M. A. Sutton, Computer vision-based, noncontacting deformation measurements in mechanics: A generational transformation, Appl. Mech. Rev, vol.65, p.50802, 2013.

J. Neggers, O. Allix, F. Hild, and S. Roux, Big Data in Experimental Mechanics and Model Order Reduction: Today's Challenges and Tomorrow's Opportunities, Arch. Comput. Meth. Eng, vol.25, issue.1, p.143164, 2018.

A. Tarantola, Inverse Problems Theory. Methods for Data Fitting and Model Parameter Estimation, 1987.

C. Mares, J. E. Mottershead, and M. I. Friswell, Stochastic model updating: Part 1-theory and simulated example, Mech. Syst. Signal Proc, vol.20, issue.7, p.16741695, 2006.

S. Avril, M. Bonnet, A. S. Bretelle, M. Grédiac, F. Hild et al., Overview of identication methods of mechanical parameters based on full-eld measurements, Exp. Mech, vol.48, issue.4, p.381402, 2008.

M. Grédiac and F. Hild, Full-Field Measurements and Identication in Solid Mechanics, 2012.

K. T. Kavanagh and R. W. Clough, Finite element applications in the characterization of elastic solids, Int. J. Solids Struct, vol.7, p.1123, 1971.

E. Pagnacco, A. S. Caro-bretelle, and P. Ienny, Parameter Identication from Mechanical Field Measurements using Finite Element Model Updating Strategies, p.247274, 2012.

C. Farhat and F. M. Hemez, Updating nite element dynamic models using an element-by-element sensitivity methodology, AIAA Journal, vol.31, issue.9, p.17021711, 1993.

J. D. Collins, G. C. Hart, T. K. Hasselman, and B. Kennedy, Statistical identication of structures, AIAA J, vol.12, issue.2, p.185190, 1974.

K. T. Kavanagh, Extension of classical experimental techniques for characterizing composite-material behavior, Exp. Mech, vol.12, issue.1, p.5056, 1972.

M. Bonnet and A. Constantinescu, Inverse problems in elasticity, verse Problems, vol.21, pp.1-50, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00111264

M. Bonnet, Introduction to Identication Methods, p.223246, 2012.

P. Ladevèze and D. Leguillon, Error estimate procedure in the nite element method and applications, SIAM J. Num. Analysis, vol.20, issue.3, pp.485-509, 1983.

P. Ladevèze, D. Nedjar, and M. Reynier, Updating of nite element models using vibration tests, vol.32, p.14851491, 1994.

S. Calloch, D. Dureisseix, and F. Hild, Identication de modèles de comportement de matériaux solides : utilisation d'essais et de calculs, Technologies et Formations, vol.100, p.3641, 2002.

G. Geymonat, F. Hild, and S. Pagano, Identication of elastic parameters by displacement eld measurement, C. R. Mécanique, vol.330, p.403408, 2002.

O. Allix, P. Feissel, and H. M. Nguyen, Identication strategy in the presence of corrupted measurements, Eng. Comput, vol.22, p.487504, 2005.

P. Feissel and O. Allix, Modied constitutive relation error identication strategy for transient dynamics with corrupted data: The elastic case

, Comput. Meth. Appl. Mech. Eng, issue.13, p.19681983, 2007.

S. Andrieux and A. Ben-abda, The reciprocity gap: a general concept for aws identication problems, Mech. Res. Comm, vol.20, issue.5, p.415420, 1993.

S. Andrieux, A. Ben-abda, and H. D. Bui, Reciprocity principle and crack identication, Inverse Problems, vol.15, p.5965, 1999.

S. Andrieux, H. D. Bui, and A. Constantinescu, Reciprocity Gap Method, p.363378, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00762187

M. Grédiac, Principe des travaux virtuels et identication, C. R. Acad Sci, vol.309, p.15, 1989.

M. Grédiac, The use of full-eld measurement methods in composite material characterization: interest and limitations, Composites: Part A, vol.35, p.751761, 2004.

F. Pierron and M. Grédiac, The Virtual Fields Method
URL : https://hal.archives-ouvertes.fr/hal-01024762

D. Claire, F. Hild, and S. Roux, Identication of damage elds using kinematic measurements, C.R. Mécanique, vol.330, p.729734, 2002.

D. Claire, F. Hild, and S. Roux, A nite element formulation to identify damage elds: The equilibrium gap method, Int. J. Num. Meth. Engng, vol.61, issue.2, p.189208, 2004.

S. Roux and F. Hild, Digital image mechanical identication (DIMI)

, Exp. Mech, vol.48, issue.4, p.495508, 2008.

L. Crouzeix, J. N. Périé, F. Collombet, and B. Douchin, An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material, Composites: Part A, vol.40, issue.11, p.17321740, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01924042

J. N. Périé, H. Leclerc, S. Roux, and F. Hild, Digital image correlation and biaxial test on composite material for anisotropic damage law identication, Int. J. Solids Struct, vol.46, p.23882396, 2009.

S. Avril, M. Grédiac, and F. Pierron, Sensitivity of the virtual elds method to noisy data, Comput. Mech, vol.34, issue.6, p.439452, 2004.

J. Réthoré, S. Roux, and F. Hild, Optimal and noise-robust extraction of fracture mechanics parameters from kinematic measurements, Eng. Fract. Mech, vol.78, issue.9, p.18271845, 2011.

F. Amiot, F. Hild, and J. P. Roger, Identication of elastic property and loading elds from full-eld displacement measurements, Int. J. Solids Struct, vol.44, p.28632887, 2007.

R. Gras, H. Leclerc, F. Hild, S. Roux, and J. Schneider, Identication of a set of macroscopic elastic parameters in a 3d woven composite: Uncertainty analysis and regularization, Int. J. Solids Struct, vol.55, p.216, 2015.

F. Mathieu, H. Leclerc, F. Hild, and S. Roux, Estimation of elastoplastic parameters via weighted FEMU and integrated-DIC, Exp. Mech, vol.55, issue.1, p.105119, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166755

T. Kirchdoerfer and M. Ortiz, Data-driven computational mechanics, Comput. Meth. Appl. Mech. Eng, vol.304, p.81101, 2016.

A. Leygue, M. Coret, J. Réthoré, L. Stainier, and E. Verron, Databased derivation of material response, Compu. Meth. Appl. Mech. Eng, vol.331, p.184196, 2018.

J. Neggers, F. Mathieu, F. Hild, S. Roux, and N. Swiergiel, Improving full-eld identication using progressive model enrichments, Int. J. Solids Struct, p.213223, 2017.

O. C. Zienkiewicz and J. Z. Zhu, A simple error estimator and adaptive procedure for practical engineering analysis, Int. J. Num. Meth. Eng, vol.24, issue.2, p.337357, 1987.

O. C. Zienkievicz and R. L. Taylor, The Finite Element Method, 1989.

B. Szabó and I. Babu²ka, Introduction to nite element analysis: formulation, verication and validation, 2011.

. Iso, Guide to the Expression of Uncertainty in Measurements (GUM), 1995.

. Iso/iec, International Vocabulary of Metrology-Basic and General Concepts and Associated Terms, VIM. International Organization for Standardization, pp.99-111, 2007.

, Topics in Applied Physics, vol.77, 2000.

P. Rastogi and E. Hack, Optical Methods for Solid Mechanics. A Full-Field Approach, 2012.

F. Hild and S. Roux, Digital Image Correlation, p.183228, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00848729

J. Réthoré, S. Roux, and F. Hild, An extended and integrated digital image correlation technique applied to the analysis fractured samples

, Eur. J. Comput. Mech, vol.18, p.285306, 2009.

Z. Tomi£evi¢, F. Hild, and S. Roux, Mechanics-aided digital image correlation, J. Strain Analysis, vol.48, p.330343, 2013.

M. Ben-azzouna, P. Feissel, and P. Villon, Robust identication of elastic properties using the Modied Constitutive Relation Error, Comput. Meth. Appl. Mech. Eng, vol.295, 2015.

S. Huang, P. Feissel, and P. Villon, Modied constitutive relation error: An identication framework dealing with the reliability of information

, Comput. Meth. Appl. Mech. Eng, vol.311, p.117, 2016.

M. T. Nair, E. Schock, and U. Tautenhahn, Morozov's discrepancy principle under general source conditions, J. Anal. Appl, vol.22, issue.1, 2003.

K. Miller, Least squares methods for ill-posed problems with a prescribed bound, SIAM J. Math. Analysis, vol.1, p.5274, 1970.

M. Grédiac, F. Pierron, S. Avril, and E. Toussaint, The virtual elds method for extracting constitutive parameters from full-eld measurements: a review, Strain, vol.42, issue.4, p.233253

A. Marek, F. M. Davis, and F. Pierron, Sensitivity-based virtual elds for the non-linear virtual elds method, Comput. Mech, vol.60, issue.3, p.409431, 2017.

J. E. Mottershead, M. Link, and M. I. Friswell, The sensitivity method in nite element model updating: A tutorial, Mech. Syst. & Signal Proc, vol.25, issue.7, p.22752296, 2011.

F. Hild and S. Roux, Comparison of local and global approaches to digital image correlation, Exp. Mech, vol.52, issue.9, p.15031519, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00750756

P. C. Mahalanobis, On the generalised distance in statistics, Proceedings National Institute of Science, vol.2, p.4955, 1936.

Y. Sun, J. Pang, C. Wong, and F. Su, Finite-element formulation for a digital image correlation method, Appl. Optics, vol.44, issue.34, p.73577363, 2005.

G. Besnard, F. Hild, and S. Roux, Finite-element displacement
URL : https://hal.archives-ouvertes.fr/hal-00124513

, elds analysis from digital images: Application to Portevin-Le Chatelier bands, Exp. Mech, vol.46, p.789803, 2006.

F. Mathieu, P. Aimedieu, J. M. Guimard, and F. Hild, Identication of interlaminar fracture properties of a composite laminate using local full-eld kinematic measurements and nite element simulations, Comp. Part A, vol.49, p.203213, 2013.

H. Leclerc, J. N. Périé, S. Roux, and F. Hild, Integrated digital image correlation for the identication of mechanical properties, LNCS, vol.5496, p.161171, 2009.

M. Bertin, F. Hild, S. Roux, F. Mathieu, H. Leclerc et al., Integrated digital image correlation applied to elasto-plastic identication in a biaxial experiment, J. Strain Anal, vol.51, issue.2, p.118131, 2016.

D. Lindner, F. Mathieu, F. Hild, O. Allix, C. H. Minh et al., On the evaluation of stress triaxiality elds in a notched titanium alloy sample via integrated DIC, J. Appl. Mech, vol.82, issue.7, p.71014, 2015.

M. Bertin, C. Du, J. P. Hoefnagels, and F. Hild, Crystal plasticity parameter identication with 3D measurements and Integrated Digital Image Correlation, Acta Mat, vol.116, pp.321-331, 2016.

S. Roux, J. Réthoré, and F. Hild, Digital image correlation and fracture: An advanced technique for estimating stress intensity factors of 2d and 3d cracks, J. Phys. D: Appl. Phys, vol.42, p.214004, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00381646