A. Schulz, Combustor liner cooling technology in scope of reduced pollutant formation and rising thermal efficiencies, Ann. N. Y. Acad. Sci, vol.934, issue.1, pp.135-146, 2001.

N. Rizk and H. Mongia, Low NOx rich-lean combustion concept application, 1991.

R. J. Goldstein, Film cooling, Adv. Heat Tran, vol.7, pp.321-379, 1971.

A. H. Lefebvre, Gas Turbines Combustion, 1999.

R. Poprawe, I. Kelbassa, K. Walther, M. Witty, D. Bohn et al., Optimising and manufacturing a laser-drilled cooling hole geometry for effusion-cooled multi-layer plates, Proc. of ISROMAC, vol.12, 2008.

R. E. Mayle and F. J. Camarata, Multihole cooling effectiveness and heat transfer, J. Heat Transf, vol.97, pp.534-538, 1975.

J. R. Pietrzyk, D. G. Bogard, and M. E. Crawford, Hydrodynamic measurements of jets in crossflow for gas turbine film cooling applications, J. Turbomach, vol.111, pp.139-145, 1989.

A. K. Sinha, D. G. Bogard, and M. E. Crawford, Film-cooling effectiveness downstream of a single row of holes with variable density ratio, J. Turbomach, vol.113, pp.442-449, 1991.

M. E. Crawford, W. M. Kays, and R. J. Moffat, Full-coverage film cooling. part I: comparison of heat transfer data for three injection angles, J. Eng. Gas Turbines Power, vol.102, pp.1000-1005, 1980.

C. A. Hale, M. W. Plesniak, and S. Ramadhyani, Film cooling effectiveness for short film cooling holes fed by a narrow plenum, J. Turbomach, vol.122, pp.553-557, 2000.

P. V. Lebrocq, B. E. Launder, and C. H. Priddin, Discrete hole injection as a means of transpiration cooling; an experimental study, Proc. Inst. Mech. Eng, vol.187, issue.17, pp.149-157, 1973.

D. E. Metzger, D. I. Takeuchi, and P. A. Kuenstler, Effectiveness and heat transfer with full-coverage filmcooling, 1973.

A. M. Briones, B. A. Rankin, S. D. Stouffer, T. J. Erdmann, and D. L. Burrus, Parallelized, automated, and predictive imprint cooling model for combustion systems, J. Eng. Gas Turbines Power, vol.139, issue.3, p.31505, 2017.

A. Burdet, R. S. Abhari, and M. G. Rose, Modeling of film cooling-Part II model for use in threedimensional computational fluid dynamics, J. Turbomach, vol.129, issue.2, pp.221-231, 2007.

L. Mazzei, L. Mazzei, A. Andreini, A. Andreini, B. Facchini et al., Assessment of modelling strategies for film cooling, Int. J. Numer. Methods Heat Fluid Flow, vol.27, issue.5, pp.1118-1127, 2017.

S. Mendez and F. Nicoud, Adiabatic homogeneous model for flow around a multiperforated plate, AIAA J, vol.46, issue.10, pp.2623-2633, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00820458

S. Rida, R. Reynolds, S. Chakracorty, and K. Gupta, Imprinted effusion modeling and dynamic cd calculation in gas turbine combustors, ASME Paper, pp.2012-68804, 2012.

S. Voigt, B. Noll, and M. Aigner, Development of a macroscopic CFD model for effusion cooling applications, ASME Paper, pp.2012-68251, 2012.

S. Mendez and F. Nicoud, Large-eddy simulation of a bi-periodic turbulent flow with effusion, J. Fluid Mech, vol.598, pp.27-65, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00820464

A. Most, N. Savary, and C. Bérat, Reactive flow modelling of a combustion chamber with a multiperforated liner, pp.2007-5003, 2007.

D. Lahbib, Modélisation Aérodynamique et Thermique des Multiperforations en LES, 2015.

C. Koupper, L. Gicquel, F. Duchaine, and G. Bonneau, Advanced combustor exit plane temperature diagnostics based on large eddy simulations, Flow Turbul. Combust, vol.95, issue.1, pp.79-96, 2015.

F. Jaegle, O. Cabrit, S. Mendez, and T. Poinsot, Implementation methods of wall functions in cell-vertex numerical solvers, Flow Turbul. Combust, vol.85, issue.2, pp.245-272, 2010.

P. Miron, ´ Etude Expérimentale des Lois de Parois et du Film de Refroidissement Produit par une Zone Multiperforée sur une Paroi Plane, 2005.

J. Florenciano and P. Bruel, LES fluid-solid coupled calculations for the assessment of heat transfer coefficient correlations over multi-perforated walls, Aerosp. Sci. Technol, vol.53, pp.61-73, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01353952

J. Florenciano, Etude de la Réponse d'unÉcoulementun´unÉcoulement Avec Transfert Pariétal de Massè a un Forçage Acoustique, 2013.

B. Petre, E. Dorignac, and J. J. Vullierme, Study of the influence of the number of holes rows on the convective heat transfer in the case of full coverage film cooling, Int. J. Heat Mass Transf, vol.46, issue.18, pp.3477-3496, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00131180

J. Lamouroux, S. Richard, Q. Malé, G. Staffelbach, A. Dauptain et al., On the combination of large eddy simulation and phenomenological soot modelling to calculate the smoke index from aero-engines over a large range of operating conditions, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, pp.4-04, 2017.

M. Thomas, A. Dauptain, L. Gicquel, F. Duchaine, C. Koupper et al., Comparison of heterogeneous and homogeneous coolant injection models for large eddy simulation of multiperforated liners present in a combustion simulator, ASME Paper, pp.2017-64622, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02050150

G. Vignat, G. Taliercio, J. Lamouroux, S. Da-veiga, N. Savary et al., Analysis of performance sensitivity to geometrical variations of a modern helicopter engine combustor using les simulations, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, pp.4-04, 2017.