S. Agrawal and M. K. Tiwari, A collaborative ant colony algorithm to stochastic mixed-model U-shaped disassembly line balancing and sequencing problem, International Journal of Production Research, vol.46, issue.6, pp.1405-1429, 2008.

T. Agrawal, A. Sao, K. J. Fernandes, M. Kumar-tiwari, and D. Kim, A hybrid model of component sharing and platform modularity for optimal product family design, International Journal of Production Research, vol.51, issue.2, pp.614-625, 2013.

F. Altekin and . Tevhide, A comparison of piecewise linear programming formulations for stochastic disassembly line balancing, International Journal of Production Research, vol.55, issue.24, pp.7412-7434, 2017.

O. Battaïa and A. Dolgui, A taxonomy of line balancing problems and their solutionapproaches, International Journal of Production Economics, vol.142, issue.2, pp.259-277, 2013.

M. Bentaha, O. Lounes, A. Battaïa, S. J. Dolgui, and . Hu, Dealing with uncertainty in disassembly line design, CIRP Annals-Manufacturing Technology, vol.63, issue.1, pp.21-24, 2014.
URL : https://hal.archives-ouvertes.fr/emse-00978385

M. Bentaha, A. Lounes, O. Dolgui, R. J. Battaïa, J. Riggs et al., Profit-oriented partial disassembly line design: dealing with hazardous parts and task processing times uncertainty, International Journal of Production Research, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02059551

M. Bentaha, O. Lounes, A. Battaïa, S. J. Dolgui, and . Hu, Second order conic approximation for disassembly line design with joint probabilistic constraints, European Journal of Operational Research, vol.247, issue.3, pp.957-967, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01963258

M. Bentaha, O. Lounes, A. Battaïa, and . Dolgui, An exact solution approach for disassembly line balancing problem under uncertainty of the task processing times, International Journal of Production Research, vol.53, issue.6, pp.1807-1818, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01963273

G. Boothroyd and P. Dewhurst, DESIGN FOR ASSEMBLY-MANUAL ASSEMBLY, Machine Design, vol.55, issue.28, pp.140-145, 1983.

G. Boothroyd and L. Alting, Design for assembly and disassembly, CIRP AnnalsManufacturing, vol.41, issue.2, pp.625-636, 1992.

A. Bratcu, A. Iuliana, and . Dolgui, Some new results on the analysis and simulation of bucket brigades (self-balancing production lines), International Journal of Production Research, vol.47, issue.2, pp.369-387, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00387689

L. Brennan, S. M. Gupta, and K. N. Taleb, Operations planning issues in an assembly/disassembly environment, International Journal of Operations & Production Management, vol.14, issue.9, pp.57-67, 1994.

X. Chang, R. Rai, and J. Terpenny, Development and utilization of ontologies in design for manufacturing, Journal of Mechanical Design, vol.132, issue.2, p.21009, 2010.

S. K. Das, S. Vikram-datla, and . Gami, DFQM-An approach for improving the quality of assembled products, International Journal of Production Research, vol.38, issue.2, pp.457-477, 2000.

B. V. Dean and R. L. Salstrom, Management Through the Year 2000-Gaining the Competitive Advantage, Engineering Management Conference, pp.223-232, 1990.

D. Asl, A. Kuan-yew-wong, and M. Tiwari, Unequal-area stochastic facility layout problems: solutions using improved covariance matrix adaptation evolution strategy, particle swarm optimisation, and genetic algorithm, International Journal of Production Research, vol.54, issue.3, pp.799-823, 2016.

T. Dereli, I. H. Filiz, and A. Baykasoglu, Optimizing cutting parameters in process planning of prismatic parts by using genetic algorithms, International Journal of Production Research, vol.39, issue.15, pp.3303-3328, 2001.

G. Ding, L. Jiang, S. Qin, S. Zhu, and S. Ma, Computer-integrated manufacturing system for tube bending, International Journal of Computer Integrated Manufacturing, vol.25, issue.11, pp.1059-1068, 2012.

J. R. Duflou, B. Willems, and W. Dewulf, Towards self-disassembling products design solutions for economically feasible large-scale disassembly, Innovation in Life cycle Engineering and Sustainable development, pp.87-110, 2006.

W. Elmaraghy, H. Elmaraghy, T. Tomiyama, and L. Monostori, Complexity in engineering design and manufacturing, CIRP Annals-Manufacturing Technology, vol.61, issue.2, pp.793-814, 2012.

Y. Feng, G. Li, and S. P. Sethi, Pull and push contracts in a decentralised assembly system with random component yields, International Journal of Production Research, 2018.

A. Fiorentino, Cost drivers-based method for machining and assembly cost estimations in mould manufacturing, The International Journal of Advanced Manufacturing, vol.70, issue.5, pp.1437-1444, 2014.

D. P. Fitzgerald, J. W. Herrmann, and L. C. Schmidt, A conceptual design tool for resolving conflicts between product functionality and environmental impact, Journal of Mechanical Design, vol.132, issue.9, p.91006, 2010.

J. Gardan, Additive manufacturing technologies: state of the art and trends, International Journal of Production Research, vol.54, issue.10, pp.3118-3132, 2016.

P. Ghadimi, C. Amir-hossein-azadnia, A. Heavey, B. Dolgui, and . Can, A review on the buyer-supplier dyad relationships in sustainable procurement context: past, present and future, International journal of production research, vol.54, issue.5, pp.1443-1462, 2016.
URL : https://hal.archives-ouvertes.fr/emse-01192587

R. E. Giachetti, A decision support system for material and manufacturing process selection, Journal of Intelligent Manufacturing, vol.9, issue.3, pp.265-276, 1998.

M. Goswami, An integrative product line redesign approach for modular engineering products within a competitive market space: a multi-objective perspective, International Journal of Production Research, 2017.

A. Gungor and S. M. Gupta, Disassembly sequence planning for products with defective parts in product recovery, Computers & Industrial Engineering, vol.35, issue.1, pp.161-164, 1998.

H. 'mida, F. , and F. Vernadat, A constraint approach (flexible CSP) for alternative cost estimation of a mechanical product, International Journal of Production Research, vol.47, issue.2, pp.305-320, 2009.

*. Hague, S. Richard, N. Mansour, and . Saleh, Material and design considerations for rapid manufacturing, International Journal of Production Research, vol.42, issue.22, pp.4691-4708, 2004.

S. Harivardhini, K. M. Krishna, and A. Chakrabarti, An Integrated Framework for supporting decision making during early design stages on end-of-life disassembly, Journal of Cleaner Production, vol.168, pp.558-574, 2017.

S. Hezer and Y. Kara, A network-based shortest route model for parallel disassembly line balancing problem, International Journal of Production Research, vol.53, issue.6, pp.1849-1865, 2015.

J. Ho, Cost strategy for product planning under competition, International Journal of Production Research, 2018.

M. Ilgin, H. Ali, C. Akçay, and . Araz, Disassembly line balancing using linear physical programming, International Journal of Production Research55, issue.20, pp.6108-6119, 2017.

D. Ivanov, A. Dolgui, and B. Sokolov, The impact of digital technology and Industry 4.0 on the ripple effect and supply chain risk analytics, International Journal of Production Research, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02062526

B. D. James, B. Andrew, W. G. Spisak, and . Colella, Design for manufacturing and assembly cost estimate methodology for transportation fuel cell systems, Journal of Manufacturing Science and Engineering, vol.136, issue.2, p.24503, 2014.

Z. Jiao and Y. Xing, Clamping-sequence optimisation based on heuristic algorithm for sheet-metal components, International Journal of Production Research, 2017.

M. R. Johnson and M. Wang, Economical evaluation of disassembly operations for recycling, remanufacturing and reuse, International Journal of Production Research, vol.36, issue.12, pp.3227-3252, 1998.

S. Keivanpour and D. Kadi, Strategic eco-design map of the complex products: toward visualisation of the design for environment, International Journal of Production Research, 2017.

O. Kerbrat, P. Mognol, and J. Hascoët, A new DFM approach to combine machining and additive manufacturing, Computers in Industry, vol.62, issue.7, pp.684-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00600891

. Kim, C. Hyung-won, D. Park, and . Lee, Selective disassembly sequencing with random operation times in parallel disassembly environment, International Journal of Production Research, 2018.

. Kuo, C. Tsai, C. Hong, S. H. Zhang, and . Huang, Disassembly analysis for electromechanical products: a graph-based heuristic approach, International Journal of Production Research, vol.38, issue.5, pp.993-1007, 2000.

T. Lin, J. Lee, and E. L. Bohez, New integrated model to estimate the manufacturing cost and production system performance at the conceptual design stage of helicopter blade assembly, International journal of production research, vol.50, issue.24, pp.7210-7228, 2012.

M. Løkkegaard, N. H. Mortensen, and L. Hvam, Using business critical design rules to frame new architecture introduction in multi-architecture portfolios, International Journal of Production Research, 2018.

J. A. Mesa, D. Illera, I. Esparragoza, H. Maury, and H. Gómez, Functional characterisation of mechanical joints to facilitate its selection during the design of open architecture products, International Journal of Production Research, 2017.

J. A. Mesa, H. Iván-esparragoza, and . Maury, Development of a metric to assess the complexity of assembly/disassembly tasks in open architecture products, International Journal of Production Research, 2017.

. Mete, . Süleyman, E. Zeynel-abidin-Çil, K. Özceylan, O. A?pak et al., An optimisation support for the design of hybrid production lines including assembly and disassembly tasks, International Journal of Production Research, 2018.

N. Mishra, V. Kumar, N. Kumar, M. Kumar, and M. Tiwari, Addressing lot sizing and warehousing scheduling problem in manufacturing environment, Expert Systems with Applications, vol.38, issue.9, pp.11751-11762, 2011.

V. Modrak and Z. Soltysova, Development of operational complexity measure for selection of optimal layout design alternative, International Journal of Production Research, 2018.

N. P. Mukherjee and B. Ravi, An integrated framework for die and mold cost estimation using design features and tooling parameters, The international journal of advanced manufacturing technology, vol.26, issue.9, pp.1138-1149, 2005.

. Özceylan, C. B. Eren, A. Kalayci, S. M. Güngör, and . Gupta, Disassembly line balancing problem: a review of the state of the art and future directions, International Journal of Production Research, 2018.

R. Rai and V. Allada, Modular product family design: agent-based Paretooptimization and quality loss function-based post-optimal analysis, International Journal of Production Research, vol.41, issue.17, pp.4075-4098, 2003.

K. V. Ramana and P. V. Rao, Automated manufacturability evaluation system for sheet metal components in mass production, International Journal of Production Research, vol.43, issue.18, pp.3889-3913, 2005.

Y. Ren, D. Yu, C. Zhang, G. Tian, L. Meng et al., An improved gravitational search algorithm for profit-oriented partial disassembly line balancing problem, International Journal of Production Research, vol.55, issue.24, pp.7302-7316, 2017.

A. Salmi, P. David, E. Blanco, O. Briant, and J. Summers, A cost estimation model to support automation decision in assembly systems design, International Journal of Production Research, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01838499

R. Singh, R. Sharma, and J. P. Davim, Mechanical properties of bio compatible functional prototypes for joining applications in clinical dentistry, International Journal of Production Research, pp.1-11, 2017.

H. W. Stoll, Design for manufacture: an overview, Applied Mechanics Reviews, vol.39, issue.9, pp.1356-1364, 1986.

M. K. Tiwari, N. Sinha, S. Kumar, R. Rai, and S. K. Mukhopadhyay, A Petri net based approach to determine the disassembly strategy of a product, International Journal of Production Research, vol.40, issue.5, pp.1113-1129, 2002.

P. Tuli and R. Shankar, Collaborative and lean new product development approach: a case study in the automotive product design, International Journal of Production Research, vol.53, issue.8, pp.2457-2471, 2015.

Y. Wang, Y. Lin, R. Y. Zhong, and X. Xu, IoT-enabled cloud-based additive manufacturing platform to support rapid product development, International Journal of Production Research, pp.1-17, 2018.

S. Q. Xie, Y. L. Tu, R. Y. Fung, and Z. D. Zhou, Rapid one-of-a-kind product development via the Internet: a literature review of the state-of-the-art and a proposed platform, International Journal of Production Research, vol.41, issue.18, pp.4257-4298, 2003.

Y. Zengin and E. Ada, Cost management through product design: target costing approach, International Journal of production research, vol.48, issue.19, pp.5593-5611, 2010.

H. C. Zhang, C. Tsai, H. Kuo, S. H. Lu, and . Huang, Environmentally conscious design and manufacturing: a state-of-the-art survey, Journal of manufacturing systems, vol.16, issue.5, p.352, 1997.

F. Zheng, J. He, F. Chu, and M. Liu, A new distribution-free model for disassembly line balancing problem with stochastic task processing times, International Journal of Production Research, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01690483

L. Zhu, Z. Zhang, and Y. Wang, A Pareto firefly algorithm for multi-objective disassembly line balancing problems with hazard evaluation, International Journal of Production Research, 2018.