F. T. Lynch and A. Khodadoust, Effects of ice accretion on aircraft aerodynamics, Prog. Aero. Sci, vol.37, pp.669-767, 2001.

, Federal Aviation Administration, Advisory Circular No 91-74B: Flight in Icing Conditions, 2015.

R. Ramachandran, M. Kozhukhova, K. Sobolev, and M. Nosonovsky, Anti-icing superhydrophobic surfaces: controlling entropic molecular interactions to design novel icephobic concrete, Entropy, vol.18, pp.132-158, 2016.

S. R. Corsi, S. W. Geis, J. E. Loyo-rosales, C. P. Rice, R. J. Sheesley et al., Characterization of aircraft deicer and anti-icer components and toxicity in airport snowbanks and snowmelt runoff, Environ. Sci. Technol, vol.40, pp.3195-3202, 2006.

A. I. Freeman, B. W. Surridge, M. Matthews, and M. Steward, Understanding and managing de-icer contamination of airport surface waters: a synthesis and future perspectives, Environ. Technol. Innov, vol.3, pp.46-62, 2015.

A. J. Meuler, G. H. Mckinley, and R. E. Cohen, Exploiting topographical texture to impart icephobicity, ACS Nano, vol.4, issue.2, pp.7048-7052, 2010.

R. Smith-johannsen, Surface having low adhesion to ice, vol.269, 1952.

C. Zhang and H. Liu, Effect of drop size on the impact thermodynamics for supercooled large droplet in aircraft icing, Phys. Fluids, vol.28, p.62107, 2016.

Y. Lian and Y. Guo, Investigation of the Splashing Phenomenon of Large Droplets for Aviation Safety, 2015.

O. Parent and A. Ilinca, Anti-icing and de-icing techniques for wind turbines: critical Review, Cold Reg. Sci. Technol, vol.65, pp.88-96, 2011.

A. Amendola and G. Mingione, On the problem of icing for modern civil aircraft, Air Space Eur, vol.3, pp.214-217, 2001.

A. G. Kraj and E. L. Bibeau, Phases of icing on wind turbine blades characterized by ice accumulation, Renew. Energy, vol.35, pp.966-972, 2010.

G. Mingione, M. Barocco, E. Denti, and F. G. Bindi, Flight in Icing Conditions, Directorate General for Civil Aviation, 2008.

, Aircraft deicing and anti-icing equipment, pp.1-8

H. Sojoudi, M. Wang, N. D. Boscher, G. H. Mckinley, and K. K. Gleason, Durable and scalable icephobic surfaces: similarity and distinctions from superhydrophobic surfaces, Soft Matter, vol.12, pp.1938-1963, 2016.
DOI : 10.1039/c5sm02295a
URL : https://pubs.rsc.org/en/content/articlepdf/2016/sm/c5sm02295a

S. Nishimoto and B. Bhushan, Bioinspired self-cleaning surfaces with superhydrophobicity, superoleophobicity and superhydrophilicity, RSC Adv, vol.3, pp.671-691, 2013.
DOI : 10.1039/c2ra21260a

K. K. Varanasi, T. Deng, M. F. Hsu, and N. Bhate, Design of superhydrophobic surfaces for optimum roll-off and droplet impact resistance, Proceedings of the ASME International Mechanical Engineering Congress and Exposition IMECE2008, 2008.

K. Varanasi, T. Deng, J. D. Smith, M. Hsu, and N. , Bhate, frost formation and ice adhesion on superhydrophobic surfaces, Appl. Phys. Lett, vol.97, pp.1-3, 2010.
DOI : 10.1063/1.3524513

A. H. Stone, Ice-phobic surfaces that are wet, ACS Nano, vol.6, issue.8, pp.6536-6539, 2012.
DOI : 10.1021/nn303372q

L. Makkonen, Ice adhesion-theory, measurements and countermeasures, J. Adhes. Sci. Technol, vol.26, pp.413-445, 2012.

G. Fortin, Super-Hydrophobic Coatings as a Part of the Aircraft Ice Protection System, 2017.

Y. H. Yeong, J. Sokhey, and E. Loth, Ice adhesion on superhydrophobic coatings in an icing wind tunnel, Advances in Polymer Science, 2017.
DOI : 10.1007/12_2017_32

S. A. Kulinich and M. Farzaneh, On ice-releasing properties of rough hydrophobic coatings, Cold Reg. Sci. Technol, vol.65, pp.60-64, 2011.

S. A. Kulinich, S. Farhadi, K. Nose, and X. W. Du, Superhydrophobic surfaces: are they really ice-repellent, Langmuir Lett, vol.27, issue.1, pp.25-29, 2011.
DOI : 10.1021/la104277q

M. Susoff, K. Siegmann, C. Pfaffenroth, and M. Hirayama, Evaluation of icephobic coatings-screening of different coatings and influence of roughness, Appl. Surf. Sci, vol.282, pp.870-879, 2013.

J. Chen, J. Liu, M. He, K. Li, D. Cui et al., Superhydrophobic surfaces cannot reduce ice adhesion, Appl. Phys. Lett, vol.101, p.111603, 2012.
DOI : 10.1063/1.4752436

R. J. Scavuzzo and M. L. Chu, Structural Properties of Impact Ices Accreted on Aircraft Structures, 1987.

G. Momen, R. Jafari, and M. Farzaneh, Ice repellency behaviour of superhydrophobic surfaces: effects of atmospheric icing conditions and surface roughness, Appl. Surf. Sci, vol.349, pp.211-281, 2015.

V. Hejazi, K. Sobolev, and M. Nosonovsky, From superhydrophobicity to icephobicity: forces and interaction analysis, Sci. Rep, vol.3, issue.1-6, p.2194, 2013.

M. Nosonovsky and V. Hejazi, Why superhydrophobic surface are not always icephobic?, ACS Nano, vol.6, pp.8488-8491, 2012.

S. Farhadi, M. Farzaneh, and S. A. Kulinich, Anti-icing performance of superhydrophobic surfaces, Appl. Surf. Sci, vol.257, pp.6264-6269, 2011.

A. J. Meuler, J. D. Smith, K. K. Varanasi, J. Mabry, G. H. Mckinley et al., Relationships between water wettability and ice adhesion, ACS Appl. Mater. Interfaces, vol.2, issue.3100, pp.1-10, 2010.

A. Dotan, H. Dodiuk, C. Laforte, and S. Kenig, The relationship between water wetting and ice adhesion, J. Adhes. Sci. Technol, vol.23, pp.1907-1915, 2009.

S. T. Wong, S. H. Kang, S. K. Tang, E. J. Smythe, B. J. Hatton et al., Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity, Nature, vol.477, pp.443-447, 2011.

I. A. Ryzhkin and V. F. Petrenko, Physical mechanisms responsible for ice adhesion, J. Phys. Chem, vol.101, pp.6267-6270, 1997.

N. Saleema, M. Farzaneh, R. W. Paynter, and D. K. Sarkar, Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties, J. Adhes. Sci. Technol, vol.25, pp.27-40, 2011.

K. Jha, E. Animo-danso, S. Bekele, G. Eason, and M. Tsige, On modulating interfacial structure towards improved anti-icing performance, Coatings, vol.6, issue.3, pp.1-22, 2016.

V. F. Petrenko and S. Peng, Reduction of ice adhesion to metal by using self-assembling monolayers (SAMs), Can. J. Phys, vol.81, pp.387-393, 2003.

K. Golovin, S. P. Kobaku, D. H. Lee, E. T. Diloreto, J. M. Mabry et al., Designing durable icephobic surfaces, Adv. Sci, vol.2, pp.1-12, 2016.

A. Work and Y. Lian, A critical review of the measurement of ice adhesion to solid substrates, Prog. Aero. Sci, vol.98, pp.1-26, 2018.

P. Kim, T. S. Wong, J. Alvarenga, M. J. Kreder, and W. E. Adorno-martinez, Liquid-infused nano-structured surfaces with extreme anti-icing and anti-frosting performance, J. Aizenberg, vol.6, issue.8, pp.6569-6577, 2012.

S. Yang, Q. Xia, L. Zhu, J. Xue, Q. Wang et al., Research on the icephobic properties of fluoropolymer-based materials, Appl. Surf. Sci, vol.257, pp.4956-4962, 2011.

C. Peng, S. Xiang, Z. Yuan, J. Xiao, C. Wang et al., Preparation and anti-icing of superhydrophobic PVDF coating on a wind turbine blade, Appl. Surf. Sci, vol.259, pp.764-768, 2012.

S. Wang, Y. L. , M. Sun, C. Zhang, Q. Yang et al., Preparation of a durable superhydrophobic membrane by electrospinning poly(vinylidene fluoride) (PVDF) mixed with epoxy-siloxane modified SiO2 nanoparticles, J. Colloid Interface Sci, vol.359, issue.2, pp.380-388, 2011.

B. B. Basu and A. K. Paranthaman, A simple method for the preparation of superhydrophobic PVDF-HMFS hybrid composite coatings, Appl. Surf. Sci, vol.255, pp.4479-4483, 2009.

D. Zha, S. Mei, Z. Wang, H. Li, Z. Shi et al., Superhydrophobic polyvinylidene fluoride/graphene porous materials, Carbon, vol.49, pp.5166-5172, 2011.

M. Zou, S. Beckford, R. C. Wei, G. Hatton, and M. A. Miller, Effects of surface roughness and energy on ice adhesion strength, Appl. Surf. Sci, vol.257, pp.3786-3792, 2011.

H. Li, X. Li, C. Luo, Y. Zhao, and X. Yuan, Icephobicity of polydimethylsiloxane-b-poly, vol.573, pp.67-73, 2014.

X. Li, Y. Zhao, H. Li, and X. Yuan, Preparation and icephobic properties of polymehyltrifluoropropylsiloxane-polyacrylate block copolymers, Appl. Surf. Sci, vol.316, pp.222-231, 2014.

J. A. Zigmond, K. A. Pollack, S. Smedley, J. E. Raymond, L. A. Link et al., Investigation of intricate, amphiphilic crosslinked hyperbranched fluoropolymers as anti-icing coatings for extreme environment, J. Polym. Sci., Part A, vol.54, pp.238-244, 2016.

S. A. Kulinich and M. Farzaneh, Ice adhesion on super-hydrophobic surfaces, Appl. Surf. Sci, vol.255, pp.8153-8157, 2009.

P. F. Rios, H. Dodiuk, S. Kenig, S. Mccarty, and A. Dotan, The effects of nanostructure and composition on the hydrophobic properties of solid surfaces, J. Adhes. Sci. Technol, vol.20, issue.6, pp.563-587, 2006.

L. F. Mobarakeh, R. Jafari, and M. Farzaneh, The ice repellency of plasma polymerized hexamethyldisiloxane coating, Appl. Surf. Sci, pp.459-463, 2013.

M. Hirayam, Activated poly(hydromethylsiloxane) as novel adhesion promoters for metallic surfaces, J. Adhes, vol.72, issue.1, pp.51-63, 2000.

M. E. Yazdanshenas and K. Shateri-khalilabad, One-step synthesis of superhydrophobic coating on cotton fabric by ultrasonic irradiation, Ind. Eng. Chem. Res, vol.52, pp.12846-12854, 2013.

J. Li, Y. Zhao, J. Hu, L. Shu, and X. Shi, Anti-icing performance of a superhydrophobic PDMS/modified nano-silica hybrid coating for insulations, J. Adhes. Sci. Technol, vol.26, pp.665-679, 2012.

L. Cao, A. K. Jones, V. K. Sikka, J. Wu, and D. Gao, Anti-icing superhydrophobic coatings, Langmuir, vol.25, issue.21, pp.12444-12448, 2009.

A. G. Dyachenko, M. V. Borysenko, and S. V. Pakhovchyshyn, Hydrophilic/hydrophobic properties of silica surfaces modified with metal oxides and polydimethylsiloxane, Adsorpt. Sci. Technol, vol.22, issue.6, pp.511-516, 2004.

D. Ebert and B. Bhushan, Transparent, superhydrophobic, and wear-resistant coatings on glass and polymer substrates using SiO2, ZnO, and ITO nanoparticles, vol.28, pp.11391-11399, 2012.

A. Corp,

L. B. Boinovich and A. M. Emelyanenko, Anti-icing potential of superhydrophobic coatings, Mendeleev Commun, vol.23, pp.3-10, 2013.

C. Laforte, C. Blackburn, J. Perron, and R. J. Aubert, Icephobic coating evaluation for aerospace applications, 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2014.

J. Palacios, D. Wolfe, M. Bailey, and J. Szefi, Ice testing of a centrifugally powered pneumatic deicing system for helicopter rotor blades, J. Am. Helicopter Soc, vol.60, pp.1-12, 2015.

J. Soltis, J. Palacios, T. Eden, and D. Wolfe, Ice adhesion mechanisms of erosion-resistant coatings, AIAA J, vol.53, pp.654-662, 2015.

S. Jung, M. Dorrestijn, D. Raps, A. Das, C. M. Megaridis et al., Are superhydrophobic surfaces best for icephobicity, Langmuir, vol.27, pp.3059-3066, 2011.

G. Barati-darband, M. Aliofkhazraei, S. Khorsand, S. Sokhanvar, and A. Kaboli, Science and engineering of superhydrophobic surfaces: review of corrosion resistance, chemical and mechanical stability, Arab. J. Chem, 2018.

D. Spitzner, T. Bergmann, S. Apelt, A. Boucher, and H. Wiesmann, Reversible switching of icing properties on pyroelectric polyvenylidene fluoride thin film coatings, Coatings, vol.5, pp.724-736, 2015.

B. G. Park, W. Lee, J. S. Kim, and K. B. Lee, Superhydrophobic fabrication of anodic aluminum oxide with durable and pitch controlled nanostructure, Colloid. Surface. Physicochem. Eng. Aspect, vol.370, pp.15-19, 2010.

H. Leese, V. Bhurtun, K. P. Lee, and D. Mattia, Wetting behaviour of hydrophilic and X. Huang et al. hydrophobic nanostructured porous anodic alumina, Colloid. Surface. Physicochem. Eng. Aspect, vol.420, pp.53-58, 2013.

X. Zhang, M. Chen, and M. Fu, Impact of surface nanostructure on ice nucleation, J. Chem. Phys, vol.141, p.124709, 2014.

D. Cerro, G. R. Romer, and A. J. , Huis in't Veld, Erosion resistant antiicing surfaces generated by ultra short laser pulses, Phys. Procedia, vol.5, pp.231-235, 2010.

A. Steele, B. K. Nayak, A. Davis, M. C. Gupta, and E. Loth, Linear abrasion of a titanium superhydrophobic surface prepared by ultrafast laser microtexturing, J. Micromech. Microeng, vol.23, pp.1-8, 2013.

D. Ebert and B. Bhushan, Durable lotus-effect surfaces with hierarchical structure using micro-and nano-sized hydrophobic silica particles, J. Colloid Interface Sci, vol.368, pp.584-591, 2012.

X. Chen, R. Ma, H. Zhou, X. Zhou, L. Che et al., Activating the microscale edge effect in a hierarchical surface for frosting suppression and defrosting promotion, Sci. Rep, vol.3, pp.2525-2532, 2013.

P. Eberle, M. K. Tiwari, T. Maitra, and D. Poulikakos, Rational nanostructuring of surfaces for extraordinary icephobicity, Nanoscale, vol.6, pp.4874-4881, 2014.

T. M. Schutzius, S. Jung, T. Maitra, P. Eberle, C. Antonini et al., Physics of icing and rational design of surfaces with extraordinary icephobicity, Langmuir, vol.31, pp.4807-4821, 2015.

P. W. Wilson, W. Lu, H. Xu, P. Kim, M. J. Kreder et al., Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS), Phys. Chem. Chem. Phys, vol.15, issue.2, pp.581-585, 2013.

Y. L. Zhang, H. Xia, E. Kim, and H. Sun, Recent developments in superhydrophobic surfaces with unique structural and functional properties, Soft Matter, vol.8, pp.11217-11231, 2012.

Q. Liu, Y. Yang, M. Huang, Y. Zhou, Y. Liu et al., Durability of a lubricantinfused electrospray silicon rubber surface as an anti-icing coating, Appl. Surf. Sci, vol.346, pp.68-76, 2015.

L. Zhu, J. Xue, Y. Wang, Q. Chen, J. Ding et al., Ice-phobic coatings based on silicon-oil-infused polydimethylsiloxane, ACS Appl. Mater. Interfaces, vol.5, issue.10, pp.4053-4062, 2013.

Y. H. Yeong, C. Wang, K. J. Wynne, and M. C. Gupta, Oil-infused superhydrophobic silicone material for low ice adhesion with long-term infusion stability, ACS Appl. Mater. Interfaces, vol.8, pp.32050-32059, 2016.

X. Sun, V. G. Damle, S. Liu, and K. Rykaczewski, Bioinspired stimuli-responsive and antifreeze-secreting anti-icing coatings, Adv. Mater. Interfaces, vol.2, p.1400479, 2015.

S. L. Sivas, B. Riegler, R. Thomaier, and K. Hoover, A silicone-based ice-phobic coating for aircraft

, NuSil Technology LLC

K. K. Lau, J. Bico, K. B. Teo, M. Chowalla, G. A. Amaratunga et al., Superhydrophobic carbon nanotube forests, Nano Lett, vol.3, issue.12, pp.1701-1705, 2003.

Y. C. Jung and B. Bhushan, Mechanically durable carbon nanotube-composite hierarchical structures with superhydrophobicity, self-cleaning, and low-drag, ACS Nano, vol.3, issue.12, pp.4155-4163, 2009.

A. O. Raji, T. Varadhachary, K. Nan, T. Wang, J. Lin et al., Composites of graphene nanoribbon stacks and epoxy for joule heating and deicing of surfaces, ACS Appl. Mater. Interfaces, vol.8, pp.3551-3556, 2016.

V. Volman, Y. Zhu, A. O. Raji, B. Genorio, W. Lu et al., Radio-frequency-transparent, electrically conductive graphene nanoribbon thin film as deicing heating layers, Appl. Mater. Interfaces, vol.6, pp.298-304, 2014.

F. Institute and I. , Anti-icing coatings and de-icing technical approaches and status

T. Wang, Y. Zheng, A. O. Raji, Y. Li, W. K. Sikkema et al., Passive anti-icing and active deicing films, vol.8, pp.14169-14173, 2016.

T. V. Charpentier, A. Neville, P. Milner, R. W. Hewson, and A. Morina, Development of anti-icing materials by chemical tailoring of hydrophobic textured metallic surfaces, J. Colloid Interface Sci, vol.394, pp.539-544, 2013.

G. D. Bixler and B. Bhushan, Bioinspired micro/nanostructured surfaces for oil drag reduction in closed channel flow, Soft Matter, vol.9, pp.1620-1635, 2013.

Y. C. Jung and B. Bhushan, Biomimetic structures for fluid drag reduction in laminar and turbulent flows, J. Phys. Condens. Matter, vol.22, pp.35104-35113, 2010.

M. I. Gibson, Slowing the growth of ice with synthetic macromolecules: beyond antifreeze(glyco) proteins, Polym. Chem, vol.1, issue.8, pp.1141-1152, 2010.

, Concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Establishing a European Chemicals Agency, 1907.

A. Heinrich, R. Ross, G. Zumwalt, J. Provorse, V. Padmanabhan et al., Aircraft Icing Handbook, vol.3, 1991.

M. L. Toulouse and R. Lewis, A350XWB icing certification overview, AE 2015 International Conference on Icing of Aircraft, Engines, and Structures, 2015.

, ISO 2409, Paints and Varnishes-Cross-Cut Test, 2013.

, Defence Standard 00-35 Environmental Handbook for Defence Material: Part 4: Natural Environments, 2006.

, Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets, ASTM G76-13, 2013.

D. N. Anderson and A. D. Reich, Tests of the performance of coatings for low ice adhesion, 35th Aerospace Sciences Meeting and Exhibit, 1997.

A. Alizadeh, V. Bahadur, A. Kulkarni, M. Yamada, and J. A. Ruud, Hydrophobic surfaces for control and enhancement of water phase transitions, Interf. Mater. Spec. Wettabil, vol.38, issue.5, pp.407-411, 2013.

L. B. Boinovich, A. M. Emelyanenko, V. K. Ivanov, and A. S. Pashinin, Durable icephobic coating for stainless steel, ACS Appl. Mater. Interfaces, vol.5, pp.2549-2554, 2013.

C. Antonini, M. Innocenti, T. Horn, M. Marengo, and A. Amirfazli, Understanding the effect of superhydrophobic coatings on energy reduction in anti-icing system, Cold Reg. Sci. Technol, vol.67, pp.58-67, 2011.

A. Kraj and E. L. Bibeau, Measurement method and results of ice adhesion force on the curved surface of a wind turbine blade, Renew. Energy, vol.35, pp.741-746, 2010.

V. Pommier-budinger, M. Budinger, N. Tepylo, and X. Huang, Analysis of piezoelectric ice protection systems combined with ice-phobic coatings, 8th AIAA Atmospheric and Space Environments Conference, pp.13-17, 2016.

. Comité-d'etude-du-givrage, Publication Scientifiques et Techniques du Ministère de l'Air, vol.85, 1938.

J. L. Orr, Interim Report on Flight Tests of Thermal-Electric Propeller De-icing, 1942.

R. Scherrer, An Analytical Investigation of Thermal-Electric Means of Preventing Ice Formations on a Propeller Blade, Advance Confidential Report 4H31, 1944.

R. Scherrer and L. A. Rodert, Tests of Thermal-Electric De-icing Equipment for Propellers, 1944.

U. Von-glahn and R. E. Blatz, Investigation of Power Requirements for Ice Prevention and Cyclical De-icing of Inlet Guide Vanes with Internal Electric Heaters, Research Memorandum E50H29, 1950.

T. F. Gelder, J. P. Lewis, and S. L. Koutz, Ice Protection for a Turbojet Transport Airplane: Heating Requirements, Methods of Protection and Performance Penalties, Technical Note, 1953.

J. P. Lewis and D. T. Bowden, Preliminary Investigation of Cyclic De-icing of an Airfoil Using an External Electric Heater, Research Memorandum E51J30, 1952.

C. Laforte, J. L. Laforte, and J. C. Carrier, How a solid coating can reduce the adhesion of ice on a structure, International Workshop on Atmospheric Icing of Structures, 2002.

G. Fortin, M. Adomou, and J. Perron, Experimental study of hybrid anti-icing systems combining thermoelectric and hydrophobic coatings, SAE 2011 International Conference on Aircraft and Engine Icing and Ground Deicing, 2011.

D. Mangini, C. Antonini, M. Marengo, and A. Amirfazli, Runback ice formation mechanism on hydrophilic and superhydrophobic surfaces, Cold Reg. Sci. Technol, vol.109, pp.53-60, 2015.
DOI : 10.1016/j.coldregions.2014.09.012

M. Endres, H. Sommerwerk, C. Mendig, M. Sinapius, and P. Horst, Experimental study of two electro-mechanical de-icing systems applied on a wing section tested in an icing wind tunnel, CEAS Aeronaut. J, vol.8, issue.3, pp.429-439, 2017.

C. C. Ryerson, Assessment of Superstructure Ice Protection as Applied to Offshore Oil Operations Safety, 2009.

Z. Goraj, An overview of the deicing and anti-icing technologies with prospects for the future, 24th International Congress of the Aeronautical Science, pp.1-11, 2004.

. Cox-&-company-inc, Low Power Ice Protection Systems

V. Pommier-budinger, M. Budinger, P. Rouset, F. Dezitter, F. Huet et al., Electromechanical resonant ice protection systems: initiation of fractures with piezoelectric actuators, AIAA J, vol.56, issue.11, pp.4400-4411, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01892100

M. Budinger, V. Pommier-budinger, L. Bennani, P. Rouset, E. Bonaccurso et al., Electromechanical resonant ice protection systems: analysis of fracture propagation mechanisms, AIAA J, vol.56, issue.11, pp.4412-4422, 2018.

A. Overmeyer, J. Palacios, and E. Smith, Ultrasonic de-icing bondline design and rotor ice testing, AIAA J, vol.51, issue.12, pp.2965-2976, 2013.
DOI : 10.2514/1.j052601

M. K. Kalkowski, T. P. Waters, and E. Rustighi, Removing surface accretions with piezoexcited high-frequency structural waves, Active and Passive Smart Structures and Integrated Systems, 2015.
DOI : 10.1117/12.2087048
URL : https://eprints.soton.ac.uk/375840/1/MKK%2520-%2520Removing%2520surface%2520accretions%2520with%2520piezo-excited%2520high-frequency%2520structural%2520waves.pdf

T. Strobl, S. Storm, M. Kolb, J. Haag, and M. Hornung, Development of a hybrid ice protection system based on nanostructure hydrophobic surfaces, ICAS Conference, 2014.

|. Icing-research-tunnel and . Center, NASA, vol.14, 2018.

M. Nosonovsky and B. Bhushan, Roughness optimization for biomimetic superhydrophobic surfaces, Microsyst. Technol, vol.11, issue.7, pp.535-549, 2005.
DOI : 10.1007/s00542-005-0602-9

, Laboratory Ice Adhesion Test Results for Commercial Icephobic Coatings for Pratt & Whitney, CRREL, 2004.

Y. Zheng, X. Gao, and L. Jiang, Directional adhesion of superhydrophobic butterfly wings, Soft Matter, vol.3, pp.178-182, 2007.

, Ice and rain protection, Aviation Maintenance Technician Airframe Handbook, vol.2, 2012.

J. T. Salisbury, Microwave deicing and anti-icing system for aircraft, 1997.

C. Yin, Z. Zhang, Z. Wang, and H. Guo, Numerical simulation and experimental validation of ultrasonic de-icing system for wind turbine blade, Appl. Acoust, vol.114, pp.19-26, 2016.

R. F. Brady, A fracture mechanical analysis of fouling release from nontoxic antifouling coatings, Prog. Org. Coating, vol.43, issue.1, pp.188-192, 2001.

I. D. Johnston, D. K. Mccluskey, C. K. Tan, and M. C. Tracey, Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering, J. Micromech

X. Huang, , vol.24, 2014.

J. R. Davis, Metals Handbook Desk Edition, 1998.

S. Constantinescu and L. Orac, Mechanical properties of TiN thin films investigated using macromachining techniques, 19th International Conference on Metallurgy and Materials, 2010.

S. H. Kim, H. Park, K. H. Lee, S. H. Jee, D. Kim et al., Structure and mechanical properties of titanium nitride thin films grown by reactive pulsed laser deposition, J. Ceram. Process. Res, vol.10, issue.1, pp.49-53, 2009.

C. A. Klein and G. F. Cardinale, Young's modulus and Poisson's ratio of CVD diamond, Diam. Relat. Mater, vol.2, pp.918-923, 1993.