A. F. Sousa, C. Vilela, A. C. Fonseca, M. Matos, C. S. Freire et al., Biobased polyesters and other polymers from 2,5-furandicarboxylic acid: a tribute to furan excellency, Polym. Chem, vol.6, pp.5961-5983, 2015.

G. Z. Papageorgiou, D. G. Papageorgiou, Z. Terzopoulou, and D. N. Bikiaris, Production of bio-based 2,5-furan dicarboxylate polyesters: recent progress and critical aspects in their synthesis and thermal properties, Eur. Polym. J, vol.83, pp.202-229, 2016.

S. K. Burgess, J. E. Leisen, B. E. Kraftschik, C. R. Mubarak, R. M. Kriegel et al., Chain mobility, thermal, and mechanical properties of poly(ethylene furanoate) compared to poly(ethylene terephthalate), Macromolecules, vol.47, pp.1383-1391, 2014.

G. Z. Papageorgiou, V. Tsanaktsis, and D. N. Bikiaris, Synthesis of poly(ethylene furandicarboxylate) polyester using monomers derived from renewable resources: thermal behavior comparison with PET and PEN, Phys. Chem. Chem. Phys, vol.16, pp.7946-7958, 2014.

G. Stoclet, G. Gobius-du-sart, B. Yeniad, S. De-vos, and J. M. Lefebvre, Isothermal crystallization and structural characterization of poly(ethylene-2,5-furanoate), Polymer, vol.72, pp.165-176, 2015.

J. G. Van-berkel, N. Guigo, J. J. Kolstad, L. Sipos, B. Wang et al., Isothermal crystallization kinetics of poly (ethylene 2,5-furandicarboxylate), Macromol. Mater. Eng, vol.300, pp.466-474, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01150884

A. Codou, N. Guigo, J. Van-berkel, E. Jong, and N. Sbirrazzuoli, Non-isothermal crystallization kinetics of biobased poly(ethylene 2,5-furandicarboxylate) synthesized via the direct esterification process, Macromol. Chem. Phys, vol.215, pp.2065-2074, 2014.

V. Tsanaktsis, D. G. Papageorgiou, S. Exarhopoulos, D. N. Bikiaris, and G. Z. Papageorgiou, Crystallization and polymorphism of poly(ethylene furanoate), Cryst. Growth Des, vol.15, pp.5505-5512, 2015.

P. L. Carr, T. M. Nicholson, and I. M. Ward, Mesophase structures in poly(ethylene terephthalate), poly(ethylene naphthalate) and poly(ethylene naphthalate bibenzoate), Polym. Adv. Technol, vol.8, pp.592-600, 1997.

S. Ran, Z. Wang, C. Burger, B. Chu, and B. S. Hsiao, Mesophase as the precursor for strain-induced crystallization in amorphous poly(ethylene terephthalate) film, Macromolecules, vol.35, pp.10102-10107, 2002.

G. E. Welsh, D. J. Blundell, and A. H. Windle, A transient mesophase on drawing polymers based on polyethylene terephthalate (PET) and polyethylene naphthoate (PEN), J. Mater. Sci, vol.35, pp.5225-5240, 2000.

A. Mahendrasingam, C. Martin, W. Fuller, D. J. Blundell, R. J. Oldman et al., Observation of a transient structure prior to strain-induced crystallization in poly, Polymer, vol.41, pp.1217-1221, 2000.

E. Deloye, J. Haudin, and N. Billon, Stretch-blow molding of PET copolymers -influence of molecular architecture, Int. Polym. Process, vol.27, pp.358-369, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00722028

E. Gorlier, Caractérisation rhéologique et structurale d'un PET. Application au procédé de bi-étirage soufflage de bouteilles, Mines ParisTech, 2001.

Y. Marco, Multi-axial behaviour and micro-structural caracterization of a semicristalline polymer : the case of P.E.T, École normale supérieure de Cachan, 2003.
URL : https://hal.archives-ouvertes.fr/tel-00005271

G. Quandalle, Étude et modélisation mécanique de la cristallisation induite par la déformation des polymères : caoutchouc naturel réticulé et PET, Mines ParisTech, 2017.

M. Picard, Strain Induced Crystallisation during Stretch Blow Moulding of PET; Correlation with Strain Hardening, MinesParisTech, 2008.

C. E. Federico, J. L. Bouvard, C. Combeaud, and N. Billon, Large strain/time dependent mechanical behaviour of PMMAs of different chain architectures. Application of time-temperature superposition principle, Polymer, vol.139, pp.177-187, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01723367

V. Fabre, G. Quandalle, N. Billon, and S. Cantournet, Time-Temperature-Water content equivalence on dynamic mechanical response of polyamide 6, Polymer, vol.6, pp.22-29, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01112802

G. Stoclet, J. M. Lefebvre, B. Yeniad, G. Gobius-du-sart, and S. De-vos, On the straininduced structural evolution of Poly(ethylene-2,5-furanoate) upon uniaxial stretching: an in-situ SAXS-WAXS study, Polymer, vol.134, pp.227-241, 2018.

Y. Mao, D. G. Bucknall, and R. M. Kriegel, Synchrotron X-ray scattering study on amorphous poly(ethylene furanoate) under uniaxial deformation, Polymer, vol.139, pp.60-67, 2018.

Y. Mao, D. G. Bucknall, and R. M. Kriegel, Simultaneous WAXS/SAXS study on semicrystalline Poly(ethylene furanoate) under uniaxial stretching, Polymer, vol.143, pp.228-236, 2018.

J. G. Van-berkel, N. Guigo, J. J. Kolstad, and N. Sbirrazzuoli, Biaxial orientation of poly (ethylene 2,5-furandicarboxylate): an explorative study, Macromol. Mater. Eng, 2018.

L. G. Kazaryan and F. M. Medvedeva, X-ray study of poly (ethylene furan-2, 5-dicarboxylate) structure, Vysokomol. Soedin. Seriya B Kratk. Soobshcheniya, vol.10, pp.305-306, 1968.

Y. Mao, R. M. Kriegel, and D. G. Bucknall, The crystal structure of poly(ethylene furanoate), Polymer, vol.102, pp.308-314, 2016.

E. Gorlier, J. Haudin, and N. Billon, Strain-induced crystallisation in bulk amorphous PET under uni-axial loading, Polymer, vol.42, pp.9541-9549, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00536370

G. Lebourvellec, L. Monnerie, and J. P. Jarry, Amorphous orientation and induced crystallization in uniaxially stretched poly(ethylene terephthalate glycol), Polymer, vol.27, pp.856-860, 1986.

D. Kawakami, S. Ran, C. Burger, B. Fu, I. Sics et al., Mechanism of structural formation by uniaxial deformation in amorphous poly(ethylene terephthalate) above the glass temperature, Macromolecules, vol.36, pp.9275-9280, 2003.

D. R. Salem, Development of crystalline order during hot-drawing of poly(ethylene terephthalate) film: influence of strain rate, Polymer, vol.33, pp.3182-3188, 1992.

N. Billon, M. Picard, and E. Gorlier, Stretch blow moulding of PET; structure development and constitutive model, Int. J. Mater. Form, vol.7, pp.369-378, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00820970

A. Codou, M. Moncel, J. G. Van-berkel, N. Guigo, and N. Sbirrazzuoli, Glass transition dynamics and cooperativity length of poly(ethylene 2,5-furandicarboxylate) compared to poly(ethylene terephthalate), Phys. Chem. Chem. Phys, vol.18, pp.16647-16658, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01336898

G. L. Bourvellec and J. Beautemps, Stretching of PET films under constant load. II. Structural analysis, J. Appl. Polym. Sci, vol.39, pp.329-339, 1990.

M. Kattan, E. Dargent, and J. Grenet, Three phase model in drawn thermoplastic polyesters: comparison of differential scanning calorimetry and thermally stimulated depolarisation current experiments, Polymer, vol.43, pp.1399-1405, 2002.

M. Arnoult, E. Dargent, and J. F. Mano, Mobile amorphous phase fragility in semicrystalline polymers: comparison of PET and PLLA, Polymer, vol.48, pp.1012-1019, 2007.

R. Androsch and B. Wunderlich, The link between rigid amorphous fraction and crystal perfection in cold-crystallized poly(ethylene terephthalate), Polymer, vol.46, pp.12556-12566, 2005.

C. Menager, Polymer, vol.158, pp.364-371, 2018.