp.1-7, 2018.

Y. Wang, H. Xu, and D. Pasini, Multiscale isogeometric topology optimization for lattice materials, Computer Methods in Applied Mechanics and Engineering, vol.316, pp.568-585, 2017.

Y. Han and W. Lu, Evolutionary design of nonuniform cellular structures with optimized Poisson's ratio distribution, Materials & Design, vol.141, pp.384-394, 2018.

H. Niknam, A. Akbarzadeh, D. Rodrigue, and D. Therriault, Architected multi-directional functionally graded cellular plates, Materials & Design, vol.148, pp.188-202, 2018.

M. M. Abdalla, S. Setoodeh, and Z. , Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters, Composite structures, vol.81, issue.2, pp.283-291, 2007.

J. Dirrenberger, S. Forest, and D. Jeulin, Elastoplasticity of auxetic materials, vol.64, pp.57-61, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00732417

J. Dirrenberger, S. Forest, and D. Jeulin, Effective elastic properties of auxetic microstructures: anisotropy and structural applications, International Journal of Mechanics and Materials in Design, vol.9, issue.1, pp.21-33, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00790180

L. Xia and P. Breitkopf, Recent advances on topology optimization of multiscale nonlinear structures, Archives of Computational Methods in Engineering, vol.24, issue.2, pp.227-249, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01993106

D. Da, J. Yvonnet, L. Xia, M. V. Le, and G. Li, Topology optimization of periodic lattice structures taking into account strain gradient, Computers & Structures, vol.210, pp.28-40, 2018.

D. Wang, M. M. Abdalla, and W. Zhang, Buckling optimization design of curved stiffeners for grid-stiffened composite structures, Composite Structures, vol.159, pp.656-666, 2017.

D. Wang, M. M. Abdalla, and W. Zhang, Sensitivity analysis for optimization design of non-uniform curved grid-stiffened composite (NCGC) structures, Composite Structures, vol.193, pp.224-236, 2018.

D. Wang, M. M. Abdalla, Z. Wang, and Z. Su, Streamline stiffener path optimization (SSPO) for embedded stiffener layout design of non-uniform curved grid-stiffened composite (NCGC) structures, Computer Methods in Applied Mechanics and Engineering, vol.191, pp.2283-2296, 2018.

Z. Ding, O. Weeger, H. J. Qi, and M. L. Dunn, 4D rods: 3D structures via programmable 1D composite rods, vol.137, pp.256-265, 2018.

Z. Wu, L. Xia, S. Wang, and T. Shi, Topology optimization of hierarchical lattice structures with substructuring, Computer Methods in Applied Mechanics and Engineering, vol.345, pp.602-617, 2019.

H. M. Kolken and A. Zadpoor, Auxetic mechanical metamaterials, RSC Advances, vol.7, issue.9, pp.5111-5129, 2017.

K. K. Yang, J. H. Zhu, C. Wang, D. S. Jia, L. L. Song et al., Experimental validation of 3D printed material behaviors and their influence on the structural topology design, Computational Mechanics, vol.61, issue.5, pp.581-598, 2018.

B. Caddock and K. Evans, Microporous materials with negative Poisson's ratios. I. Microstructure and mechanical properties, Journal of Physics D: Applied Physics, vol.22, issue.12, p.1877, 1989.

J. N. Grima, R. Gatt, A. Alderson, and K. Evans, On the potential of connected stars as auxetic systems, Molecular Simulation, vol.31, issue.13, pp.925-935, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00514969

G. W. Milton, Composite materials with Poisson's ratios close to ?1, Journal of the Mechanics and Physics of Solids, vol.40, issue.5, pp.1105-1137, 1992.