Y. Altintas, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Calibrations, and CNC Design, 2000.

P. Hu, L. Chen, and K. Tang, Efficiency-optimal iso-planar tool path generation for five-axis finishing machining of freeform surfaces, Computer-Aided Design, vol.83, pp.33-50, 2017.

J. Huang, X. Du, and L. M. Zhu, Real-time local smoothing for fiveaxis linear tool-path considering smoothing error constraints, International Journal of Machine Tools and Manufacture, vol.124, pp.67-79, 2018.
DOI : 10.1016/j.ijmachtools.2017.10.001

K. Erkorkmaz, Q. Chen, M. Y. Zhao, X. Beudaert, . Gao et al., Linear programming and windowing based feedrate optimization for spline toolpaths, CIRP Annals, vol.66, issue.1, pp.393-396, 2017.

Y. Altintas, P. Kersting, D. Biermann, E. Budak, B. Denkena et al., Virtual process systems for part machining operations, CIRP Annals, vol.63, issue.2, pp.585-605, 2014.
DOI : 10.1016/j.cirp.2014.05.007

Y. Altintas, K. Erkorkmaz, and W. H. Zhu, Sliding Mode Controller Design for High Speed Feed Drives, CIRP Annals-Manufacturing Technology, vol.49, issue.1, pp.265-270, 2000.
DOI : 10.1016/s0007-8506(07)62943-6

K. Erkorkmaz and Y. Altintas, High speed CNC system design. Part III: high speed tracking and contouring control of feed drives, International Journal of Machine Tools and Manufacture, vol.41, issue.11, pp.1637-1658, 2001.

D. Dumur, M. Susanu, and M. Aubourg, Complex form machining with axis drive predictive control, CIRP Annals-Manufacturing Technology, vol.57, issue.1, p.399402, 2008.
DOI : 10.1016/j.cirp.2008.03.061
URL : https://hal.archives-ouvertes.fr/hal-00293350

L. Tang and R. G. Landers, Multiaxis Contour Control-the State of the Art, IEEE Transactions on Control Systems Technology, vol.21, issue.6, pp.1997-2010, 2013.

Y. Koren and C. C. Lo, Variable-Gain Cross-Coupling Controller for Contouring, CIRP Annals-Manufacturing Technology, vol.40, issue.1, pp.371-374, 1991.
DOI : 10.1016/s0007-8506(07)62009-5

G. C. Chiu and M. Tomizuka, Contouring control of machine tool feed drive systems: a task coordinate frame approach, IEEE Transaction on Control System Technology, vol.9, issue.1, pp.130-139, 2011.
DOI : 10.1109/87.896754

Y. Altintas and B. Sencer, High speed contouring control strategy for five-axis machine tools, CIRP Annals-Manufacturing Technology, vol.59, issue.1, pp.417-420, 2010.
DOI : 10.1016/j.cirp.2010.03.019

J. Yang and Y. Altintas, A generalized on-line estimation and control of five-axis contouring errors of CNC machine tools, International Journal of Machine Tools and Manufacture, vol.88, pp.9-23, 2015.

M. Y. Cheng and K. H. Su, Contouring accuracy improvement using a tangential contouring controller with a fuzzy logic-based feedrate regulator, The International Journal of Advanced Manufacturing Technology, vol.41, issue.1, pp.75-85, 2009.
DOI : 10.1007/s00170-008-1463-z

M. A. El-khalick and N. Uchiyama, Discrete-time model predictive contouring control for biaxial feed drive systems and experimental verification, Mechatronics, vol.21, issue.6, pp.918-926, 2011.

S. Yang, A. H. Ghasemi, X. Lu, and C. E. Okwudire, Precompensation of servo contour errors using a model predictive control framework, International Journal of Machine Tools and Manufacture, vol.98, pp.50-60, 2015.
DOI : 10.1016/j.ijmachtools.2015.08.002

K. Erkorkmaz, C. H. Yeung, and Y. Altintas, Virtual CNC system. Part II. High speed contouring application, International Journal of Machine Tools and Manufacture, vol.46, issue.10, pp.1124-1138, 2006.

M. R. Khoshdarregi, S. Tappe, and Y. Altintas, Integrated FiveAxis Trajectory Shaping and Contour Error Compensation for HighSpeed CNC Machine Tools, IEEE/ASME Transactions on Mechatronics, vol.19, issue.6, pp.1859-1871, 2014.
DOI : 10.1109/tmech.2014.2307473

K. Zhang, A. Yuen, and Y. Altintas, Pre-compensation of contour errors in five-axis CNC machine tools, International Journal of Machine Tools and Manufacture, vol.74, pp.1-11, 2013.
DOI : 10.1016/j.ijmachtools.2013.07.003

A. Y. Jaen-cuellar, J. Romero-troncoso-r-de, L. Morales-velazquez, and O. Ra, Pid-controller tuning optimization with genetic algorithms in servo systems, International Journal of Advanced Robotic Systems, vol.10, issue.324, pp.1-14, 2013.
DOI : 10.5772/56697
URL : https://doi.org/10.5772/56697

L. Flohic, J. Paccot, F. Bouton, N. Chanal, and H. , Model-based method for feed drive tuning applied to serial machine tool. The International, Journal of Advanced Manufacturing Technology, vol.95, issue.14, pp.735-745, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01653345

M. Susanu and D. Dumur, Hierarchical Predictive Control within an Open Architecture Virtual Machine Tool, CIRP AnnalsManufacturing Technology, vol.55, issue.1, pp.389-392, 2006.
DOI : 10.1016/s0007-8506(07)60442-9
URL : https://hal.archives-ouvertes.fr/hal-00261322

D. Prévost, S. Lavernhe, C. Lartigue, and D. Dumur, Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining, International Journal of Mechatronics and Manufacturing Systems, vol.4, issue.3-4, pp.266-284, 2011.

X. Beudaert, S. Lavernhe, and C. Tournier, Direct trajectory interpolation on the surface using an open CNC, The International Journal of Advanced Manufacturing Technology, vol.75, issue.1, pp.535-546, 2014.
DOI : 10.1007/s00170-014-6134-7
URL : https://hal.archives-ouvertes.fr/hal-01055090

T. Q. Duong, P. Rodriguez-ayerbe, S. Lavernhe, C. Tournier, and D. Dumur, Offline gain adjustment with constraints for contour error reduction in high speed milling, IEEE International Conference on Advanced Intelligent Mechatronics, pp.201-206, 2016.
DOI : 10.1109/aim.2016.7576767
URL : https://hal.archives-ouvertes.fr/hal-01365977

T. Q. Duong, P. Rodriguez-ayerbe, S. Lavernhe, C. Tournier, and D. Dumur, Receding Horizon Based Offline Gain Adjustment for Contour Error Reduction in High Speed Milling, Procedia CIRP-10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, vol.62, pp.227-232, 2016.
DOI : 10.1016/j.procir.2016.06.040
URL : https://hal.archives-ouvertes.fr/hal-01365979

C. Tournier and E. Duc, Iso-scallop tool path generation in 5axis milling, The International Journal of Advanced Manufacturing Technology, vol.25, issue.9, pp.867-875, 2005.
DOI : 10.1007/s00170-003-2054-7
URL : https://hal.archives-ouvertes.fr/hal-01076659

G. Pritschow, On the Influence of the Velocity Gain Factor on the Path Deviation, CIRP Annals-Manufacturing Technology, vol.45, issue.1, pp.367-371, 1996.

E. D. Tung and M. Tomizuka, Feedforward Tracking Controller Design Based on the Identification of Low Frequency Dynamics, ASME Journal of Dynamic Systems, Measurement, and Control, vol.115, issue.3, pp.348-356, 1993.

G. W. Younkin, Industrial servo control systems: Fundamentals and applications, 2003.
DOI : 10.1201/9780203909454

E. F. Camacho, B. Alba, and C. , , 2013.

J. M. Maciejowski, Predictive control with constraints, 2002.

X. Beudaert, S. Lavernhe, and C. Tournier, Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path, International Journal of Machine Tools and Manufacture, vol.57, pp.73-82, 2012.
DOI : 10.1016/j.ijmachtools.2012.02.005
URL : https://hal.archives-ouvertes.fr/hal-00679118

. Siemens, Siemens Configuration Manual Simodrive 611 / Masterdrives MC, 1FT6 Synchronous Motors, Manual, pp.144-145, 2005.