, ABNT/CB-02-Comitê Brasileiro de Construção Civil. Desempenho térmico de edificações Parte 1: Definições, símbolos e unidades, p.19, 2003.

. Abrava and . Brazilian, Association of Refrigeration, Air Conditioning, Ventilation and Heating, 2019.

S. A. Al-sanea and M. F. Zedan, Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions, Applied Energy, vol.98, pp.584-593, 2012.

S. A. Al-sanea, M. F. Zedan, and S. A. Al-ajlan, Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model, Applied Energy, vol.82, issue.4, pp.313-330, 2005.

. Ashrae and . Chapter, Heat, Air, and Moisture Control in Building Assemblies -Material Properties, p.19, 2013.

N. Aste, A. Angelotti, and M. Buzzetti, The influence of the external walls thermal inertia on the energy performance of well insulated buildings, Energy and Buildings, vol.41, issue.11, pp.1181-1187, 2004.

I. Axaopoulos, P. Axaopoulos, and J. Gelegenis, Optimum insulation thickness for external walls on different orientations considering the speed and direction of the wind, Applied Energy, vol.117, p.24, 2005.

J. Berger and N. Mendes, An innovative method for the design of high energy performance building envelopes, Applied Energy, vol.190, p.27, 2005.

J. G. Blom and P. A. Zegeling, Algorithm 731; a moving-grid interface for systems of one-dimensional time-dependent partial differential equations, ACM Transactions on Mathematical Software, vol.20, issue.2, p.7, 1994.

G. Branco, B. Lachal, P. Gallinelli, and W. Weber, Predicted versus observed heat consumption of a low energy multifamily complex in Switzerland based on long-term experimental data, Energy and Buildings, vol.36, issue.6, pp.543-555, 2004.

G. Capizzi, G. L. Sciuto, G. Cammarata, and M. Cammarata, Thermal transients simulations of a building by a dynamic model based on thermal-electrical analogy: Evaluation and implementation issue, Applied Energy, vol.199, pp.323-334, 2004.

N. Daouas, A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads, Applied Energy, vol.88, issue.1, pp.156-164, 2005.

N. Daouas, Impact of external longwave radiation on optimum insulation thickness in Tunisian building roofs based on a dynamic analytical model, Applied Energy, vol.177, pp.136-148, 2005.

T. A. Driscoll, N. Hale, and L. N. Trefethen, , p.11, 2014.

B. B. Ekici, A. A. Gulten, and U. T. Aksoy, A study on the optimum insulation thicknesses of various types of external walls with respect to different materials, fuels and climate zones in Turkey, Applied Energy, vol.92, pp.211-217, 2004.

F. C. Filho, Brazilian Energy Balance, Ministry of Mines and Energy -MME, 2017.

G. Fraisse, C. Viardot, O. Lafabrie, and G. Achard, Development of a simplified and accurate building model based on electrical analogy, Energy and Buildings, vol.34, issue.10, pp.1017-1031, 2002.

S. Gasparin, J. Berger, D. Dutykh, and N. Mendes, Stable explicit schemes for simulation of nonlinear moisture transfer in porous materials, J. Building Perf. Simul, vol.11, issue.2, p.11, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01404578

A. Ioannou and L. C. Itard, Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy, Energy and Buildings, vol.92, pp.216-233, 2004.

M. Nematchoua, P. Ricciardi, S. Reiter, and A. Yvon, A comparative study on optimum insulation thickness of walls and energy savings in equatorial and tropical climate, International Journal of Sustainable Built Environment, vol.6, issue.1, p.5, 2017.

G. Khakimzyanov and D. Dutykh, On supraconvergence phenomenon for second order centered finite differences on non-uniform grids, J. Comp. Appl. Math, vol.326, p.10, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01223522

G. S. Khakimzyanov, D. Dutykh, D. E. Mitsotakis, and N. Y. Shokina, Numerical solution of conservation laws on moving grids, vol.10, p.11, 2009.

Y. Kim, M. Heidarinejad, M. Dahlhausen, and J. Srebric, Building energy model calibration with schedules derived from electricity use data, Applied Energy, vol.190, pp.997-1007, 2004.

K. J. Kontoleon and C. Giarma, Dynamic thermal response of building material layers in aspect of their moisture content, Applied Energy, vol.170, pp.76-91, 2004.

K. J. Kontoleon, T. G. Theodosiou, and K. G. Tsikaloudaki, The influence of concrete density and conductivity on walls' thermal inertia parameters under a variety of masonry and insulation placements, Applied Energy, vol.112, issue.4, pp.325-337, 2013.

M. Kumar-kumaran, International Energy Agency energy conservation in buildings and community systems programme Heat, air and moisture transfer through new and retrofitted insulated envelope parts

, Annex 24 Task 3/Final report: Material properties, vol.19, p.20, 1996.

. Matlab, , p.11, 2017.

A. P. Melo, M. J. Sorgato, and R. Lamberts, Building energy performance assessment: Comparison between ASHRAE standard 90.1 and Brazilian regulation, Energy and Buildings, vol.70, pp.372-383, 1920.

N. Mendes, R. M. Barbosa, R. Z. Freire, and R. C. Oliveira, A simulation environment for performance analysis of HVAC systems, Building Simulation, vol.1, issue.2, p.26, 1920.

N. Mendes, M. Chhay, J. Berger, and D. Dutykh, Numerical methods for diffusion phenomena in building physics, PUCPRess, issue.4, 2017.

C. Morishita, J. Berger, A. Carneiro, and N. Mendes, Issues about moisture in residential buildings of Brazil, WBC16 Proceedings: Volume I, Creating Built Environments of New Opportunities, vol.4, p.19, 2016.

G. Mustafaraj, D. Marini, A. Costa, and M. Keane, Model calibration for building energy efficiency simulation, Applied Energy, vol.130, pp.72-85, 2004.

I. Naveros and C. Ghiaus, Order selection of thermal models by frequency analysis of measurements for building energy efficiency estimation, Applied Energy, vol.139, pp.230-244, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01289390

M. Ozel, Effect of wall orientation on the optimum insulation thickness by using a dynamic method, Applied Energy, vol.88, issue.7, pp.2429-2435, 2005.

A. Reilly and O. Kinnane, The impact of thermal mass on building energy consumption, Applied Energy, vol.198, pp.108-121, 2004.

S. Roels, P. Bacher, G. Bauwens, S. Castaño, M. J. Jiménez et al., On site characterisation of the overall heat loss coefficient: Comparison of different assessment methods by a blind validation exercise on a round robin test box, Energy and Buildings, vol.153, pp.179-189, 2004.

J. M. Stockie, J. A. Mackenzie, and R. D. Russell, A Moving Mesh Method for Onedimensional Hyperbolic Conservation Laws, SIAM J. Sci. Comput, vol.22, issue.5, pp.1791-1813, 2001.

R. A. Taylor and M. Miner, A metric for characterizing the effectiveness of thermal mass in building materials, Applied Energy, vol.128, pp.156-163, 2004.

S. K. Wang, Handbook of Air Conditioning and Refrigeration, p.27, 2000.

Z. Yang and B. Becerik-gerber, A model calibration framework for simultaneous multi-level building energy simulation, Applied Energy, vol.149, pp.415-431, 2004.

J. Yuan, V. Nian, B. Su, and Q. Meng, A simultaneous calibration and parameter ranking method for building energy models, Applied Energy, vol.206, pp.657-666, 2004.

S. Gasparin, Rua Imaculada Conceição, vol.1155, pp.80215-901

D. Dutykh, , p.73000

F. Chambéry, L. Cnrs, U. Savoie-mont, and . Blanc, E-mail address: Denys.Dutykh@univ-smb, Nathan.Mendes@pucpr.edu.br URL, pp.80215-901