R. S. Pierce, B. G. Falzon, and M. C. Thompson, A multi-physics process model for simulating the manufacture of resin-infused composite aerostructures, Compos. Sci. Technol, vol.149, pp.269-279, 2017.

P. Harrison, Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh, Compos. Part A Appl. Sci. Manuf, vol.81, pp.145-157, 2016.

P. Harrison, M. F. Alvarez, and D. Anderson, In press. Towards comprehensive characterisation and modelling of the forming and wrinkling mechanics of engineering fabrics, Int. J. Solids. Struct

W. R. Yu, F. Pourboghrat, K. Chung, M. Zampaloni, and T. J. Kang, Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites, Compos. Part A Appl. Sci. Manuf, vol.33, pp.1095-1105, 2002.

P. Harrison, W. R. Yu, and A. C. Long, Rate dependent modelling of the forming behaviour of viscous textile composites, Compos. Part A Appl. Sci. Manuf, vol.42, pp.1719-1726, 2011.

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, Int. J. Mater. Form, vol.3, pp.1241-1251, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00495110

S. Gatouillat, A. Bareggi, E. Vidal-sallé, and P. Boisse, Meso modelling for composite preform shaping-simulation of the loss of cohesion of the woven fibre network, Compos. Part A Appl. Sci. Manuf, vol.54, pp.135-144, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00934559

F. Dell'isola, P. Seppecher, and A. Madeo, How contact interactions may depend on the shape of Cauchy cuts in Nth gradient continua: approach "à la D'Alembert, Z. Angew. Math. Phys, vol.63, pp.1119-1141, 2012.

D. J. Steigmann and A. C. Pipkin, Equilibrium of elastic nets, Phil. Trans. R. Soc. Lond. A, vol.335, pp.419-454, 1991.

L. Placidi, L. Greco, S. Bucci, E. Turco, and N. L. Rizzi, A second gradient formulation for a 2D fabric sheet with inextensible fibres, Z. Angew. Math. Phys, vol.67, p.24, 2016.

D. J. Steigmann, Equilibrium of elastic lattice shells, J. Eng. Math, vol.109, pp.47-61, 2017.

I. Giorgio, N. L. Rizzi, and E. Turco, Continuum modelling of pantographic sheets for outof-plane bifurcation and vibrational analysis, Proc. R. Soc. A, vol.473, 2017.

F. Dell'isola, D. Corte, A. , and G. I. , Higher-gradient continua: The legacy of Piola, Mindlin, Sedov and Toupin and some future research perspectives, Math. Mech. Solids, vol.22, pp.852-872, 2017.

A. Bertram and R. Glüge, Gradient materials with internal constraints, Math. Mech. Complex Syst, vol.4, pp.1-15, 2016.

D. Scerrato, Z. Eremeeva, I. A. Lekszycki, T. Rizzi, and N. L. , On the effect of shear stiffness on the plane deformation of linear second gradient pantographic sheets, Z. Angew. Math. Mech, vol.96, pp.1268-1279, 2016.

. , rspa.royalsocietypublishing.org Proc. R. Soc

A. Misra, R. Parthasarathy, V. Singh, and P. Spencer, Micro-poromechanics model of fluidsaturated chemically active fibrous media, Z. Angew. Math. Mech, vol.95, pp.215-234, 2015.

G. Chatzigeorgiou, A. Javili, and P. Steinmann, Multiscale modelling for composites with energetic interfaces at the micro-or nanoscale, Math. Mech. Solids, vol.20, pp.1130-1145, 2015.

J. Altenbach, H. Altenbach, and V. A. Eremeyev, On generalized Cosserat-type theories of plates and shells: a short review and bibliography, Arch. Appl. Mech, vol.80, pp.73-92, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00827365

H. Altenbach, V. A. Eremeyev, L. Lebedev, . Altenbach, and . Ga-maugin, Micropolar shells as two-dimensional generalized continua models, Mechanics of generalized continua, vol.7, pp.23-55, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00824010

D. J. Steigmann and F. Isola, Mechanical response of fabric sheets to three-dimensional bending, twisting, and stretching, Acta Mech. Sin, vol.31, pp.373-382, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01198464

F. Dell'isola, G. I. Pawlikowski, M. Rizzi, and N. L. , Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium, Proc. R. Soc. A, vol.472, 2016.

L. Placidi, U. Andreaus, D. Corte, A. Lekszycki, and T. , Gedanken experiments for the determination of two-dimensional linear second gradient elasticity coefficients, Z. Angew. Math. Mech, vol.66, pp.3699-3725, 2015.

A. Misra and P. Poorsolhjouy, Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics, Math. Mech. Complex Syst, vol.3, pp.285-308, 2015.

B. E. Abali, C. C. Wu, and W. H. Müller, An energy-based method to determine material constants in nonlinear rheology with applications, Continuum Mech. Thermodyn, vol.28, pp.1221-1246, 2016.

C. Pideri and P. Seppecher, A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium, Continuum Mech. Thermodyn, vol.9, pp.241-257, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00527291

L. Placidi, E. Barchiesi, D. Corte, and A. , Identification of two-dimensional pantographic structures with a linear D4 orthotropic second gradient elastic model accounting for external bulk double forces, Mathematical modelling in solid mechanics (eds F dell'Isola, M Sofonea, D Steigmann), vol.69, pp.211-232, 2017.

S. B. Sharma and M. Sutcliffe, A simplified finite element model for draping of woven material, Compos. Part A Appl. Sci. Manuf, vol.35, pp.637-643, 2004.

P. Boisse, N. Hamila, E. Vidal-sallé, and F. Dumont, Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses, Compos. Sci. Technol, vol.71, pp.683-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00578046

B. Liang, N. Hamila, M. Peillon, and P. Boisse, Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations, Compos. Part A Appl. Sci. Manuf, vol.67, pp.111-122, 2014.

F. Härtel and P. Harrison, Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics, Compos. Part A Appl. Sci. Manuf, vol.67, pp.61-69, 2014.

J. Alsayednoor, F. Lennard, W. Yu, and P. Harrison, Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results, Compos. Part A Appl. Sci. Manuf, vol.101, pp.81-97, 2017.

P. Harrison, F. Abdiwi, Z. Guo, P. Potluri, and W. Yu, Characterising the shear-tension coupling and wrinkling behaviour of woven engineering fabrics, Compos. Part A Appl. Sci. Manuf, vol.43, pp.903-914, 2012.

J. Hu, Computer technology for textiles and apparel, 2011.

S. Lomov, A. Gusakov, G. Huysmans, A. Prodromou, and I. Verpoest, Textile geometry preprocessor for meso-mechanical models of woven composites, Compos. Sci. Technol, vol.60, pp.2083-2095, 2000.

. , Proc. R. Soc. A, vol.474, 20180063.

R. S. Pierce, B. G. Falzon, M. C. Thompson, and R. Boman, A low-cost digital image correlation technique for characterising the shear deformation of fabrics for draping studies, Strain, vol.51, pp.180-189, 2015.

X. Peng and J. Cao, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Compos. Part A Appl. Sci. Manuf, vol.36, pp.859-874, 2005.

C. Boutin, F. Isola, G. I. Placidi, and L. , Linear pantographic sheets: Asymptotic micro-macro models identification, Math. Mech. Complex Syst, vol.5, pp.127-162, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01494280

V. A. Eremeyev, F. Isola, C. Boutin, and D. Steigmann, Linear pantographic sheets: existence and uniqueness of weak solutions, J. Elast, vol.13, pp.1-22, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01466979

J. J. Alibert, D. Corte, and A. , Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof, Z. Angew. Math. Phys, vol.66, pp.2855-2870, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01279491

I. Giorgio, R. Grygoruk, F. Dell'isola, and D. J. Steigmann, Pattern formation in the threedimensional deformations of fibered sheets, Mech. Res. Commun, vol.69, pp.164-171, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01194318

I. Giorgio, D. Corte, A. Isola, F. Steigmann, and D. J. , Buckling modes in pantographic lattices, C. R. Mécanique, vol.344, pp.487-501, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01294032

D. Scerrato, G. I. Rizzi, and N. L. , Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations, Z. Angew. Math. Phys, vol.67, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01305927

E. Turco, M. Golaszewski, G. I. D'annibale, and F. , Pantographic lattices with nonorthogonal fibres: experiments and their numerical simulations, Compos. Part B Eng, vol.118, pp.1-14, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01443679

R. W. Ogden, Non-linear elastic deformations, 1997.

C. Polizzotto, A note on the higher order strain and stress tensors within deformation gradient elasticity theories: Physical interpretations and comparisons, Int. J. Solids Struct, vol.90, pp.116-121, 2016.

J. J. Alibert, P. Seppecher, and F. Dell'isola, Truss modular beams with deformation energy depending on higher displacement gradients, Math. Mech. Solids, vol.8, pp.51-73, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00497327

D. Agostino, M. V. , G. I. Greco, L. Madeo, A. Boisse et al., Continuum and discrete models for structures including (quasi-) inextensible elasticae with a view to the design and modeling of composite reinforcements, Int. J. Solids Struct, vol.59, pp.1-17, 2015.

F. Dell'isola, D. Corte, A. , G. I. Scerrato, and D. , Pantographic 2D sheets: discussion of some numerical investigations and potential applications, Int. J. Non Linear Mech, vol.80, pp.200-208, 2016.

T. Hughes, K. S. Pister, and R. L. Taylor, Implicit-explicit finite elements in nonlinear transient analysis, Comput. Methods. Appl. Mech. Eng, vol.17, pp.159-182, 1979.