J. Rosero, J. Ortega, E. Aldabas, and L. Romeral, Moving towards a more electric aircraft, IEEE Aerospace and Electronic Systems Magazine, vol.22, issue.3, 2007.
DOI : 10.1109/MAES.2007.340500

J. Hendershot and T. Miller, Design of Brushless Permanent-magnet Motors, 1995.

G. Long, Future directions in aeronautical composites In: 21st ICAS Congress, pp.1-19, 1998.

E. Gilson, D. John, and M. David, Moog next generation control and actuation, Recent Advances in Aerospace Actuation Systems and Components. Toulouse, pp.43-54, 2014.

D. Descamps, P. Alexandre, and D. Telteu-nedelcu, Hi-rel electromechanical thrust vector actuation systems for european unmanned launch vehicles a challenge for the next generation, Recent Advances in Aerospace Actuation Systems and Components. Toulouse; 2012, pp.11-16

H. Auweraer, J. Anthonis, S. Bruyne, and J. Leuridan, Virtual engineering at work: the challenges for designing mechatronic products, Engineering with Computers, vol.29, issue.3, pp.177-667, 2013.

B. Armaly, T. Chen, and N. Ramachandran, Correlations for laminar mixed convection on vertical, inclined and horizontal flat plates with uniform surface heat flux, International Journal of Heat and Mass Transfer, vol.30, issue.2, pp.405-413, 1987.
DOI : 10.1016/0017-9310(87)90129-3

S. Churchill and H. Ozoe, A Correlation for Laminar Free Convection From a Vertical Plate, Journal of Heat Transfer, vol.95, issue.4, pp.540-541, 1973.
DOI : 10.1115/1.3450105

S. Churchill and H. Chu, Correlating equations for laminar and turbulent free convection from a horizontal cylinder, International Journal of Heat and Mass Transfer, vol.18, issue.9, pp.1049-53, 1975.
DOI : 10.1016/0017-9310(75)90222-7

W. Minkowycz and E. Sparrow, Local non similar solutions for natural convection on a vertical cylinder, Journal of Heat Transfer, pp.178-83, 1974.

W. Rohsenow, J. Hartnett, and Y. Cho, Handbook of heat transfer, 1998.

M. Yovanovich, On the Effect of Shape, Aspect Ratio and Orientation upon natural Convection from Isothermal Bodies of Complex Shape, ASME Winter Annual Meeting, pp.121-130, 1987.

P. Del-barrio, E. Lefebvre, G. Behar, P. Bailly, and N. , Using model size reduction techniques for thermal control applications in buildings, Energy and Buildings, vol.33, issue.1, pp.1-14, 2000.
DOI : 10.1016/S0378-7788(00)00060-8

H. Raymond, D. Montgomery, and M. Christine, Response surface methodology : process and product optimization using designed experiments, 2006.

A. Forrester, A. Sóbester, and A. Keane, Engineering design via surrogate modelling: a practical guide, J, 2008.
DOI : 10.1002/9780470770801

D. Montgomery, Design and Analysis of Experiments

M. Budinger, J. Passieux, C. Gogu, and A. Fraj, Scaling-law-based metamodels for the sizing of mechatronic systems Mechatronics in press

G. West, The origin of allometric scaling laws in biology from genomes to ecosystems: towards a quantitative unifying theory of biological structure and organization, Journal of Experimental Biology, vol.208, issue.9, pp.1575-92, 2005.
DOI : 10.1242/jeb.01589

M. Budinger, J. Liscouët, F. Hospital, and J. Maré, Estimation Models for the Preliminary Design of Electro-Mechanical Actuators, Proceedings of the Institution of Mechanical Engineers, pp.243-59, 2012.

P. Mendez and F. Ordonez, Scaling Laws From Statistical Data and Dimensional Analysis, Journal of Applied Mechanics, vol.78, issue.5, pp.648-57, 2005.
DOI : 10.1016/S1359-6454(01)00352-4

URL : http://www-bcf.usc.edu/~fordon/docs/mendezordonez0904.pdf

G. Pahl, W. Beitz, J. Feldhusen, and K. Grote, Engineering Design: A Systematic Approach, 2007.

M. Petersheim and S. Brennan, Scaling of hybrid-electric vehicle powertrain components for Hardware-in-the-loop simulation, Mechatronics, vol.19, issue.7, pp.1078-90, 2009.
DOI : 10.1016/j.mechatronics.2009.08.001

G. Miragliotta, The power of dimensional analysis in production systems design, International Journal of Production Economics, vol.131, issue.1, pp.175-82, 2011.
DOI : 10.1016/j.ijpe.2010.08.009

G. Murphy, Similitude in engineering The Ronald press company, 1950.

E. Taylor, Dimensional Analysis for engineers [26] Parvex . NX series Motor Datasheet, 1974.

. Kollmorgen, B. Goldline, and . Series,

R. Myers, D. Montgomery, and C. Anderson-cook, Response surface methodology: process and product optimization using designed experiments, 2009.

R. Jin, W. Chen, and T. Simpson, Comparative studies of metamodeling techniques under multiple modeling criteria, 8th Symposium on Multidisciplinary Analysis and Optimization, pp.1-13, 2000.
DOI : 10.2307/1269548

T. Simpson, J. Poplinski, P. Koch, and A. J. , Metamodels for Computer-based Engineering Design: Survey and recommendations, Engineering with Computers, vol.17, issue.2, pp.129-50, 2001.
DOI : 10.1007/PL00007198

J. Kleijnen, Kriging metamodeling in simulation: A review, European Journal of Operational Research, vol.192, issue.3, pp.707-723, 2009.
DOI : 10.1016/j.ejor.2007.10.013

M. Stein, Interpolation of spatial data: some theory for kriging, 1999.
DOI : 10.1007/978-1-4612-1494-6

N. Bencheikh, R. Letty, F. Claeyssen, G. Magnac, and G. Migliorero, Limited angel torque actuator for fine angular positioning, Proceedings of the 12th International Conference on New Actuators, 2010.

C. Tsai, S. Lin, H. Huang, and Y. Cheng, Design and control of a brushless DC limited-angle torque motor with its application to fuel control of small-scale gas turbine engines, Mechatronics, vol.19, issue.1, pp.29-41, 2009.
DOI : 10.1016/j.mechatronics.2008.07.003

F. , Excellence in aerospace actuation and support chain management, pp.4-6, 2002.

T. Cebeci and P. Bradshaw, Physical and Computational Aspects of Convective Heat Transfer, 1984.

M. La¨?dla¨?d, Extraction de modèles thermiques simplifiés des machinesélectriquesà machines´machinesélectriquesmachinesélectriques`machinesélectriquesà partir dun calcul du champ de températures, pp.3-0598

F. Roos, H. Johansson, and J. Wikander, Optimal selection of motor and gearhead in mechatronic applications, Mechatronics, vol.16, issue.1, pp.63-72, 2006.
DOI : 10.1016/j.mechatronics.2005.08.001

M. Budinger, J. Liscouet, F. Hospital, and J. Mare, Estimation models for the preliminary design of electromechanical actuators, Proceedings of
DOI : 10.1016/S0967-0661(98)00047-1

URL : https://hal.archives-ouvertes.fr/hal-00712986