J. Morton and E. W. Godwin, Impact response of tough carbon fibre composites, Compos Struct, vol.13, issue.1, pp.1-19, 1989.

D. C. Prevorsek, H. B. Chin, and A. Bhatnagar, Damage tolerance: design for structural integrity and penetration, Compos Struct, vol.23, issue.2, pp.137-185, 1993.

I. De-baere, J. S. Van-paepegem, W. Degrieck, and J. , Study of the mode I and II inter-laminar behavior of a carbon fabric reinforced TP, Polym Test, vol.31, issue.2, pp.322-354, 2012.

P. Davies, M. L. Benzeggagh, D. Charentenay, and F. X. , The delamination behavior of carbon fiber reinforced PPS. 32nd int SAMPE symposium, pp.134-180, 1987.

F. Lachaud, B. Lorrain, L. Michel, and R. Barriol, Experimental and numerical study of delamination caused by local buckling of TP and TS composites, Compos Sci Technol, vol.58, pp.727-760, 1997.

O. 'brien and K. , Composite interlaminar shear fracture toughness G IIc : shear measurement or sheer myth. Technol Memorandum, NASA, 1997.

B. Vieille, V. M. Casado, and C. Bouvet, About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic-and thermosetting-composites: a comparative study, Compos Struct, vol.101, pp.9-21, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00859872

B. Vieille, V. M. Casado, and C. Bouvet, Influence of matrix toughness and ductility on the compression after impact behavior of woven-ply thermoplastic and thermosetting composites: a comparative study, Compos Struct, vol.110, pp.207-225, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00941315

K. Friedrich, R. Walter, L. A. Carlsson, A. J. Smiley, and J. W. Gillepsie, Mechanisms for rate effects on interlaminar fracture toughness of carbon/epoxy and carbon/peek composites, J Mater Sci, vol.24, issue.9, pp.3387-98, 1989.

A. J. Smiley and R. B. Pipes, Rate sensitivity of mode II interlaminar fracture toughness in graphite/epoxy and graphite/peek composite materials, Compos Sci Technol, vol.29, pp.1-15, 1987.

J. W. Gillepsie, L. A. Carlsson, and A. J. Smiley, Rate-dependent mode I interlaminar crack growth mechanisms in graphite/epoxy and graphite/peek, Compos Sci Technol, vol.28, pp.1-15, 1987.

A. J. Russell and K. N. Street, The effect of matrix toughness on delamination: static and fatigue fracture under mode II shear loading of graphite fiber composites, Tough Compos, vol.937, pp.275-94, 1987.

S. Rivallant, C. Bouvet, and N. Hongkarnjanakul, Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements, Compos Part A, vol.55, pp.83-93, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00869432

P. Prombut, L. Michel, F. Lachaud, and J. J. Barrau, Delamination of multidirectional composite laminates at 0°/Theta° ply interfaces, Eng Fract Mech, vol.7, issue.16, pp.2427-2469, 2006.

G. Davies and X. Zhang, Impact damage prediction in carbon composite structures, Int J Imp Eng, vol.16, pp.149-70, 1995.

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, Compos Struct, vol.106, pp.549-59, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00858522

H. Chai, Interlaminar shear fracture of laminated composites, Int J Fract, vol.43, pp.117-148, 1990.

B. Blackman, J. P. Dear, A. J. Kinloch, H. Macgillivray, Y. Wang et al., The failure of fibre composites and adhesively bonded fibre composites under high rates of test. Part III, J Mater Sci, vol.31, pp.4467-77, 1996.

L. Berger and W. J. Cantwell, Temperature and loading rate effects in the mode II interlaminar fracture behavior of carbon fiber reinforced PEEK, Polym Compos, vol.22, issue.2, pp.271-81, 2001.

P. Beguelin, M. Barbezat, and H. H. Kausch, Mechanical characterization of polymers and composites with a servohydraulic high-speed tensile tester, J Phys III, vol.1, issue.12, pp.1867-80, 1991.
URL : https://hal.archives-ouvertes.fr/jpa-00248708

O. Allix and P. Ladevèze, Damage analysis of interlaminar fracture specimens, Compos Struct, vol.31, pp.61-74, 1995.
URL : https://hal.archives-ouvertes.fr/hal-01745239

P. Davies, Protocols for interlaminar fracture testing of composites. ESIS-Polymers & Composites Task Group, 1993.

A. B. Pereira, A. B. Morais, A. T. Marques, and P. T. Castro, Mode II interlaminar fracture of carbon/epoxy multidirectional laminates, Compos Sci Technol, vol.64, pp.1653-1662, 2004.

A. N. Stroh, A theory of the fracture of metals, Adv Phys, vol.6, issue.24, pp.418-65, 1957.

J. Rayleigh, The theory of sound, vol.2, p.1896

J. L. Bluhm, Fracture arrest, fracture: an advanced treatise, 1969.

Z. Soumahoro, Etude du couplage thermomécanique dans la propagation dynamique de fissure. Thesis of Ecole Polytechnique, 2005.

J. M. Dulieu-barton and P. Stanley, Development and applications of thermoelastic stress analysis, J Strain Anal, vol.33, issue.2, pp.93-104, 1998.

P. Stanley and W. K. Chan, The application of thermoelastic stress analysis techniques to composite materials, J Strain Anal, vol.23, issue.3, pp.137-180, 1998.

T. Lisle, C. Bouvet, M. L. Pastor, P. Margueres, P. Corral et al., Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography, Compos Part A, vol.53, pp.75-87, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00858882

T. Lisle, C. Bouvet, N. Hongkarnjanakul, M. L. Pastor, S. Rivallant et al., Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography, Compos Sci Technol, vol.112, pp.22-33, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01847367

T. Lisle, C. Bouvet, M. L. Pastor, T. Rouault, and P. Margueres, Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts, J Mater Sci, vol.50, pp.6154-70, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01840570

G. I. Taylor and H. Quinney, The latent energy remaining in a metal after cold working, R Soc A: Math Phys Eng Sci, 1934.

D. Rittel, On the conversion of plastic work to heat during high strain rate deformation of glassy polymers, Mech Mater, vol.31, issue.2, pp.131-140, 1999.

R. Weichert and K. Schonert, On the temperature rise at the tip of a fast running crack, J Mech Phys Sol, vol.22, issue.2, pp.127-160, 1974.

R. Weichert and K. Schonert, Heat generation at the tip of a moving crack, J Mech Phys Sol, vol.26, issue.3, pp.151-61, 1978.

R. Kapoor and S. Nemat-nasser, Determination of temperature rise during high strain rate deformation, Mech Mater, vol.27, issue.1, pp.1-12, 1998.

Z. H. Li and J. Lambros, Strain rate effects on the thermomechanical behavior of polymers, Int J Sol Struct, vol.38, issue.20, pp.3549-62, 2001.

K. Bhalla, A. Zehnder, and X. Han, Thermomechanics of slow stable crack growth: closing the loop between experiments and computational modeling, Engng Fract Mech, vol.70, issue.17, pp.2439-58, 2003.

A. Zehnder, E. Babinsky, and T. Palmer, Hybrid method for determining the fraction of plastic work converted to heat, Exp Mech, vol.38, issue.4, pp.295-302, 1998.

, HexTow carbon fiber data sheet. Hexcel, 2014.

. Goodfellow-peek-resin-datasheet and . Goodfellow, , 2014.

F. Lemarchand, Etude de l'apparition des contraintes résiduelles dans le procédé d'empilement par soudage et consolidation en continu de composites thermoplastiques. Thesis of Ecole Nationale des Arts et Métiers, 2010.