R. J. Hussey and J. Wilson, Light Alloys: Directory and Databook, 2013.

V. Guillaumin and G. Mankowski, Localized corrosion of 2024 T351 aluminium alloy in chloride media, Corros. Sci, vol.41, pp.421-438, 1998.

X. Zhou, C. Luo, T. Hashimoto, A. E. Hughes, and G. E. Thompson, Study of localized corrosion in AA 2024 aluminium alloy using electron tomography, Corros. Sci, vol.58, pp.299-306, 2012.

A. Boag, A. E. Hughes, A. M. Glenn, T. H. Muster, and D. Mcculloch, Corrosion of AA 2024-T3 part I: localised corrosion of isolated IM particles, Corros. Sci, vol.53, pp.17-26, 2011.

Y. C. Lin, Y. C. Xia, Y. Q. Jiang, H. M. Zhou, and L. T. Li, Precipitation hardening of 2024T3 aluminum alloy during creep aging, Mater. Sci. Eng.: A, vol.565, pp.420-429, 2013.

S. C. Wang, M. J. Starink, and N. Gao, Precipitation hardening in Al-Cu-Mg alloys revisited, Scripta Mater, vol.54, pp.287-291, 2006.

H. Perlitz and A. Westgren, Arkiv Kemi Min. Geol, vol.16, pp.13-22, 1943.

S. C. Wang and M. J. Starink, Two types of S phase precipitates in Al-Cu-Mg alloys, Acta Mater, vol.55, pp.933-941, 2007.

E. A. Starke and J. T. Staley, Application of modern aluminum alloys to aircraft, Prog. Aerosp. Sci, vol.32, pp.131-172, 1996.

B. Heying, R. D. Hoffmann, and R. Pöttgen, Structure refinement of the S-phase precipitate MgCuAl 2, Zeitschrift für Naturforschung, vol.60, pp.491-494, 2005.

J. Zhang, Y. N. Huang, C. Mao, and P. Peng, Structural, elastic and electronic properties of ? (Al 2 Cu) and S (Al 2 CuMg) strengthening precipitates in Al-Cu-Mg series alloys: first-principles calculations, Solid State Commun, vol.152, pp.2100-2104, 2012.

Z. Wang, P. Chen, H. Li, B. Fang, R. Song et al., The intergranular corrosion susceptibility of 2024 Al alloy during re-ageing after solution treating and cold-rolling, Corros. Sci, vol.114, pp.156-168, 2017.

E. H. Hollingsworth and H. Y. Hunsicker, Metals Handbook, pp.583-609, 1987.

Y. Kim and R. G. Buchheit, A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys, Electrochim. Acta, vol.52, pp.2437-2446, 2007.

K. S. Ghosh, . Md, S. Hilal, and . Bose, Corrosion behavior of 2024 Al-Cu-Mg alloy of various tempers, Trans. Nonferrous Met. Soc. China, vol.23, pp.3215-3227, 2013.

N. Birbilis, M. K. Cavanaugh, L. Kovarik, and R. G. Buchheit, Nano-scale dissolution phenomena in Al-Cu-Mg alloys, Electrochem. Commun, vol.10, pp.32-37, 2008.

M. B. Vukmirovic, N. Dimitrov, and K. Sieradzki, Dealloying and corrosion of Al alloy 202-T3, J. Electrochem. Soc, vol.149, pp.428-439, 2002.

R. G. Buchheit, M. A. Martinez, and L. P. Montes, Evidence for Cu ion formation by dissolution and dealloying the Al 2 CuMg intermetallic compound in rotating ring-disk collection experiments, J. Electrochem. Soc, vol.147, pp.119-124, 2000.

J. A. Derose, T. Suter, A. Balkowiec, J. Michalski, K. J. Kurzydlowski et al., Localised corrosion initiation and microstructural characterisation of an Al 2024 alloy with a higher Cu to Mg ratio, Corros. Sci, vol.55, pp.313-325, 2012.

F. Andreatta, H. Terryn, and J. H. De-wit, Corrosion behaviour of different tempers of AA7075 aluminium alloy, Electrochim. Acta, vol.49, pp.2851-2862, 2004.

X. Verdalet-guardiola, J. Bonino, S. Duluard, B. Fori, and C. Blanc, Influence of the alloy microstructure and surface state on the protective properties of trivalent chromium coatings grown on a 2024 aluminium alloy, Surf. Coat. Technol, vol.344, pp.276-287, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01989083

T. Hashimoto, X. Zhang, X. Zhou, P. Skeldon, S. J. Haigh et al., Investigation of dealloying of S phase (Al 2 CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging, Corros. Sci, vol.103, pp.157-164, 2016.

Z. Feng, Y. Liu, T. Hashimoto, G. E. Thompson, X. Zhou et al., Influence of surface pretreatments on the corrosion protection of sol-gel coated AA2024-T3 aluminium alloy, Surf. Interface Anal, vol.45, pp.1452-1456, 2013.

K. J. Nelson, A. E. Hughes, R. J. Taylor, B. R. Hinton, L. Wilson et al., Characterisation of aluminium alloys after HNO 3 /HF-NaOH-HNO 3 /HF pretreatment, Mater. Sci. Technol, vol.17, pp.1211-1221, 2001.

A. E. Hughes, G. Theodossiou, S. Elliott, T. G. Harvey, P. R. Miller et al., Study of deoxidation of 2024-T3 with various acids, vol.17, pp.1642-1652, 2001.

G. Goeminne, H. Terryn, and J. Vereecken, EIS study of the influence of aluminium etching on the growth of chromium phosphate conversion layers, Electrochim. Acta, vol.43, pp.1829-1838, 1998.

Ö. Özkanat, F. M. De-wit, J. H. De-wit, H. Terryn, and J. M. Mol, Influence of pretreatments and aging on the adhesion performance of epoxy-coated aluminium, Surf. Coat. Technol, vol.215, pp.260-265, 2013.

A. E. Hughes, T. G. Harvey, T. Nikpour, T. H. Muster, and S. G. Hardin, Non-chromate deoxidation of AA2024-T3 using Fe(III)-HF-HNO 3, Surf. Interface Anal, vol.36, pp.15-23, 2004.

J. Qi, A. N?mcová, J. R. Walton, X. Zhou, P. Skeldon et al., Influence of pre-and post-treatments on formation of a trivalent chromium conversion coating on AA 2024 alloy, Thin Solid Films, vol.616, pp.270-278, 2016.

F. Andreatta, A. Turco, I. De-graeve, H. Terryn, J. H. De-wit et al., SKPFM and SEM study of the deposition mechanism of Zr/Ti based pre-treatment on AA6016 aluminum alloy, Surf. Coat. Technol, vol.201, pp.7668-7685, 2007.

J. Cerezo, I. Vandendael, R. Posner, K. Lill, J. H. De-wit et al., Initiation and growth of modified Zr-based conversion coatings on multi-metal surfaces, Surf. Coat. Technol, vol.236, pp.284-289, 2013.

L. Li, K. P. Doran, and G. M. Swain, Electrochemical characterization of trivalent chromium process (TCP) coatings on aluminum alloys 6061 and 7075, J. Electrochem. Soc, vol.160, pp.396-401, 2013.

L. Li, A. L. Desouza, and G. M. Swain, Effect of deoxidation pretreatment on the corrosion inhibition provided by a trivalent chromium process (TCP) conversion coating on AA 2024-T3, J. Electrochem. Soc, vol.161, pp.246-253, 2014.

Y. Guo and G. S. Frankel, Active corrosion inhibition of AA 2024-T3 by trivalent chrome process treatment, corrosion, J. Sci. Eng, vol.68, pp.45002-045001, 2012.

J. Qi, L. Gao, Y. Li, Z. Wang, G. E. Thompson et al., An optimized trivalent chromium conversion coating process for AA 2024-T351 alloy, J. Electrochem. Soc, vol.164, pp.390-395, 2017.

J. Qi, T. Hashimoto, J. R. Walton, X. Zhou, P. Skeldon et al., Trivalent chromium conversion coating formation on aluminium, Surf. Coat. Technol, vol.280, pp.317-329, 2015.

R. Viroulaud, J. Swiatowska, A. Seyeux, S. Zanna, J. Tardelli et al., Influence of surface pretreatments on the quality of trivalent chromium process coatings on aluminum alloy, Appl. Surf. Sci, vol.423, pp.927-938, 2017.

R. Grilli, M. A. Baker, J. E. Castle, B. Dunn, and J. F. Watts, Localized corrosion of a 2219 aluminium alloy exposed to a 3.5% NaCl solution, Corros. Sci, vol.52, pp.2855-2866, 2010.

K. Mutombo, Intermetallic particles-induced pitting corrosion in 6061-T651 aluminium alloy, Materials Science Forum, Trans. Tech. Publ, pp.389-392, 2011.

R. G. Buchheit, R. P. Grant, P. F. Hlava, B. Mckenzie, and G. L. Zender, Local dissolution phenomena associated with S phase (Al 2 CuMg) particles in aluminum alloy 2024T3, J. Electrochem. Soc, vol.144, pp.2621-2628, 1997.

M. Gao, C. R. Feng, and R. P. Wei, An analytical electron microscopy study of constituent particles in commercial 7075-T6 and 2024-T3 alloys, Metall. Mater. Trans. A, vol.29, pp.1145-1151, 1998.

R. P. Wei, C. M. Liao, and M. Gao, A transmission electron microscopy study of constituent-particle-induced corrosion in 7075-T6 and 2024-T3 aluminum alloys, Metall. Mater. Trans. A, vol.29, pp.1153-1160, 1998.

A. Boag, A. E. Hughes, N. C. Wilson, A. Torpy, C. M. Macrae et al., How complex is the microstructure of AA 2024-T3?, Corros. Sci, vol.51, pp.1565-1568, 2009.

G. M. Brown and K. Kobayashi, Nucleation and growth of a chromate conversion coating on aluminum alloy AA 2024-T3, J. Electrochem. Soc, vol.148, pp.457-466, 2001.

N. Birbilis and R. G. Buchheit, Electrochemical characteristics of intermetallic phases in aluminum alloys: an experimental survey and discussion, J. Electrochem. Soc, vol.152, pp.140-151, 2005.

C. Blanc, B. Lavelle, and G. Mankowski, The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy, Corros. Sci, vol.39, pp.495-510, 1997.

K. D. Ralston, N. Birbilis, M. K. Cavanaugh, M. Weyland, B. C. Muddle et al., Role of nanostructure in pitting of Al-Cu-Mg alloys, Electrochim. Acta, vol.55, pp.7834-7842, 2010.

M. Kendig, S. Jeanjaquet, R. Addison, and J. Waldrop, Role of hexavalent chromium in the inhibition of corrosion of aluminum alloys, Surf. Coat. Technol, vol.140, pp.58-66, 2001.

L. Xia and R. L. Mccreery, Chemistry of a chromate conversion coating on aluminum alloy AA 2024-T3 probed by vibrational spectroscopy, J. Electrochem. Soc, vol.145, pp.3083-3089, 1998.

J. Zhao, G. Frankel, and R. L. Mccreery, Corrosion protection of untreated AA-2024-T3 in chloride solution by a chromate conversion coating monitored with Raman spectroscopy, J. Electrochem. Soc, vol.145, pp.2258-2264, 1998.

E. Eichinger, J. Osborne, and T. Van-cleave, Hexavalent chromium elimination: an aerospace industry progress report, Met. Finish, vol.95, pp.36-41, 1997.

S. Merenyi, With an Introduction and Future Prospects Regarding the Area of Chemicals Legislation, Consolidated Version, 1907.

J. Qi, T. Hashimoto, J. Walton, X. Zhou, P. Skeldon et al., Formation of a trivalent chromium conversion coating on AA 2024-T351 alloy, J. Electrochem. Soc, vol.163, pp.25-35, 2016.

Y. Guo and G. S. Frankel, Characterization of trivalent chromium process coating on AA 2024-T3, Surf. Coat. Technol, vol.206, pp.3895-3902, 2012.

L. Li, A. L. Desouza, and G. M. Swain, situ pH measurement during the formation of conversion coatings on an aluminum alloy (AA 2024), vol.138, pp.4398-4402, 2013.

Q. Meng and G. S. Frankel, Effect of copper content on chromate conversion coating protection of 7xxx-T6 aluminum alloys, Corrosion, vol.60, pp.897-905, 2004.

M. A. Jakab, D. A. Little, and J. R. Scully, Experimental and modeling studies of the oxygen reduction reaction on AA 2024-T3, J. Electrochem. Soc, vol.152, pp.311-320, 2005.

D. A. Little, M. A. Jakab, and J. R. Scully, Effect of surface pretreatment on the underpaint corrosion of AA 2024-T3 at various temperatures, Corrosion, vol.62, pp.300-315, 2006.

A. J. Davenport and B. Liu, Copper accumulation during cleaning of Al-Cu alloys, pp.41-46, 2001.

P. J. Hurley and F. J. Humphreys, A study of recrystallization in single-phase aluminium using in-situ annealing in the scanning electron microscope, J. Microsc, vol.213, pp.225-234, 2004.

Z. Huda, N. I. Taib, and T. Zaharinie, Characterization of 2024-T3: an aerospace aluminum alloy, Mater. Chem. Phys, vol.113, pp.515-517, 2009.

A. E. Hughes, C. Macrae, N. Wilson, A. Torpy, T. H. Muster et al., Sheet AA 2024-T3: a new investigation of microstructure and composition, vol.42, pp.334-338, 2010.

A. Hughes, T. H. Muster, A. Boag, A. M. Glenn, C. Luo et al., Co-operative corrosion phenomena, Corros. Sci, vol.52, pp.665-668, 2010.

S. C. Wang and M. J. Starink, Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys, Int. Mater. Rev, vol.50, pp.193-215, 2005.

N. D. Alexopoulos, Z. Velonaki, C. I. Stergiou, and S. K. Kourkoulis, The effect of artificial ageing heat treatments on the corrosion-induced hydrogen embrittlement of 2024 (Al-Cu) aluminium alloy, Corros. Sci, vol.102, pp.413-424, 2016.

C. K. Moy, M. Weiss, J. Xia, G. Sha, S. P. Ringer et al., Influence of heat treatment on the microstructure, texture and formability of 2024 aluminium alloy, Mater. Sci. Eng.: A, vol.552, pp.48-60, 2012.

S. P. Ringer and K. Hono, Microstructural evolution and age hardening in aluminium alloys: atom probe field-ion microscopy and transmission electron microscopy studies, Mater. Charact, vol.44, pp.101-131, 2000.

T. J. Bastow and A. J. Hill, Guinier-preston and guinier-preston-bagaryatsky zone reversion in Al-Cu-Mg alloys studied by NMR, Materials Science Forum, Trans. Tech. Publ, pp.1385-1390, 2006.

Y. A. Bagaryatsky, Structural changes on aging Al-Cu-Mg alloys, pp.397-559, 1952.

G. Sha, R. K. Marceau, X. Gao, B. C. Muddle, and S. P. Ringer, Nanostructure of aluminium alloy 2024: segregation, clustering and precipitation processes, Acta Mater, vol.59, pp.1659-1670, 2011.