N. Robert, J. Economou, F. Cornuel, O. Volte, and J. Stephan, Investigation of mixing zones subject to thermal fatigue, International symposium on the contribution of materials investigations to improve the safety and performance of LWRs, 2006.

A. M. Clayton, Thermal shock in nuclear reactors, vol.12, pp.57-83, 1983.

D. G. Cacuci, Handbook of nuclear engineering, vol.I, 2010.

O. Ancelet, S. Chapuliot, G. Henaff, and S. Marie, Development of a test for the analysis of the harmfulness of a 3D thermal fatigue loading in tubes, International Journal of Fatigue, vol.29, issue.3, pp.549-564, 2007.

N. Kasahara, S. Hasebe, and S. Kobaysashi, Spectra Thermal Fatigue Tests Under Frequency Controlled Fluid Temperature Variation: Development of Test Equipment and Preliminary Tests, ASME/JSME 2004 Pressure Vessels and Piping Conference, pp.229-236, 2004.

Y. Lejeail and N. Kasahara, Thermal fatigue evaluation of cylinders and plates subjected to fluid temperature fluctuations, International Journal of Fatigue, vol.27, issue.7, pp.768-772, 2005.

E. Paffumi, K. F. Nilsson, and Z. Szaraz, Experimental and numerical assessment of thermal fatigue in 316 austenitic steel pipes, Engineering Failure Analysis, vol.47, pp.312-327, 2015.

T. Wakai, O. Inoue, M. Ando, and S. Kobayashi, Thermal fatigue crack growth tests and analyses of thick wall cylinder made of Mod. 9Cr-1Mo steel, Nuclear Engineering and Design, vol.295, pp.797-803, 2015.

S. Kimura, H. Kogawa, T. Teramoto, and M. Saito, Crack propagation in first wall of fusion reactor by cyclic thermal stress, Fusion Engineering and Design, pp.569-574, 1998.

A. Fissolo, B. Marini, G. Nais, and P. Wident, Thermal fatigue behaviour for a 316 L type steel, Journal of Nuclear Materials, pp.156-161, 1996.

A. Kane and V. Doquet, Surface crack and cracks networks in biaxial fatigue, Engineering Fracture Mechanics, vol.73, issue.2, pp.233-251, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01820099

C. Gardin, H. N. Le, G. Benoit, and D. Bertheau, Crack growth under thermal cyclic loading in a 304L stainless steel-Experimental investigation and numerical prediction, International Journal of Fatigue, vol.32, issue.10, pp.1650-1657, 2010.

O. Gelineau, C. Escaravage, J. P. Simoneau, and C. Faidy, High cycle thermal fatigue: experience and state of the art in French LMFRs, Transactions of 16th International Conference on Structural Mechanics in Reactor Technology (SMiRT-16), pp.12-17, 2001.

A. Fissolo, S. Amiable, and O. Ancelet, Crack initiation under thermal fatigue: An overview of CEA experience. Part I: Thermal fatigue appears to be more damaging than uniaxial isothermal fatigue, International Journal of Fatigue, vol.31, issue.3, pp.587-600, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00438553

A. Fissolo, C. Gourdin, and O. Ancelet, Crack initiation under thermal fatigue: An overview of CEA experience: Part II (of II): Application of various criteria to biaxial thermal fatigue tests and a first proposal to improve the estimation of the thermal fatigue damage, International Journal of Fatigue, issue.7, pp.1196-1210, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00544273

L. Duff, J. A. Tacchini, B. Stephan, and J. M. , High cycle thermal fatigue issues in RHRS mixing tees and thermal fatigue test on a representative 304 L mixing zone, ASME 2011, 2011.

, Pressure Vessels and Piping Conference, pp.691-699

V. Maillot, A. Fissolo, G. Degallaix, and S. Degallaix, Thermal fatigue crack networks parameters and stability: an experimental study, International Journal of Solids and Structures, vol.42, issue.2, pp.759-769, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00071172

J. I. Lee, L. W. Hu, P. Saha, and M. S. Kazimi, Numerical analysis of thermal striping induced high cycle thermal fatigue in a mixing tee, Nuclear Engineering and Design, vol.239, issue.5, pp.833-839, 2009.

K. J. Metzner and U. Wilke, European THERFAT project-thermal fatigue evaluation of piping system, Tee"-connections. Nuclear Engineering and Design, vol.235, issue.2-4, pp.473-484, 2005.

O. Braillard and D. Edelin, Advanced experimental tools designed for the assessment of the thermal load applied to the mixing tee and nozzle geometries in the PWR plant, 1st International Conference on Advancements in Nuclear Instrumentation, 2009.

C. Robertson, M. C. Fivel, and A. Fissolo, Dislocation substructure in 316L stainless steel under thermal fatigue up to 650 K, Materials Science and Engineering: A, vol.315, issue.1-2, pp.47-57, 2001.

A. and C. R. , Design and Construction Rules for Mechanical Components of Nuclear Installations, 2012.

S. Waldner, Removing the image-doubling in shearography: theory and application, Nondestructive Evaluation of Materials and Composites, vol.2944, pp.247-256, 1996.

D. Nowell, R. J. Paynter, and P. P. De-matos, Optical methods for measurement of fatigue crack closure: moiré interferometry and digital image correlation. Fatigue & fracture of engineering materials & structures, vol.33, pp.778-790, 2010.

M. A. Sutton, J. Orteu, and H. W. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01729219

P. F. De-matos and D. Nowell, Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure, International Journal of Fatigue, vol.31, pp.1795-1804, 2009.

F. Mathieu, F. Hild, and S. Roux, Identification of a crack propagation law by digital image correlation, International Journal of Fatigue, vol.36, issue.1, pp.146-154, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00694317

J. Tong, B. Lin, and Y. W. Lu, Near-tip strain evolution under cyclic loading: In situ experimental observation and numerical modelling, International Journal of Fatigue, vol.71, pp.45-52, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01227246

M. D. Sangid, G. J. Pataky, and H. Sehitoglu, High resolution analysis of opening and sliding in fatigue crack growth, International Journal of Fatigue, vol.37, pp.134-145, 2012.

A. El-bartali, V. Aubin, and S. Degallaix, Fatigue damage analysis in a duplex stainless steel by digital image correlation technique, Fatigue & Fracture of Engineering Materials & Structures, vol.31, issue.2, pp.137-151, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00761463

J. Rupil, S. Roux, F. Hild, and L. Vincent, Fatigue microcrack detection with digital image correlation, The Journal of Strain Analysis for Engineering Design, vol.46, issue.6, pp.492-509, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00615472

Z. Tomi?evi?, S. Roux, and F. Hild, Evaluation of fatigue crack network growth in cast iron for different biaxial loading paths via full-field measurements, International Journal of Fatigue, vol.92, pp.281-303, 2016.

L. Vincent, M. Poncelet, S. Roux, F. Hild, and D. Farcage, Experimental facility for high cycle thermal fatigue tests using laser shocks, Procedia Engineering, vol.66, pp.669-675, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01576648

A. Charbal, L. Vincent, and F. Hild, Characterization of temperature and strain fields during cyclic laser shocks, Quantitative InfraRed Thermography Journal, vol.13, issue.1, pp.1-18, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01576740

Y. Wang, A. Charbal, F. Hild, and L. Vincent, High cycle thermal fatigue of austenitic stainless steel, MATEC Web of Conferences, vol.165, 2018.

Y. Wang, A. Charbal, J. E. Dufour, F. Hild, S. Roux et al., Hybrid multiview correlation for measuring and monitoring thermomechanical fatigue test, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02061580

N. Malesys, L. Vincent, and F. Hild, A probabilistic model to predict the formation and propagation of crack networks in thermal fatigue, International Journal of Fatigue, vol.31, issue.3, pp.565-574, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00322191

J. E. Dufour, F. Hild, and S. Roux, Shape, displacement and mechanical properties from isogeometric multiview stereocorrelation, The Journal of Strain Analysis for Engineering Design, vol.50, issue.7, pp.470-487, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01385643

J. Man, K. Obrtlik, C. Blochwitz, and J. Polak, Atomic force microscopy of surface relief in individual grains of fatigued 316L austenitic stainless steel, Acta Materialia, vol.50, issue.15, pp.3767-3780, 2002.

K. Differt, U. Esmann, and H. Mughrabi, A model of extrusions and intrusions in fatigued metals II. Surface roughening by random irreversible slip, Philosophical Magazine A, vol.54, issue.2, pp.237-258, 1986.

M. A. Bao-tong and C. Laird, Overview of fatigue behavior in copper single crystals-I. Surface morphology and stage I crack initiation sites for tests at constant strain amplitude, Acta Metallurgica, vol.37, issue.2, pp.325-336, 1989.

C. Déprés, C. F. Robertson, and M. C. Fivel, Low-strain fatigue in 316L steel surface grains: a three dimension discrete dislocation dynamics modelling of the early cycles. Part 2: Persistent slip markings and micro-crack nucleation, Philosophical Magazine, vol.86, issue.1, pp.79-97, 2006.

A. Heinz and P. Neumann, Crack initiation during high cycle fatigue of an austenitic steel. Acta metallurgica et materialia, vol.38, pp.1933-1940, 1990.

K. J. Miller, The three thresholds for fatigue crack propagation. In Fatigue and Fracture Mechanics, vol.27, pp.267-286, 1997.

N. Shamsaei and A. Fatemi, Small fatigue crack growth under multiaxial stresses, International Journal of Fatigue, vol.58, pp.126-135, 2014.

M. P. Luong, Infrared thermographic scanning of fatigue in metals, Nuclear Engineering and Design, vol.158, issue.2-3, pp.363-376, 1995.

M. P. Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of materials, vol.28, issue.1-4, pp.155-163, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00111598

L. Rosa, G. Risitano, and A. , Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, issue.1, pp.65-73, 2000.

D. Wagner, N. Ranc, C. Bathias, and P. C. Paris, Fatigue crack initiation detection by an infrared thermography method, Fatigue & Fracture of Engineering Materials & Structures, vol.33, issue.1, pp.12-21, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01686228

O. Plekhov, T. Palin-luc, N. Saintier, S. Uvarov, and O. Naimark, Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography, Fatigue & Fracture of Engineering Materials & Structures, vol.28, issue.1-2, pp.169-178, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01373473

E. Charkaluk, A. Bignonnet, A. Constantinescu, and K. Van, Fatigue design of structures under thermomechanical loadings, Fatigue & Fracture of Engineering Materials & Structures, vol.25, issue.12, pp.1199-1206, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00140317

C. Doudard, S. Calloch, F. Hild, and S. Roux, Identification of heat source fields from infrared thermography: Determination of 'self-heating'in a dual-phase steel by using a dog bone sample, Mechanics of Materials, vol.42, issue.1, pp.55-62, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00430489

X. Maldague and S. Marinetti, Pulse phase infrared thermography, Journal of applied physics, vol.79, issue.5, pp.2694-2698, 1996.

P. J. Forsyth, A unified description of micro and macroscopic fatigue crack behaviour, International Journal of Fatigue, vol.5, issue.1, pp.3-14, 1983.

Y. Ochi, A. Ishii, and S. K. Sasaki, An experimental and statistical investigation of surface fatigue crack initiation and growth. Fatigue & fracture of engineering materials & structures, vol.8, pp.327-339, 1985.

L. Vincent, HDR, 2012.

R. O. Ritchie, Mechanisms of fatigue crack propagation in metals, ceramics and composites: role of crack tip shielding, Materials Science and Engineering: A, vol.103, issue.1, pp.15-28, 1988.

J. Sjöström and J. Bergström, Thermal fatigue in hot-working tools, Scandinavian Journal of Metallurgy, vol.34, issue.4, pp.221-231, 2005.

V. Mazánová, M. Heczko, and J. Polák, Fatigue crack initiation and growth in 43Fe-25Ni-22.5 Cr austenitic steel at a temperature of 700° C, International Journal of Fatigue, vol.114, pp.11-21, 2018.

R. Molins, G. Hochstetter, J. C. Chassaigne, and E. Andrieu, Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature, Acta Materialia, vol.45, issue.2, pp.663-674, 1997.

J. A. Duff and T. J. Marrow, In situ observation of short fatigue crack propagation in oxygenated water at elevated temperature and pressure, Corrosion Science, vol.68, pp.34-43, 2013.

H. D. Solomon and L. F. Coffin, Effects of frequency and environment on fatigue crack growth in A286 at 1100 F. In Fatigue at elevated temperatures, 1973.

J. L. Chaboche, A review of some plasticity and viscoplasticity constitutive theories, International journal of plasticity, vol.24, issue.10, pp.1642-1693, 2008.

A. Charbal, Mesure de champs thermomécaniques pour l'étude de la fatigue par chocs thermiques (Doctoral dissertation, 2017.

A. , R. Violan, P. Mendez, and J. , Low cycle fatigue behavior in vacuum of a 316L type austenitic stainless steel between 20 and 600°C Part I: Fatigue resistance and cyclic behavior, Materials Science and Engineering: A, vol.229, issue.1-2, pp.87-94, 1997.

G. Besnard, J. M. Lagrange, F. Hild, S. Roux, and C. Voltz, Characterization of necking phenomena in high-speed experiments by using a single camera, EURASIP Journal on Image and Video Processing, issue.1, p.215956, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00497354

A. Charbal, J. E. Dufour, F. Hild, M. Poncelet, L. Vincent et al., Hybrid stereocorrelation using infrared and visible light cameras, Experimental Mechanics, vol.56, issue.5, pp.845-860, 2016.
DOI : 10.1007/s11340-016-0127-4

URL : https://hal.archives-ouvertes.fr/hal-01335740

L. Piegl and W. Tiller, The NURBS book, 2012.