Choosing the Optimal Multi-Point Iterative Method for the Colebrook Flow Friction Equation

Pavel Praks , Dejan Brkić (1)

1 JRC - European Commission - Joint Research Centre [Ispra]

The Colebrook equation is implicitly given in respect to the unknown flow friction factor λ; λ=ζ(Re,ε∗,λ) which cannot be expressed explicitly in exact way without simplifications and use of approximate calculus. A common approach to solve it is through the Newton–Raphson iterative procedure or through the fixed-point iterative procedure. Both require in some cases, up to seven iterations. On the other hand, numerous more powerful iterative methods such as three- or two-point methods, etc. are available. The purpose is to choose optimal iterative method in order to solve the implicit Colebrook equation for flow friction accurately using the least possible number of iterations. The methods are thoroughly tested and those which require the least possible number of iterations to reach the accurate solution are identified. The most powerful three-point methods require, in the worst case, only two iterations to reach the final solution. The recommended representatives are Sharma–Guha–Gupta, Sharma–Sharma, Sharma–Arora, Džunić–Petković–Petković; Bi–Ren–Wu, Chun–Neta based on Kung–Traub, Neta, and the Jain method based on the Steffensen scheme. The recommended iterative methods can reach the final accurate solution with the least possible number of iterations. The approach is hybrid between the iterative procedure and one-step explicit approximations and can be used in engineering design for initial rough, but also for final fine calculations

Domaines: Mathématiques [math]

Pavel Praks, Dejan Brkić. Choosing the Optimal Multi-Point Iterative Method for the Colebrook Flow Friction Equation. Processes, 2018, 6 (8), pp.130. ⟨10.3390/pr6080130⟩. ⟨hal-01864640⟩