D. Nicoletti, N. Bilgutay, and B. Onaral, Power-law relationships between the dependence of ultrasonic attenuation on wavelength and the grain size distribution, J Acoust Soc Am, vol.91, pp.3278-3284, 1992.

D. Nicoletti and D. Kasper, Ultrasonic attenuation based on the roney generalized theory and multiple power-law grain-size distributions, IEEE Trans Ultrason Ferroelect Freq Control, vol.41, pp.144-149, 1994.
DOI : 10.1109/58.265833

I. Daniel, S. Wooh, and I. Komsky, Quantitative porosity characterization of composite materials by means of ultrasonic attenuation measurements, J Nondest Eval, vol.11, pp.1-8, 1992.

H. Jeong and D. Hsu, Experimental analysis of porosity-induced ultrasonic attenuation and velocity change in carbon composites, Ultrason, vol.33, pp.195-203, 1995.

V. J. Pinfield, R. E. Challis, and R. A. Smith, A comparison of stochastic and effective medium approaches to the backscattered signal from a porous layer in a solid matrix, J Acoust Soc Am, vol.130, pp.122-134, 2011.

E. Schmachtenberg, J. S. Heide, and J. Töpker, Application of ultrasonics for the process control of resin transfer moulding (RTM), Polymer Testing, vol.24, pp.330-338, 2005.

E. P. Papadakis, Monitoring the moduli of polymers with ultrasound, J Appl Phys, vol.45, pp.1218-1222, 1974.

A. Lindrose, Ultrasonic wave and moduli changes in a curing epoxy resin, Exp Mech, vol.18, pp.227-232, 1978.

S. I. Rokhlin, D. K. Lewis, K. F. Graff, and L. Adler, Real-time study of frequency dependence of attenuation and velocity of ultrasonic waves during the curing reaction of epoxy resin, J Acoust Soc Am, vol.79, pp.1786-1793, 1986.

R. Challis, T. Alper, R. Cocker, A. Holmes, and J. White, Ultrasonic absorption and velocity dispersion measurements in thin adhesive layers, vol.29, pp.22-28, 1991.
DOI : 10.1016/0041-624x(91)90169-9

D. Sidebottom, Ultrasonic measurements of an epoxy resin near its sol-gel transition, Phys Rev E, vol.48, pp.391-399, 1993.
DOI : 10.1103/physreve.48.391

B. Faiz, G. Maze, D. Decultot, A. Moudden, E. Aassif et al., Ultrasonic characterization of the quality of an epoxy resin polymerization, IEEE Trans Ultrason Ferroelect Freq Control, vol.46, pp.188-196, 1999.

M. Matsukawa and I. Nagai, Ultrasonic characterization of a polymerizing epoxy resin with imbalanced stoichiometry, J Acoust Soc Am, vol.99, pp.2110-2115, 1996.

R. B. Prime, Differential scanning calorimetry of the epoxy cure reaction, Polym Eng & Sci, vol.13, pp.365-371, 1973.

M. R. Kamal, Thermoset characterization for moldability analysis, Polym Eng & Sci, vol.14, pp.231-239, 1974.
DOI : 10.1002/pen.760140312

S. Sourour and M. R. Kamal, Differential scanning calorimetry of epoxy cure: isothermal cure kinetics, Thermochim. Acta, vol.14, pp.41-59, 1976.
DOI : 10.1016/0040-6031(76)80056-1

R. Hardis, J. L. Jessop, F. E. Peters, and M. R. Kessler, Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA, Comp. Part A, vol.49, pp.100-108, 2013.
DOI : 10.1016/j.compositesa.2013.01.021
URL : https://lib.dr.iastate.edu/cgi/viewcontent.cgi?article=1187&context=imse_pubs

S. R. White, P. T. Mather, and M. J. Smith, Characterization of the cure-state of DGEBA-DDS epoxy using ultrasonic, dynamic mechanical, and thermal probes, Polym Eng & Sci, vol.42, p.67, 2002.

W. Goertzen and M. Kessler, Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair, Comp. Part B, vol.38, pp.1-9, 2007.

F. Lionetto and A. Maffezzoli, Relaxations during the postcure of unsaturated polyester networks by ultrasonic wave propagation, dynamic mechanical analysis, and dielectric analysis, J Polym Sci Part B, vol.43, pp.596-602, 2005.

F. Lionetto, R. Rizzo, V. Luprano, and A. Maffezzoli, Phase transformations during the cure of unsaturated polyester resins, Mater Sci and Eng A, vol.370, pp.284-287, 2004.

J. Mc-hugh, Ultrasound technique for the dynamic mechanical analysis (DMA) of polymers, 2008.

J. Mc-hugh, P. Fideu, A. Herrmann, and W. Stark, Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques, Polym Test, vol.29, pp.759-765, 2010.

R. Challis, F. Blarel, M. Unwin, J. Paul, and X. Guo, Models of ultrasonic wave propagation in epoxy materials, IEEE Trans Ultrason Ferroelect Freq Control, vol.56, pp.1225-1237, 2009.

R. E. Challis, F. Blarel, M. E. Unwin, and X. Guo, On the modelling of ultrasonic bulk wave propagation in epoxies, J Phys: Conf Series, vol.269, 2011.

N. Ghodhbani, P. Marechal, and H. Duflo, Ultrasonic broadband characterization of a viscous liquid: Methods and perturbation factors, vol.56, pp.308-317, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01921816

N. Samet, P. Maréchal, and H. Duflo, Ultrasonic characterization of a fluid layer using a broadband transducer, Ultrason, vol.52, pp.427-434, 2012.

N. Samet, E. B. Ndiaye, P. Marechal, and H. Duflo, Polymerization monitoring using ultrasound, Int. Symp. on Nondest. Charact. of Mater, p.13, 2013.

P. He, Experimental verification of models for determining dispersion from attenuation, IEEE Trans Ultrason Ferroelect Freq Control, vol.46, pp.706-714, 1999.

P. He, Direct measurement of ultrasonic dispersion using a broadband transmission technique, vol.37, pp.67-70, 1999.

T. Szabo, Causal theories and data for acoustic attenuation obeying a frequency power law, J Acoust Soc Am, vol.97, pp.14-24, 1995.

O. Donnell, M. Jaynes, E. Miller, and J. , Kramers-Kronig relationship between ultrasonic attenuation and phase velocity, J Acoust Soc Am, vol.69, pp.696-701, 1981.

B. Treeby, B. Cox, E. Zhang, S. Patch, and P. Beard, Measurement of broadband temperature-dependent ultrasonic attenuation and dispersion using photoacoustics, IEEE Trans Ultrason Ferroelect Freq Control, vol.56, pp.1666-1676, 2009.

M. Naffakh, M. Dumon, and J. F. Gerard, Study of a reactive epoxy-amine resin enabling in situ dissolution of thermoplastic films during resin transfer moulding for toughening composites, Comp Sci and Tech, vol.66, pp.1376-1384, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00400103

F. Dimier, Reactive systems injection: kinetic and rheological laws determination and modelisation, 2003.
URL : https://hal.archives-ouvertes.fr/pastel-00001188

C. Paris, Analysis and modeling of the dynamic polymerization of thermosetting matrix composites, 2011.

F. Lionetto and A. Maffezzoli, Monitoring the cure state of thermosetting resins by ultrasound, Mater, vol.6, pp.3783-3804, 2013.

J. Wan, C. Li, Z. Y. Bu, C. J. Xu, B. G. Li et al., A comparative study of epoxy resin cured with a linear diamine and a branched polyamine, Chem Eng J, vol.188, pp.160-172, 2012.