M. R. Stoudt and R. E. Ricker, The relationship between grain size and the surface roughening behavior of Al-Mg alloys, Metall. Mater. Trans. 33A, pp.2283-2889, 2002.

R. B. Alvarez, H. J. Martin, M. F. Horstemeyer, M. Q. Chandler, N. Williams et al., Corrosion relationships as a function of time and surface roughness on a structural AE44 magnesium alloy, Carros. Sei, vol.52, pp.1635-1648, 2010.

K. Sasaki and G. Burstein, The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential, Carros. Sei, vol.38, p.2111, 1996.

J. R. Davis, Corrosion of aluminum and aluminum alloys, 1999.

P. R. Ra, Corrosion Inspection and Monitoring, 2007.

A. L. Fontaine, H. Yen, P. Trimby, S. Moody, S. Miller et al., Martensitic transformation in an intergranular corrosion area of austenitic stainless steel during thermal cycling, Carros. Sei, vol.85, pp.1-6, 2014.

A. Stratulat, J. A. Duff, and T. J. Marrow, Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, Carros. Sei, vol.85, pp.428-435, 2014.

M. Dhondt, I. Aubert, N. Saintier, and J. M. Olive, Effects of microstructure and local mechanical fields on intergranular stress corrosion cracking of a friction stir welded aluminum-copper-Iithium 2050 nugget, Carros. Sei, vol.86, pp.123-130, 2014.

A. Egbewande, W. Chen, R. Eadie, R. Kania, G. V. Boven et al., Transgranular crack growth in the pipeline steels exposed ta near-neutral pH soit aqueous solutions: discontinuous crack growth mechanism, Carros. Sei, vol.83, pp.343-354, 2014.

M. M. Sharma, .. D. Tomedi, and J. M. Parks, A microscopie study on the corrosion fatigue of ultra-fine grained and conventional Al-Mg alloy, Carros. Sei, vol.93, pp.180-190, 2015.

X. Sun, B. Zhang, H. Lin, Y. Zhou, L. Sun et al., Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al-Zn-Mg alloy, Carros. Sei, vol.77, pp.103-112, 2013.

D. Spencer, M. Edwards, M. Wenman, C. Tsitsios, G. Scatigno et al., The initiation and propagation of chloride-induced transgranular stress-corrosion cracking (TGSCC) of 304L austenitic stainless steel under atmospheric conditions, Carros. Sei, vol.88, pp.76-88, 2014.

Y. Zhou and Y. Zuo, The intergranular corrosion of mild steel in C02 + NaN02 solution, Electrochim. Acta, vol.154, pp.157-165, 2015.

S. Tachibana, Y. Kuronuma, T. Yokota, K. Yamada, Y. Moriya et al., Effect of hot rolling and cooling conditions on intergranular corrosion behavior in alloy625 clad steel, Carros. Sei, vol.99, pp.125-133, 2015.

H. Li, P. Zhao, Q. Wang, B. Mao, R. Fang et al., The intergranular corrosion susceptibility of a heavily overaged Al-Mg-Si-Cu alloy, Carros. Sei, vol.107, pp.113-122, 2016.

J. Li, N. Birbilis, D. Liu, Y. Chen, X. Zhang et al., Intergranular corrosion of Zn-free and Zn-microalloyed Al-xCu-yLi alloys, Carros. Sei, vol.105, pp.44-57, 2016.

B. Gwinner, M. Auray, F. Balbaud-célérier, P. Fauvet, N. Larabi-gruet et al., Towards a reliable determination of the intergranular corrosion rate of austenitic stainless steel in oxidizing media, Carros. Sei, vol.107, pp.60-75, 2016.

F. Shi, P. Tian, N. Jia, Z. Ye, Y. Qi et al., Improving intergranular corrosion resistance in a nickel-free and manganese-bearing high-nitrogen austenitic stainless steel through grain boundary character distribution optimization, Carros. Sei, vol.107, pp.49-59, 2016.

P. Meakin, T. J0ssang, and J. Feder, Simple passivation and depassivation mode! for pitting corrosion, Phys. Rev. E, vol.48, issue.4, pp.2906-2916, 1993.

L. Balazs and J. F. Gouyet, Two-dimensional pitting corrosion of aluminium thin layers, Physica A, vol.217, issue.3-4, pp.319-338, 1995.

L. Li, X. Li, C. Dong, and Y. Huang, Computational simulation of metastable pitting of stainless steel, Electrochim. Acta, vol.54, issue.26, pp.6389-6395, 2009.

D. Di-ca-pria, C. Vautrin-ul, J. Stafiej, J. Saunier, A. Chaussé et al., Morphology of corroded surfaces: contribution of cellular automaton modelling, Carros. Sei, vol.53, issue.1, pp.418-425, 2011.

D. Di-caprio and J. Stafiej, Simulations of passivation phenomena based on discrete lattice gas automata, Electrochim. Acta, vol.55, issue.12, pp.3884-3890, 2010.

D. Di-caprio and J. Stafiej, The raie of adsorption in passivation phenomena modelled by discrete lattice gas automata, Electrochim. Acta, vol.56, issue.11, pp.3963-3968, 2011.

D. Bartosik, J. Di-caprio, and . Stafiej, Cellular automata approach ta corrosion and passivity phenomena, Pure Appl. Chem, vol.85, issue.1, pp.247-256, 2012.

K. Lan, Y. Chen, T. Hung, H. Tung, and G. Yu, Simulation of the growth of oxide layer of stainless steels with chromium using cellular automaton mode!: verification and parameter study, Comput. Mater. Sei, vol.77, pp.139-144, 2013.

H. Wang and E. Han, Simulation of metastable corrosion pit development under mechanical stress, Electrochim. Acta, vol.90, pp.128-134, 2013.

P. Van-der-weeën, A. M. Zimer, E. C. Pereira, L. H. Mascara, O. M. Bruno et al., Modeling pitting corrosion by means of a 3D discrete stochastic mode!, Carros. Sei, vol.82, pp.133-144, 2014.

C. F. Pérez-brokate, D. Di-ca-pria, D. Féron, J. De-lamare, and A. Chaussé, Overview of cellular automaton models for corrosion, Lect. Notes Comput. Sei, vol.8751, pp.187-196, 2014.

H. Wang and E. Han, Computational simulation of corrosion pit interactions under mechanochemical effects using a cellular automaton/finite element mode!, Carros. Sei, vol.103, pp.305-311, 2016.

C. F. Pérez-brokate, D. Di-ca-pria, D. Féron, J. De-lamare, and A. Chaussé, Three dimensional discrete stochastic mode! of occluded corrosion cell, Carros. Sei, 2016.

A. Taleb and J. Stafiej, Numerical simulation of the effect of grain size on corrosion processes: surface roughness oscillation and cluster detachment, Carros. Sei, vol.53, pp.2508-2513, 2011.

S. Lishchuk, R. Akid, K. Worden, and J. Michalski, A cellular automaton mode! for predicting intergranular corrosion, Carros. Sei, vol.53, issue.8, pp.2518-2526, 2011.
DOI : 10.1016/j.corsci.2011.04.027

T. Igarashi, A. Komatsu, T. Motooka, F. Ueno, Y. Kaji et al., Simulations of intergranular corrosion feature for stainless steel using cellular automata method, Zairyo ta Kankyo (Carros. Eng.Jpn.), vol.63, issue.7, pp.431-437, 2014.
DOI : 10.3323/jcorr.63.431
URL : https://www.jstage.jst.go.jp/article/jcorr/63/7/63_431/_pdf

F. Ueno, A. Komatsu, T. Igarashi, and M. Yamamoto, Study on the effect of phosphorous concentration on intergranular corrosion of stainless steel in boiling nitric acid solution, 2014.

T. Igarashi, A. Komatsu, T. Motooka, F. Ueno, and M. Yamamoto, Three dimensional computational modelling and simulation of intergranular corrosion propagation of stainless steel, pp.1-7, 2014.

M. Guérin, J. Alexis, E. Andrieu, L. Laffont, W. Lefebvre et al., Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy, Corros. Sei, vol.102, pp.291-300, 2016.

C. Vautrin-ul, A. Taleb, J. Stafiej, A. Chaussé, and J. Badiali, Mesoscopic modelling of corrosion phenomena: coupling between electrochemical and mechanical pro cesses, analysis of the deviation from the faraday law, Electrochim. Acta, vol.52, pp.5368-5376, 2007.

H. Grabke, Grain boundary segregation of impurities in iron and steels and effects on steel properties, Impurities in Engineering Materials, pp.143-192, 1999.

C. Briant, The effect of grain boundary segregation on intergranular failures, Impurities in Engineering Materials, pp.193-224, 1999.

C. Vargel and B. Chapter, 2-types of corrosion on aluminium, Corrosion of Aluminium, pp.113-146, 2004.

J. K. Kim, Y. H. Kim, J. , S. Lee, and K. Y. Kim, Effect ofchromium content on intergranular corrosion and precipitation ofTi-stabilized fe rritic stainless steels, Corros. Sei, vol.52, issue.5, pp.1847-1852, 2010.
DOI : 10.1016/j.corsci.2010.01.037

X. Li, Y. He, .. Yu, and P. Zhang, Evaluation of the effect of grain size on chromium carbide precipitation and intergranular corrosion of316L stainless steel, Corros. Sei, vol.66, pp.211-216, 2013.

B. S. Kumar, B. S. Prasad, V. Kain, and J. Reddy, Methods for making alloy 600 resistant to sensitization and intergranular corrosion, Corros. Sei, vol.70, pp.55-61, 2013.

P. Lejcek, Grain Boundary Segregation in Metals Springer Series in Materials Science, vol.136, 2010.

, Investigation of the sensitization and intergranular corrosion of tube-to-tubesheet welds of hyper duplex stainless steel using an electrochemical reactivation method, Corros. Sei, vol.87, pp.60-70, 2014.

, Effect of Ce addition on the precipitation of deleterious phases and the associated intergranular corrosion resistance of27Cr-7Ni hyper duplex stainless steels, Corros. Sei, vol.90, pp.313-322, 2015.

P. and C. , Aciers inoxydables critères de choix et structure, Techniques de l'ingénieur: Aciers inoxydables, aciers réfractaires et aciers résistant au fluage M4540, pp.1-17, 2000.

M. P. Seah, Grain boundary segregation, J. Phys. F: Met. Phys, vol.10, issue.6, p.1043, 1980.

F. Christien, R. L. Gall, and G. Saindrenan, Phosphorus grain boundary segregation in steel 17-4 PH, Ser. Mater, vol.48, issue.1, pp.301-306, 2003.

M. Lucas, J. Stafiej, C. Slim, S. Delpech, and D. Di-caprio, Cellular automata modeling of scanning electrochemical microscopy (SECM) experiments, Electrochim. Acta, vol.145, pp.314-318, 2014.
URL : https://hal.archives-ouvertes.fr/in2p3-01101713

C. F. Pérez-brokate, D. Di-caprio, E. Mahé, D. Féron, and J. De-lamare, Cyclic voltammetry simulations with cellular automata, J. Comput. Sei, vol.11, pp.269-278, 2015.

S. H. Whang, Nanostructured Metals and Alloys, 2011.

W. Tian, S. Li, X. Chen, J. Liu, and M. Yu, Intergranular corrosion of spark plasma sintering assembled bimodal grain sized M7075 aluminum alloys, Corros. Sei, vol.107, pp.211-224, 2016.

Y. Goueffon, L. Arurault, C. Mabru, C. Tonon, and P. Guigue, Black anodic coatings for space applications: study of the process parameters, characteristics and mechanical properties, J. Mater. Process. Technol, vol.209, pp.5145-5151, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01851871

L. Beaunier, M. Froment, and C. Vignaud, A kinetical mode! for the electrochemical grooving of grain boundaries, Electrochim. Acta, vol.25, issue.10, pp.1239-1246, 1980.

V. Bague, S. Chachoua, Q. T. Tran, and P. Fauvet, Determination of the long-term intergranular corrosion rate of stainless steel in concentrated nitric acid, J. Nucl. Mater, vol.392, pp.396-404, 2009.