C. Farrar and K. Worden, An introduction to structural health monitoring, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.365, issue.1851, pp.303-315, 2007.
DOI : 10.1098/rsta.2006.1928

S. Doebling, C. Farrar, and M. Prime, A Summary Review of Vibration-Based Damage Identification Methods, The Shock and Vibration Digest, vol.30, issue.2, pp.91-105, 1998.
DOI : 10.1177/058310249803000201

C. Farrar and A. Lieven, Damage prognosis: the future of structural health monitoring, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.60, issue.1851, pp.623-632, 2007.
DOI : 10.1098/rsta.2006.1927

P. Schubel, J. Luo, and I. Daniel, Impact and post impact behavior of composite sandwich panels, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.1051-1057, 2007.
DOI : 10.1016/j.compositesa.2006.06.022

S. Abrate, Impact on composite structures, 1998.
DOI : 10.1017/CBO9780511574504

S. Petit, C. Bouvet, and A. Bergerot, Impact and compression after impact experimental study of a composite laminate with a cork thermal shield, Composites Science and Technology, vol.67, issue.15-16, pp.3286-3299, 2007.
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-00509042

P. Cawley and R. Adams, The location of defects in structures from measurements of natural frequencies, The Journal of Strain Analysis for Engineering Design, vol.1, issue.2, pp.49-57, 1979.
DOI : 10.1002/nme.1620030211

C. Farrar, S. Doebling, and D. Nix, Vibration-based structural damage identification, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.359, issue.1778, pp.131-149, 1778.
DOI : 10.1098/rsta.2000.0717

D. Montalvaõ, N. Maia, and A. Ribeiro, A Review of Vibration-based Structural Health Monitoring with Special Emphasis on Composite Materials, The Shock and Vibration Digest, vol.38, issue.4, pp.295-324, 2006.
DOI : 10.1177/0583102406065898

A. Shahdin, J. Morlier, and Y. Gourinat, Correlating Low-energy Impact Damage with Changes in Modal Parameters: A Preliminary Study on Composite Beams, Structural Health Monitoring: An International Journal, vol.4, issue.6, pp.523-536, 2009.
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-01851903

A. Shahdin, J. Morlier, and Y. Gourinat, Damage monitoring in sandwich beams by modal parameter shifts: A comparative study of burst random and sine dwell vibration testing, Journal of Sound and Vibration, vol.329, issue.5, pp.566-584, 2010.
DOI : 10.1016/j.jsv.2009.09.029
URL : https://hal.archives-ouvertes.fr/hal-01852282

D. Montalvao, A. Ribeiro, and J. Duarte-silva, A method for the localization of damage in a CFRP plate using damping, Mechanical Systems and Signal Processing, vol.23, issue.6, pp.1846-1854, 2008.
DOI : 10.1016/j.ymssp.2008.08.011

, Figure 16 Damage localization maps (RMSD indices) overlaid on Ultrasonic C-scan maps for plate nos 1?6. The DI results (red zone) are compared to NDT test (green zone)

, NDT: nondestructive testing; DI: damage indicator; RMSD: root mean square deviation

J. Frieden, J. Cugnoni, and J. Botsis, Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling, Composites Part B: Engineering, vol.42, issue.4, pp.607-613, 2011.
DOI : 10.1016/j.compositesb.2011.02.021

J. Morlier, F. Bos, and P. Castera, Diagnosis of a portal frame using advanced signal processing of laser vibrometer data, Journal of Sound and Vibration, vol.297, issue.1-2, pp.420-431, 2006.
DOI : 10.1016/j.jsv.2006.03.044

M. Rucka and K. Wilde, Application of continuous wavelet transform in vibration based damage detection method for beams and plates, Journal of Sound and Vibration, vol.297, issue.3-5, pp.3-5, 2006.
DOI : 10.1016/j.jsv.2006.04.015

B. Kim, H. Kim, and T. Park, Nondestructive damage evaluation of plates using the multi-resolution analysis of two-dimensional Haar wavelet, Journal of Sound and Vibration, vol.292, issue.1-2, pp.82-104, 2006.
DOI : 10.1016/j.jsv.2005.07.035

Y. Huang, D. Meyer, and S. Nemat-nesser, Damage detection with spatially distributed 2D Continuous Wavelet Transform, Mechanics of Materials, vol.41, issue.10, pp.1096-1107, 2009.
DOI : 10.1016/j.mechmat.2009.05.006

S. Loutridis, E. Douka, and L. Hadjileontiadis, A two-dimensional wavelet transform for detection of cracks in plates, Engineering Structures, vol.27, issue.9, pp.1327-1338, 2005.
DOI : 10.1016/j.engstruct.2005.03.006

W. Fan and P. Qiao, A 2-D continuous wavelet transform of mode shape data for damage detection of plate structures, International Journal of Solids and Structures, vol.46, issue.25-26, pp.25-26, 2009.
DOI : 10.1016/j.ijsolstr.2009.08.022

A. Katunin, Damage identification in composite plates using two-dimensional B-spline wavelets, Mechanical Systems and Signal Processing, vol.25, issue.8, pp.3153-3167, 2011.
DOI : 10.1016/j.ymssp.2011.05.015

J. Morlier and L. Mevel, Modeshapes Recognition Using Fourier Descriptors: A Simple SHM Example, Proceedings of the 30th international modal analysis conference, 2012.
DOI : 10.1177/1475921710373297
URL : https://hal.archives-ouvertes.fr/hal-00696018

L. Yu and V. Giurgiutiu, In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection, Ultrasonics, vol.48, issue.2, pp.117-134, 2008.
DOI : 10.1016/j.ultras.2007.10.008

W. Ostachowicz, P. Kudela, and P. Malinowski, Damage localisation in plate-like structures based on PZT sensors, Mechanical Systems and Signal Processing, vol.23, issue.6, pp.1805-1829, 2009.
DOI : 10.1016/j.ymssp.2008.10.011

P. Malinowski, T. Wandowski, and W. Ostachowicz, Damage detection potential of a triangular piezoelectric configuration, Mechanical Systems and Signal Processing, vol.25, issue.7, pp.2722-2732, 2011.
DOI : 10.1016/j.ymssp.2011.02.010

D. Adams, Health monitoring of structural materials and components, 2007.
DOI : 10.1002/9780470511589

W. Staszewski, C. Boller, and G. Tomlinson, Health monitoring of aerospace structures, 2003.
DOI : 10.1002/0470092866

K. Worden, C. Farrar, and G. Manson, The fundamental axioms of structural health monitoring, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.463, issue.2082, pp.1639-1664, 2007.
DOI : 10.1098/rspa.2007.1834

B. Moaveni, X. He, and J. Conte, Damage Identification of a Composite Beam Using Finite Element Model Updating, Computer-Aided Civil and Infrastructure Engineering, vol.278, issue.3, pp.339-359, 2008.
DOI : 10.1016/0022-460X(91)90595-B

M. Meo and G. Zumpano, Damage assessment on plate-like structures using a global-local optimization approach, Optimization and Engineering, vol.236, issue.1, pp.161-177, 2008.
DOI : 10.1007/978-94-017-1903-2_11

H. Niemann, J. Morlier, and A. Shahdin, Damage localization using experimental modal parameters and topology optimization, Mechanical Systems and Signal Processing, vol.24, issue.3, pp.636-652, 2010.
DOI : 10.1016/j.ymssp.2009.10.022
URL : https://hal.archives-ouvertes.fr/hal-01852236

A. Shahdin, J. Morlier, and H. Niemann, Correlating low energy impact damage with changes in modal parameters: diagnosis tools and FE validation, Structural Health Monitoring: An International Journal, vol.35, issue.7, pp.199-217, 2011.
DOI : 10.1016/j.jsv.2006.03.044
URL : https://hal.archives-ouvertes.fr/hal-01852658

J. Viana, P. Antunes, and R. Guimara, Combining experimental and computed data for effective SHM of critical structural components, 2011 Aerospace Conference, pp.5-12, 2011.
DOI : 10.1109/AERO.2011.5747570

G. Park, H. Sohn, and C. Farra, Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward, The Shock and Vibration Digest, vol.35, issue.6, pp.451-463, 2003.
DOI : 10.1177/05831024030356001

Y. Lim, S. Bhalla, and C. Soh, Structural identification and damage diagnosis using self-sensing piezo-impedance transducers, Smart Materials and Structures, vol.15, issue.4, pp.987-995, 2006.
DOI : 10.1088/0964-1726/15/4/012

W. Yan, J. Cai, and W. Chen, Monitoring interfacial defects in a composite beam using impedance signatures, Journal of Sound and Vibration, vol.326, issue.1-2, pp.340-352, 2009.
DOI : 10.1016/j.jsv.2009.04.030

S. Bhalla and C. Soh, Structural Health Monitoring by Piezo???Impedance Transducers. II: Applications, Journal of Aerospace Engineering, vol.17, issue.4, pp.166-175, 2004.
DOI : 10.1061/(ASCE)0893-1321(2004)17:4(166)

W. Yan and W. Chen, Structural health monitoring using high-frequency electromechanical signatures Adv Civil Eng, 2010.
DOI : 10.1155/2010/429148
URL : https://doi.org/10.1155/2010/429148

S. Bhalla, A. Gupta, and S. Bansal, Ultra Low-cost Adaptations of Electro-mechanical Impedance Technique for Structural Health Monitoring, Journal of Intelligent Material Systems and Structures, vol.20, issue.8, pp.991-999, 2009.
DOI : 10.1177/104538902761696733

V. Giurgiutiu and A. Zagrai, Damage Detection in Thin Plates and Aerospace Structures with the Electro-Mechanical Impedance Method, Structural Health Monitoring: An International Journal, vol.35, issue.6, pp.1025-1036, 2005.
DOI : 10.1115/1.1484117
URL : http://www.me.sc.edu/research/lamss/pdf/journals/48_shm-ij_v4-n2-june2005_99-118.pdf

C. Liang, F. Sun, and C. Rogers, Coupled Electro-Mechanical Analysis of Adaptive Material Systems ??? Determination of the Actuator Power Consumption and System Energy Transfer, Journal of Intelligent Material Systems and Structures, vol.25, issue.10, pp.12-20, 1994.
DOI : 10.2514/3.10984

C. Liang, F. Sun, and C. Rogers, An Impedance Method for Dynamic Analysis of Active Material Systems, Journal of Vibration and Acoustics, vol.116, issue.1, pp.120-128, 1994.
DOI : 10.1115/1.2930387

V. Giurgiutiu, Structural health monitoring with piezoelectric wafer active sensors, 2008.

S. Bhalla and C. Soh, Structural Health Monitoring by Piezo-Impedance Transducers. I: Modeling, Journal of Aerospace Engineering, vol.17, issue.4, pp.154-165, 2004.
DOI : 10.1061/(ASCE)0893-1321(2004)17:4(154)

J. Williams, J. Nayeb-hashemi, and S. Lee, Ultrasonic attenuation and velocity in AS/3501-6 graphite fiber composite, Journal of Nondestructive Evaluation, vol.14, issue.3, pp.137-148, 1980.
DOI : 10.1007/BF00566121

E. Flynn, M. Todd, and C. Dunn, Identifying scatter targets in 2D space using in situ phased-arrays for guided wave structural health monitoring, Proceedings of the 8th international workshop on structural health monitoring, pp.12-15, 2011.

S. Kessler, E. Flynn, and C. Dunn, A structural health monitoring software tool for optimization, diagnostics and prognostics, Proceedings of the 3rd annual conference of the prognostics and health management society, pp.25-29, 2011.

Z. Chao, Z. Su, and L. Cheng, Quantitative evaluation of orientation-specific damage using elastic waves and probability-based diagnostic imaging, Mech Syst Signal Pr, vol.25, issue.6, pp.2135-2156, 2011.

Z. Su and L. Ye, Identification of damage using Lamb waves: from fundamentals to applications, 2009.
DOI : 10.1007/978-1-84882-784-4