, European Commission, 2016.

, Bâtiments et villes durables

B. Déchets-du, , 2012.

A. Shea, M. Lawrence, and P. Walker, Hygrothermal performance of an experimental 708 hemp-lime building, Constr. Build. Mater, vol.36, pp.270-275, 2012.

Y. Millogo, J. Morel, J. Aubert, and K. Ghavami, Experimental analysis of
URL : https://hal.archives-ouvertes.fr/hal-01850750

, Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers, Constr. Build

. Mater, , vol.52, pp.71-78, 2014.

M. Labat, C. Magniont, N. Oudhof, and J. Aubert, From the experimental 713 characterization of the hygrothermal properties of straw-clay mixtures to the numerical 714 assessment of their buffering potential, Build. Environ, vol.97, pp.69-81, 2016.

K. Al-rim, A. Ledhem, O. Douzane, R. M. Dheilly, and M. Queneudec, Influence of the 716 proportion of wood on the thermal and mechanical performances of clay-cement-wood 717 composites, Cem. Concr. Compos, vol.21, issue.4, pp.269-276, 1999.

J. Aubert, A. Marcom, P. Oliva, and P. Segui, Chequered earth construction in 757 south-western France, J. Cult. Herit, vol.16, issue.3, pp.293-298

E. Quagliarini and S. Lenci, The influence of natural stabilizers and natural fibres on 759 the mechanical properties of ancient Roman adobe bricks, J. Cult. Herit, vol.11, issue.3, pp.760-309, 2010.

T. Ashour, H. Wieland, H. Georg, F. Bockisch, and W. Wu, The influence of natural 762 reinforcement fibres on insulation values of earth plaster for straw bale buildings

, Mater. Des, vol.31, issue.10, pp.4676-4685, 2010.

L. Turanli and A. Saritas, Strengthening the structural behavior of adobe walls through 765 the use of plaster reinforcement mesh, Constr. Build. Mater, vol.25, issue.4, pp.1747-766, 2011.

?. Yetgin, Ö. Çavdar, and A. Çavdar, The effects of the fiber contents on the mechanic 768 properties of the adobes, Constr. Build. Mater, vol.22, issue.3, pp.222-227, 2008.

M. Bouhicha, F. Aouissi, and S. Kenai, Performance of composite soil reinforced with 770 barley straw, Cem. Concr. Compos, vol.27, issue.5, pp.617-621, 2005.

P. Faria, T. Santos, and J. Aubert, Experimental characterization of an earth eco772 efficient plastering mortar, J. Mater. Civ. Eng, vol.28, issue.1, 2016.

. Nomadéis, Etude sur le secteur et les filières de production des matériaux et produits 774 bio-sourcés utilisés dans la construction, 2012.

C. Magniont, Contribution à la formulation et à la caractérisation d'un écomatériau de 776 construction à base d'agroressources, PhD dissertation in Civil Engieneering, p.777

V. Cerezo, Propriétés mécaniques, thermiques et acoustiques d'un matériau à base de 779 particules végétales: approche expérimentale et modélisation théorique, 2005.

C. Flament, Valorisation de fines de lavage de granulats : application à la construction 782 en terre crue, 2013.

E. Hamard, J. Morel, F. Salgado, A. Marcom, and N. Meunier, A procedure to 784 assess the suitability of plaster to protect vernacular earthen architecture, J. Cult

. Herit, , vol.14, pp.109-115, 2013.

J. Pinto, Corn's cob as a potential ecological thermal insulation material, Energy 787 Build, vol.43, issue.8, 1985.

S. Amziane, F. Collet, M. Lawrence, C. Magniont, and V. Picandet, Round robin test for 795 hemp shiv characterisation, Bio-aggregates based building materials-State-of-the

F. Amziane and . Collet, , 2017.

, Statistical pocketbook-World food and agriculture, 2015.

. Agreste, Statistique agricole annuelle, 2014.

D. Jölli and S. Giljum, Unused biomass extraction in agriculture, forestry and fishery

]. Fcba and . Mémento, , 2015.

V. Picandet, Characterization of Plant-Based Aggregates

M. Chabannes, V. Nozahic, and S. Amziane, Design and multi-physical properties of a 807 new insulating concrete using sunflower stem aggregates and eco-friendly binders

, Mater. Struct, vol.48, issue.6, pp.1815-1829, 2015.

V. Nozahic, S. Amziane, G. Torrent, K. Saïdi, and H. De-baynast, Design of green 810 concrete made of plant-derived aggregates and a pumice-lime binder, Cem. Concr

, Compos, vol.34, issue.2, pp.231-241, 2012.

M. Chabannes, J. Bénézet, L. Clerc, and E. Garcia-diaz, Use of raw rice husk as 813 natural aggregate in a lightweight insulating concrete: An innovative application

, Constr. Build. Mater, vol.70, pp.428-438, 2014.

A. , NF V18-122-Aliments des animaux-Détermination séquentielle des 816 constituants pariétaux-Méthode par traitement aux détergents neutre et acide et à

F. Mcgregor, A. Heath, E. Fodde, and A. Shea, Conditions affecting the moisture 819 buffering measurement performed on compressed earth blocks, Build. Environ, vol.820, issue.75, pp.11-18, 2014.

C. Feng, H. Janssen, Y. Feng, and Q. Meng, Hygric properties of porous building 822 materials: Analysis of measurement repeatability and reproducibility, Build. Environ, vol.823, pp.160-172, 2015.

R. Bui, M. Labat, and J. Aubert, Comparison of the Saturated Salt Solution and the
URL : https://hal.archives-ouvertes.fr/hal-01708203

H. Cagnon, J. E. Aubert, M. Coutand, and C. Magniont, Hygrothermal properties of 830 earth bricks, Energy Build, vol.80, pp.208-217, 2014.
DOI : 10.1016/j.enbuild.2014.05.024

, Exécution d'ouvrages en bétons de chanvre : mur 832 en béton de chanvre, isolation de sol en béton de chanvre, isolation de toiture en béton 833 de chanvre, enduits en mortier de chanvre (Règles professionnelles), 2012.

J. Pinto, Characterization of corn cob as a possible raw building material

, Build. Mater, vol.34, pp.28-33, 2012.

T. T. Nguyen, Contribution à l'étude de la formulation et du procédé de fabrication 838 d'éléments de construction en béton de chanvre, p.839

H. Danso, D. B. Martinson, M. Ali, and J. Williams, Effect of fibre aspect ratio on 841 mechanical properties of soil building blocks, Constr. Build. Mater, vol.83, p.319, 2015.

H. Binici, O. Aksogan, M. N. Bodur, E. Akca, and S. Kapur, Thermal isolation and 844 mechanical properties of fibre reinforced mud bricks as wall materials, Constr. Build

. Mater, , vol.21, pp.901-906, 2007.

M. Bouasker, N. Belayachi, D. Hoxha, and M. Al-mukhtar, Physical characterization of 847 natural straw fibers as aggregates for construction materials applications, Materials, vol.848, issue.4, pp.3034-3048, 2014.

B. Belhadj, M. Bederina, Z. Makhloufi, A. Goullieux, and M. Quéneudec, Study of the 850 thermal performances of an exterior wall of barley straw sand concrete in an arid 851 environment, Energy Build, vol.87, pp.166-175, 2015.

T. Verdier, C. Magniont, and G. Escadeillas, Valorisation de granulats végétaux dans 853 un matériau de construction à matrice minérale, 2012.

. Eurocob, Product specifications, EU-GRITS 8/10, 2003.

S. Goodhew and R. Griffiths, Sustainable earth walls to meet the building regulations, 857 Energy Build, vol.37, issue.5, pp.451-459, 2005.

D. Maskell, Properties of bio-based insulation materials and their potential impact 859 on indoor air quality

, Building Materials, Clermont-Ferrand, 2015.

D. Molle and P. Patry, RT 2012 et RT Existant: réglementation thermique et

M. Segetin, K. Jayaraman, and X. Xu, Harakeke reinforcement of soil-cement building 867 materials: Manufacturability and properties, Build. Environ, vol.42, issue.8, pp.3066-868, 2007.

W. Banks, Water uptake by scots pine sapwood, and its restriction by the use of water 870 repellents, Wood Sci. Technol, vol.7, pp.271-284, 1973.

C. Groot and J. Larbi, The influence of water flow (reversal) on bond strength 872 development in young masonry, Heron, vol.44, issue.2, 1999.

H. M. Algin and P. Turgut, Cotton and limestone powder wastes as brick material
DOI : 10.1016/j.conbuildmat.2007.03.006

, Constr. Build. Mater, vol.22, issue.6, pp.1074-1080, 2008.

A. Mohanty, M. Misra, and L. Drzal, Natural Fibers, Biopolymers, and Biocomposites, vol.876, 2005.

S. V. Vassilev, D. Baxter, L. K. Andersen, C. G. Vassileva, and T. J. Morgan, An 878 overview of the organic and inorganic phase composition of biomass, Fuel, vol.94

D. Mohnen, Pectin structure and biosynthesis, Curr. Opin. Plant Biol, vol.11, issue.3, pp.881-266, 2008.

Y. Diquélou, E. Gourlay, L. Arnaud, and B. Kurek, Impact of hemp shiv on cement 883 setting and hardening: Influence of the extracted components from the aggregates and 884 study of the interfaces with the inorganic matrix, Cem. Concr. Compos, vol.55, pp.885-112, 2015.

D. Sedan, C. Pagnoux, A. Smith, and T. Chotard, Mechanical properties of hemp fibre 887 reinforced cement: Influence of the fibre/matrix interaction, J. Eur. Ceram. Soc, vol.28, issue.1, pp.183-192, 2008.

F. Jorge, C. Pereira, and J. Ferrera, Wood-cement composites: a review

. Werkst, , pp.370-377, 2008.

B. Na, Z. Wang, H. Wang, and X. Lu, Wood-cement compatibility review, Wood Res, vol.892, issue.59, pp.813-826, 2014.

A. Govin, A. Peschard, and R. Guyonnet, Modification of cement hydration at early 894 ages by natural and heated wood, Cem. Concr. Compos, vol.28, issue.1, pp.12-20

M. Irle and H. Simpson, Agricultural residues for cement-bonded composites, 900 presented at the Moslemi A (ed) Inorganic-Bonded Wood and Fiber Composite Material 901 Conference Proceedings, vol.5, pp.54-58, 1996.

E. Eusebio and M. Suzuki, Production and properties of plant materials cement bonded 903 composites, Bull. Exp. For. Lab. Tokyo Univ. Agric. Technol, p.27, 1990.

P. Soroushian, F. Aouadi, H. Chowdhury, A. Nossoni, and G. Sarwar, Cement-bonded 905 straw board subjected to accelerated processing, Cem. Concr. Compos, vol.26, issue.7, pp.906-797, 2004.

L. K. Aggarwal, S. P. Agrawal, P. C. Thapliyal, and S. R. Karade, Cement-bonded 908 composite boards with arhar stalks, Cem. Concr. Compos, vol.30, issue.1, pp.44-51

K. Bilba, M. Arsene, and A. Ouensanga, Sugar cane bagasse fibre reinforced 911 cement composites. Part I. Influence of the botanical components of bagasse on the 912 setting of bagasse/cement composite, Cem. Concr. Compos, vol.25, issue.1, pp.91-96

G. A. Brasileiro, J. A. Vieira, and L. S. Barreto, Use of coir pith particles in 915 composites with Portland cement, J. Environ. Manage, vol.131, pp.228-238, 2013.

P. Boustingorry, P. Grosseau, R. Guyonnet, and B. Guilhot, The influence of wood 918 aqueous extractives on the hydration kinetics of plaster, Cem. Concr. Res, vol.35, issue.919, pp.2081-2086, 2005.

M. Ardanuy, J. Claramunt, and R. D. Toledo-filho, Cellulosic fiber reinforced cement921 based composites: A review of recent research, Constr. Build. Mater, vol.79, pp.115-922, 2015.

G. Bal?i?nas, S. V?jelis, S. Vaitkus, and A. Kairyt?, Modern building materials, 924 structures and techniques physical properties and structure of composite made by using 925 hemp hurds and different binding materials, Procedia Eng, vol.57, pp.159-166, 2013.

J. X. Sun, F. Xu, X. F. Sun, B. Xiao, and R. C. Sun, Physico-chemical and thermal 927 characterization of cellulose from barley straw, Polym. Degrad. Stab, vol.88, issue.3, pp.928-521, 2005.
DOI : 10.1016/j.polymdegradstab.2004.12.013

Z. Zhu, S. S. Toor, L. Rosendahl, D. Yu, and G. Chen, Influence of alkali catalyst on 930 product yield and properties via hydrothermal liquefaction of barley straw, Energy, vol.931, pp.284-292, 2015.

. La-chanvrière-de-l'aube, Kanabat, technical document, Biomass Bioenergy, vol.14, issue.3, pp.251-260, 1998.

M. R. Vignon, D. Dupeyre, and C. Garcia-jaldon, IEA Network-Biotechnology for the 940 conversion of lignocellulosics morphological characterization of steam-exploded hemp 941 fibers and their utilization in polypropylene-based composites, Bioresour. Technol, vol.942, issue.2, pp.203-215, 1996.

S. Gandolfi, G. Ottolina, S. Riva, G. P. Fantoni, and I. Patel, Complete chemical 944 analysis of carmagnola hemp hurds and structural features of its components
DOI : 10.15376/biores.8.2.2641-2656
URL : http://ojs.cnr.ncsu.edu/index.php/BioRes/article/download/BioRes_08_2_2641_Gandolfi_Carmagnola_Hemp_Hurds/2080

, BioResources, vol.8, issue.2, pp.2641-2656, 2013.

P. Velmurugan, Monascus pigment production by solid-state fermentation with 947 corn cob substrate, J. Biosci. Bioeng, vol.112, issue.6, pp.590-594, 2011.
DOI : 10.1016/j.jbiosc.2011.08.009

Y. Millogo, J. Aubert, E. Hamard, and J. Morel, How properties of kenaf fibers 949 from Burkina Faso contribute to the reinforcement of earth blocks, Materials, vol.8

V. A. Alvarez and A. Vázquez, Influence of fiber chemical modification procedure on 952 the mechanical properties and water absorption of MaterBi-Y/sisal fiber composites

, Compos. Part Appl. Sci. Manuf, vol.37, issue.10, pp.1672-1680, 2006.

H. Kymäläinen and A. Sjöberg, Flax and hemp fibres as raw materials for 955 thermal insulations, Build. Environ, vol.43, issue.7, pp.1261-1269, 2008.

F. Collet, M. Bart, L. Serres, and J. Miriel, Porous structure and water vapour sorption 957 of hemp-based materials, Constr. Build. Mater, vol.22, issue.6, pp.1271-1280, 2008.

C. A. Hill, A. Norton, and G. Newman, The water vapor sorption behavior of natural 960 fibers, J. Appl. Polym. Sci, vol.112, issue.3, pp.1524-1537, 2009.

M. Maddison, T. Mauring, K. Kirsimäe, and Ü. Mander, The humidity buffer capacity of 962 clay-sand plaster filled with phytomass from treatment wetlands, Build. Environ, vol.963, issue.9, pp.1864-1868, 2009.

T. Ashour, H. Georg, and W. Wu, An experimental investigation on equilibrium 965 moisture content of earth plaster with natural reinforcement fibres for straw bale 966 buildings, Appl. Therm. Eng, vol.31, issue.2-3, pp.293-303, 2011.

R. ?erný, A. Kunca, V. Tydlitát, J. Drchalová, and P. Rovnaníková, Effect of pozzolanic 968 admixtures on mechanical, thermal and hygric properties of lime plasters

, Build. Mater, vol.20, issue.10, pp.849-857, 2006.