X. L. Zhao, H. D. Gao, G. F. Zhang, B. Ayhan, F. Yan et al., Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring, Smart Mater Struct, vol.65, pp.1208-1225, 2007.

S. R. Ignatovich, A. Menou, M. V. Karuskevich, and P. O. Maruschak, Fatigue damage and sensor development for aircraft structural health monitoring, Theor Appl Fract Mech, vol.65, pp.23-30, 2013.

K. Diamanti and C. Soutis, Structural health monitoring techniques for aircraft composite structures, Prog Aerosp Sci, vol.46, issue.8, pp.342-52, 2010.

J. B. Ihn and F. Chang, Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics, Smart Mater Struct, vol.13, issue.3, p.609, 2004.

D. An, N. H. Kim, and J. Choi, Practical options for selecting datadriven or physics-based prognostics algorithms with reviews, Reliab Eng Syst Saf, vol.133, pp.223-259, 2015.

X. Si, W. Wang, C. Hu, and D. Zhou, Remaining useful life estimationa review on the statistical data driven approaches, Eur J Oper Res, vol.213, issue.1, pp.1-14, 2011.

P. Paris and F. Erdogan, A critical analysis of crack propagation laws, J Basic Eng, vol.85, issue.4, pp.528-561, 1963.

N. Pugno, M. Ciavarella, P. Cornetti, and A. Carpinteri, A generalized Paris' law for fatigue crack growth, J Mech Phys Solids, vol.54, issue.7, pp.1333-1382, 2006.

Z. Sun and M. Huang, Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap, Chin J Aeronaut, vol.26, issue.3, pp.601-606, 2013.

A. Van-horenbeek and L. Pintelon, A dynamic predictive maintenance policy for complex multi-component systems, Reliab Eng Syst Saf, vol.120, pp.39-50, 2013.

M. Traore, A. Chammas, and E. Duviella, Supervision and prognosis architecture based on dynamical classification method for the predictive maintenance of dynamical evolving systems, Reliab Eng Syst Saf, vol.136, pp.120-151, 2015.

K. Nguyen, P. Do, and A. Grall, Multi-level predictive maintenance for multi-component systems, Reliab Eng Syst Saf, vol.144, pp.83-94, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01183225

`. Curcuru, G. Galante, and A. Lombardo, A predictive maintenance policy with imperfect monitoring, Reliab Eng Syst Saf, vol.95, issue.9, pp.989-97, 2010.

Y. Langeron, A. Grall, and A. Barros, A modeling framework for deteriorating control system and predictive maintenance of actuators, Reliab Eng Syst Saf, vol.140, pp.22-36, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02287484

J. Liu, M. Zhang, H. Zuo, and J. Xie, Remaining useful life prognostics for aeroengine based on superstatistics and information fusion, Chin J Aeronaut, vol.27, issue.5, pp.1086-96, 2014.

C. Hu, Z. Zhou, J. Zhang, and X. Si, A survey on life prediction of equipment, Chin J Aeronaut, vol.28, issue.1, pp.25-33, 2015.

H. Wang, T. Xu, and Q. Mi, Lifetime prediction based on Gamma processes from accelerated degradation data, Chin J Aeronaut, vol.28, issue.1, pp.172-181, 2015.

X. Wang, S. Lin, S. Wang, Z. He, and C. Zhang, Remaining useful life prediction based on the Wiener process for an aviation axial piston pump, Chin J Aeronaut, vol.29, issue.3, pp.779-88, 2016.

N. Z. Gebraeel, M. A. Lawley, R. Li, and J. K. Ryan, Residual-life distributions from component degradation signals: A Bayesian approach, IIE Trans, vol.37, issue.6, pp.543-57, 2005.

M. Compare and E. Zio, Predictive maintenance by risk sensitive particle filtering, IEEE Trans Reliab, vol.63, issue.1, pp.134-177, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01787037

Y. Hu, P. Baraldi, D. Maio, F. Zio, and E. , A particle filtering and kernel smoothing-based approach for new design component prognostics, Reliab Eng Syst Saf, vol.134, pp.19-31, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01265661

W. Wang and M. Carr, A stochastic filtering based data driven approach for residual life prediction and condition based maintenance decision making support. Proceedings of the 2010 prognostics and system health management conference, pp.1-10, 2010.

W. Muheng, C. Maoyin, D. Zhou, and W. Wang, Remaining useful life prediction using a stochastic filtering model with multi-sensor information fusion. Proceedings of the 2011 prognostics and system health management conference, pp.1-6, 2011.

Y. Wang, C. Gogu, N. Binaud, and C. Bes, Predicting remaining useful life by fusing SHM data based on Extended Kalman Filter, Proceedings of the 25th European safety and reliability conference
URL : https://hal.archives-ouvertes.fr/hal-02051910

S. Lu, Y. Tu, and H. Lu, Predictive condition-based maintenance for continuously deteriorating systems, Qual Reliab Eng Int, vol.23, issue.1, pp.71-81, 2007.

O. Fink, E. Zio, and U. Weidmann, A classification framework for predicting components' remaining useful life based on discreteevent diagnostic data, IEEE Trans Reliab, vol.64, issue.3, pp.1049-56, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01340350

R. M. Gorguluarslan and S. Choi, Proceedings of the ASME 2013 international design engineering technical conferences and computers and information in engineering conference, 2007.

U. Portland, , pp.2-02, 2013.

T. H. Loutas, D. Roulias, and G. Georgoulas, Remaining useful life estimation in rolling bearings utilizing data-driven probabilistic Esupport vectors regression, IEEE Trans Reliab, vol.62, issue.4, pp.821-853, 2013.

X. S. Si, An adaptive prognostic approach via nonlinear degradation modeling: application to battery data, IEEE Trans Ind Electron, vol.62, issue.8, pp.5082-96, 2015.

X. S. Si, W. Wang, C. H. Hu, and D. H. Zhou, Estimating remaining useful life with three-source variability in degradation modeling, IEEE Trans Reliab, vol.63, issue.1, pp.167-90, 2014.

Z. Q. Wang, W. Wang, C. H. Hu, X. S. Si, and W. Zhang, A prognosticinformation-based order-replacement policy for a non-repairable critical system in service, IEEE Trans Reliab, vol.64, issue.2, pp.721-756, 2015.

A. Jardine, D. Lin, and D. Banjevic, A review on machinery diagnostics and prognostics implementing condition-based maintenance, Mech Syst Signal Proc, vol.20, issue.7, pp.1483-510, 2006.

S. Pattabhiraman, C. Gogu, N. H. Kim, R. T. Haftka, and C. Bes, Skipping unnecessary structural airframe maintenance using an on-board structural health monitoring system, Proc Inst Mech Eng Part O-J Risk Reliab, vol.226, issue.5, pp.549-60, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02185291

B. Huang and X. Du, Probabilistic uncertainty analysis by mean-value first order Saddlepoint approximation, Reliab Eng Syst Saf, vol.93, issue.2, pp.325-361, 2008.

M. S. Grewal and A. P. Andrews, Kalman filtering: Theory and practice with MATLAB, 2014.

M. B. Cortie and G. G. Garrett, On the correlation between the C and m in the Paris equation for fatigue crack propagation, Eng Fract Mech, vol.30, issue.1, pp.49-58, 1988.

J. P. Benson and D. V. Edmonds, The relationship between the parameters C and m of Paris' law for fatigue crack growth in a low-alloy steel, Scripta Mater Scripta Metallurgica, vol.12, issue.7, pp.645-652, 1978.

Ö. Bilir, The relationship between the parameters C and n of Paris' law for fatigue crack growth in a SAE 1010 steel, Eng Fract Mech, vol.36, issue.2, pp.361-365, 1990.