A. P. Mouritz, K. H. Leong, and I. Herszberg, A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites, Composites Part A: Applied Science and Manufacturing, vol.28, issue.12, pp.979-991, 1997.
DOI : 10.1016/S1359-835X(97)00057-2

D. D. Cartie and I. K. Partidge, Delamination behaviour of Z-pinned laminates, p.12, 1999.
DOI : 10.1016/S1566-1369(00)80005-9

M. Grassi, X. Zhang, and M. Meo, Prediction of stiffness and stresses in z-fibre reinforced composite laminates, Composites Part A: Applied Science and Manufacturing, vol.33, issue.12, pp.1653-1664, 2002.
DOI : 10.1016/S1359-835X(02)00137-9

A. P. Mouritz and B. N. Cox, A mechanistic approach to the properties of stitched laminates, Composites Part A: Applied Science and Manufacturing, vol.31, issue.1
DOI : 10.1016/S1359-835X(99)00056-1

, Compos. Part A, vol.31, pp.1-27, 2000.

D. Liu, Delamination Resistance in Stitched and Unstitched Composite Plates Subjected to Impact Loading, Journal of Reinforced Plastics and Composites, vol.9, issue.1, pp.59-69, 1990.
DOI : 10.1520/STP36315S

S. K. Sharma and B. V. Sankar, Effect of through-the-thickness stitching on impact and interlaminar fracture properties of textile graphite-epoxy laminates, 1995.

L. K. Jain and Y. Mai, On the effect of stitching on mode I delamination toughness of laminated composites, Composites Science and Technology, vol.51, issue.3, pp.331-345, 1994.
DOI : 10.1016/0266-3538(94)90103-1

L. S. Chen, B. V. Sankar, and P. G. Ifju, A new mode I fracture test for composites with translaminar reinforcements, Composites Science and Technology, vol.62, issue.10-11, pp.10-11, 2002.
DOI : 10.1016/S0266-3538(02)00096-9

V. A. Guenon, T. W. Chou, and J. W. Gillespie, Toughness properties of a three-dimensional carbon-epoxy composite, Journal of Materials Science, vol.2, issue.2, pp.4168-4175, 1989.
DOI : 10.1007/BF01168991

L. K. Jain, K. A. Dransfield, and Y. Mai, Effect of Reinforcing Tabs on the Mode I Delamination Toughness of Stitched CFRPs, Journal of Composite Materials, vol.2, issue.22, pp.2016-2042, 1998.
DOI : 10.1016/0022-5096(86)90039-6

X. Sun, L. Tong, M. D. Wood, and Y. Mai, Effect of stitch distribution on mode I delamination toughness of laminated DCB specimens, Composites Science and Technology, vol.64, issue.7-8, pp.7-8, 2004.
DOI : 10.1016/j.compscitech.2003.07.004

M. D. Wood, X. Sun, L. Tong, A. Katzos, and A. R. Rispler, The effect of stitch distribution on Mode I delamination toughness of stitched laminated composites ??? experimental results and FEA simulation, Composites Science and Technology, vol.67, issue.6, pp.1058-1072, 2007.
DOI : 10.1016/j.compscitech.2006.06.002

L. K. Jain, K. A. Dransfield, and Y. W. Mai, On the effects of stitching in CFRPs???II. Mode II delamination toughness, Composites Science and Technology, vol.58, issue.6, pp.829-837, 1998.
DOI : 10.1016/S0266-3538(97)00186-3

B. V. Sankar and S. K. Sharma, Mode II delamination toughness of stitched graphite/epoxy textile composites, Composites Science and Technology, vol.57, issue.7, pp.729-737, 1997.
DOI : 10.1016/S0266-3538(97)00032-8

M. L. Benzeggagh, X. J. Gong, P. Davies, J. M. Roedlandt, Y. Mourin et al., A mixed mode specimen for interlaminar fracture testing, Composites Science and Technology, vol.34, issue.2, pp.129-143, 1989.
DOI : 10.1016/0266-3538(89)90101-2

K. L. Rugg, B. N. Cox, R. Massabo-', P. Davies, B. R. Blackman et al., Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibers, Composites Part A: Applied Science and Manufacturing, vol.33, issue.2, pp.177-190, 1998.
DOI : 10.1016/S1359-835X(01)00109-9

J. R. Reeder and J. H. Crews, Non-linear analysis and redesign of the mixed-mode bending delamination test, NASA TM, p.102777, 1991.

J. R. Reeder and J. H. Crews, A mixed-mode bending apparatus for delamination testing

, NASA TM 100662 Report, 1988.

A. D5528-01, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced, Polymer Matrix Composites, 2001.

A. , Standard Test Method for Mixed Mode I-Mode II

, Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, 2003.

G. R. Irwin, Analysis of stresses and strains near the end of crack traversing a plate, J

, Appl. Mech. Transactions, pp.361-364, 1957.

A. J. Kinloch, Y. Wang, J. G. Williams, and P. Yayla, The mixed-mode delamination of fibre composite materials, Composites Science and Technology, vol.47, issue.3, pp.225-262, 1993.
DOI : 10.1016/0266-3538(93)90031-B

M. L. Benzeggagh and M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, issue.4
DOI : 10.1016/0266-3538(96)00005-X

, Compos. Sci. Technol, vol.56, issue.4, pp.439-449, 1996.

M. D. Wood, X. Sun, L. Tong, Q. Luo, A. Katzos et al., A New ENF Test Specimen for the Mode II Delamination Toughness Testing of Stitched Woven CFRP Laminates, Journal of Composite Materials, vol.64, issue.11
DOI : 10.1177/073168449801700605

, Compos. Mat, vol.41, issue.14, pp.1743-1772, 2007.

J. D. Whitcomb, Analysis of instability-related growth of a through-width delamination

, NASA TM, vol.86301, 1984.

E. M. Wu and R. C. Reuter, Crack extension in fiberglass-reinforced plastics, TAM Report No, vol.275, 1965.
DOI : 10.21236/AD0613576