]. P. Schubel, J. Luo, I. Daniel, ]. J. Dear, H. Lee et al., Impact damage processes in composite sheet and sandwich honeycomb materials Impact and compression after impact experimental study of a composite laminate with a cork thermal shield Compressive strength after impact of CFRP-foam core sandwich panels in marine applications Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, [5] S. Abrate, Impact on composite structures, pp.1051-1057, 1988.

S. W. Doebling, C. R. Farrar, M. B. , Y. J. Yan, L. Cheng et al., A Summary Review of Vibration-Based Damage Identification Methods, Mechanical Systems and Signal Processing Nadler, A review of structural health monitoring literature, pp.91-105, 1996.
DOI : 10.1177/058310249803000201

E. P. Carden and P. Fanning, Vibration Based Condition Monitoring: A Review, Structural Health Monitoring: An International Journal, vol.128, issue.5, pp.355-377, 2004.
DOI : 10.1016/S0029-8018(01)00077-4

H. Van-der-auweraer, International research projects on structural damage detection, Damage Assessment of, Structures Key Engineering Materials, vol.204, issue.2, pp.97-112, 2001.

B. J. Schwarz and M. Richardson, Experimental modal analysis, CSI Reliability week Orlando FL, 1999.

G. Gloth and M. Sinapius, Influence and characterisation of weak non-linearities in swept-sine modal testing, Aerospace Science and Technology, vol.8, issue.2, pp.111-120, 2004.
DOI : 10.1016/j.ast.2003.09.005

M. L. Fugate, H. Sohn, and C. R. Farrar, VIBRATION-BASED DAMAGE DETECTION USING STATISTICAL PROCESS CONTROL, Mechanical Systems and Signal Processing, vol.15, issue.4, pp.707-721, 2001.
DOI : 10.1006/mssp.2000.1323

K. Waldron, A. Ghoshal, M. J. Schulz, M. J. Sundaresan, F. Ferguson et al.,

C. , Damage detection using finite elements and laser operational deflection shapes, Journal of Finite Elements in Analysis and Design, vol.38, pp.193-226, 2002.

M. J. Sundaresan, P. F. Pai, A. Ghoshal, M. J. Schulz, F. Ferguson et al., Methods of distributed sensing for health monitoring of composite material structures, Composites Part A: Applied Science and Manufacturing, vol.32, issue.9, pp.1357-1374, 2001.
DOI : 10.1016/S1359-835X(01)00090-2

J. R. Leclerc, K. Worden, W. J. Staszewski, and J. Haywood, Impact detection in an aircraft composite panel???A neural-network approach, Journal of Sound and Vibration, vol.299, issue.3, pp.672-682, 2007.
DOI : 10.1016/j.jsv.2006.07.019

H. T. Banks, D. J. Inman, D. J. Leo, and Y. Wang, AN EXPERIMENTALLY VALIDATED DAMAGE DETECTION THEORY IN SMART STRUCTURES, Journal of Sound and Vibration, vol.191, issue.5, pp.859-880, 1996.
DOI : 10.1006/jsvi.1996.0160

M. Krawczuk, W. Ostachowicz, and W. , Identification of Delamination in Composite Beams by Genetic Algorithm, Science and Engineering of Composite Materials, vol.34, issue.2, pp.147-155, 2002.
DOI : 10.4028/www.scientific.net/KEM.204-205.241

Y. J. Yan and L. H. Yam, Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis, Composite Structures, vol.58, issue.1, pp.29-38, 2002.
DOI : 10.1016/S0263-8223(02)00043-0

C. Y. Kao and S. L. Hung, Detection of structural damage via free vibration responses generated by approximating artificial neural networks, Computers & Structures, vol.81, issue.28-29, pp.28-29
DOI : 10.1016/S0045-7949(03)00323-7

J. L. Wojtowicki and L. Jaouen, New approach for the measurement of damping properties of materials using the Oberst beam, Review of Scientific Instruments, vol.2, issue.8, pp.2569-2574, 2004.
DOI : 10.1006/jsvi.1999.2495

K. Vanhoenacker, J. Schoukens, P. Guillaume, and S. Vanlanduit, The use of multisine excitations to characterise damage in structures, Mechanical Systems and Signal Processing, vol.18, issue.1, pp.43-57, 2004.
DOI : 10.1016/S0888-3270(03)00044-X

R. M. Gadelrab, THE EFFECT OF DELAMINATION ON THE NATURAL FREQUENCIES OF A LAMINATED COMPOSITE BEAM, Journal of Sound and Vibration, vol.197, issue.3, pp.283-292, 1996.
DOI : 10.1006/jsvi.1996.0532

J. J. Tracy and G. C. Pardoen, Effect of delamination on the natural frequencies of composite laminates, Journal of Composite Materials, vol.23, issue.12, pp.1200-1215, 1989.

A. Shahdin, J. Morlier, and Y. Gourinat, Correlating Low-energy Impact Damage with Changes in Modal Parameters: A Preliminary Study on Composite Beams, in Structural Health Monitoring, 2009.
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-01851903

O. S. Salawu, Detection of structural damage through changes in frequency: a review, Engineering Structures, vol.19, issue.9, pp.718-741, 1996.
DOI : 10.1016/S0141-0296(96)00149-6

H. Y. Kim and W. Hwang, Effect of debonding on natural frequencies and frequency response functions of honeycomb sandwich beams, Composite Structures, vol.55, issue.1, pp.51-62, 2002.
DOI : 10.1016/S0263-8223(01)00136-2

W. Lestari and P. Qiao, Damage detection of fiber-reinforced polymer honeycomb sandwich beams, Composite Structures, vol.67, issue.3, pp.365-373, 2005.
DOI : 10.1016/j.compstruct.2004.01.023

R. D. Adams and P. Cawley, The localisation of defects in structures from measurements of natural frequencies, Journal of Strain Analysis, vol.14, pp.49-57, 1979.

L. H. Yam and L. Cheng, Damage detection of composite structures using dynamic analysis, Key Engineering Materials, pp.295-296, 2005.

, Non-linear vibration of a delaminated composite beam, J.Z. Arkaduiz. Key Engineering Materials, vol.293, pp.294-607, 2005.

J. T. Kim, Y. S. Ryu, H. M. Cho, and N. Stubbs, Damage identification in beam-type structures: frequency-based method vs mode-shape-based method, Engineering Structures, vol.25, issue.1, pp.57-67, 2003.
DOI : 10.1016/S0141-0296(02)00118-9

L. M. Khoo, P. R. Mantena, and P. Jadhav, Structural Damage Assessment Using Vibration Modal Analysis, Structural Health Monitoring: An International Journal, vol.3, issue.2, pp.177-194, 2004.
DOI : 10.1115/1.1303121

S. G. Mattson and S. M. Pandit, Damage detection and localization based on outlying residuals, Smart Materials and Structures, vol.15, issue.6, pp.1801-1810, 2006.
DOI : 10.1088/0964-1726/15/6/035

D. Montalvao, A. M. Ribeiro, and J. Duarte-silva, A method for the localization of damage in a CFRP plate using damping, Mechanical Systems and signal, Processing, 2008.

R. D. Adams, Damping in Composites, Materials Science Forum, vol.119, issue.121, pp.121-124, 1993.
DOI : 10.4028/www.scientific.net/MSF.119-121.3

Z. Zhang and G. Hartwig, Relation of damping and fatigue damage of unidirectional fibre composites, International Journal of Fatigue, vol.24, issue.7, pp.713-738, 2004.
DOI : 10.1016/S0142-1123(01)00206-7

R. F. Gibson, Modal vibration response measurements for characterization of composite materials and structures, Composites Science and Technology, pp.2769-2780, 2000.
DOI : 10.1016/s0266-3538(00)00092-0

D. A. Saravanos and D. A. Hopkins, EFFECTS OF DELAMINATIONS ON THE DAMPED DYNAMIC CHARACTERISTICS OF COMPOSITE LAMINATES: ANALYSIS AND EXPERIMENTS, Journal of Sound and Vibration, vol.192, issue.5, pp.977-993, 1995.
DOI : 10.1006/jsvi.1996.0229

M. Colakoglu, Description of fatigue damage using a damping monitoring technique, Turkish Journal of Engineering and Environmental Sciences, vol.27, pp.125-130, 2003.

M. H. Richardson and M. A. Mannan, Correlating minute structural faults with changes in modal parameters, Proceedings of SPIE International Society for Optical Engineering, vol.1923, issue.2, pp.893-898, 1993.

M. Hexply and D. Sheet,

T. Hexweb, Honeycomb attributes and properties, Hexcel Composites, F.R

R. H. Meyers and D. C. Montgomery, Response surface methodology, 1995.

J. Morlier, B. Chermain, and Y. Gourinat, Original Statistical Approach for the Reliability in Modal Parameters, Proceedings of the International Modal Analysis Conference, 2009.

B. Peeters, H. V. Auweraer, P. Guillaume, and J. Leuridan, The PolyMAX Frequency-Domain Method: A New Standard for Modal Parameter Estimation?, Shock and Vibration, vol.11, issue.3-4, pp.395-409, 2004.
DOI : 10.1155/2004/523692