C. Farrar and K. Worden, An introduction to structural health monitoring, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.365, issue.1851, pp.303-318, 2007.
DOI : 10.1098/rsta.2006.1928

S. Doebling, C. Farrar, and M. Prime, A Summary Review of Vibration-Based Damage Identification Methods, The Shock and Vibration Digest, vol.30, issue.2, pp.91-105, 1998.
DOI : 10.1177/058310249803000201

C. Farrar and A. Lieven, Damage prognosis: the future of structural health monitoring, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.60, issue.1851, pp.623-655, 2007.
DOI : 10.1098/rsta.2006.1927

P. Schubel, J. Luo, and I. Daniel, Impact and post impact behavior of composite sandwich panels, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.1051-1058, 2007.
DOI : 10.1016/j.compositesa.2006.06.022

S. Abrate, Impact on composite structures, 1988.
DOI : 10.1017/CBO9780511574504

S. Petit, C. Bouvet, A. Bergerot, and J. Barrau, Impact and compression after impact experimental study of a composite laminate with a cork thermal shield, Composites Science and Technology, vol.67, issue.15-16, pp.3286-99, 2007.
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-00509042

P. Cawley and R. Adams, The location of defects in structures from measurements of natural frequencies, The Journal of Strain Analysis for Engineering Design, vol.1, issue.2, pp.49-57, 1979.
DOI : 10.1002/nme.1620030211

C. Farrar, S. Doebling, and D. Nix, Vibration-based structural damage identification, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.359, issue.1778, pp.131-180, 1778.
DOI : 10.1098/rsta.2000.0717

D. Montalvão, N. Maia, and A. Ribeiro, A Review of Vibration-based Structural Health Monitoring with Special Emphasis on Composite Materials, The Shock and Vibration Digest, vol.38, issue.4, 2006.
DOI : 10.1177/0583102406065898

A. Shahdin, J. Morlier, and Y. Gourinat, Correlating Low-energy Impact Damage with Changes in Modal Parameters: A Preliminary Study on Composite Beams, Structural Health Monitoring: An International Journal, vol.4, issue.6, pp.523-559, 2009.
DOI : 10.1016/j.compscitech.2007.03.032

A. Shahdin, J. Morlier, and Y. Gourinat, Damage monitoring in sandwich beams by modal parameter shifts: A comparative study of burst random and sine dwell vibration testing, Journal of Sound and Vibration, vol.329, issue.5, pp.566-84, 2010.
DOI : 10.1016/j.jsv.2009.09.029

J. Frieden, J. Cugnoni, J. Botsis, and T. Gmür, Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling, Composites Part B: Engineering, vol.42, issue.4, pp.607-620, 2011.
DOI : 10.1016/j.compositesb.2011.02.021

D. Adams, Health monitoring of structural materials and components, 2007.
DOI : 10.1002/9780470511589

W. Staszewski, C. Boller, and G. Tomlinson, Health Monitoring of Aerospace Structures, 2003.

D. Balageas, C. Fritzen, and A. Güemes, Structural health monitoring, ISTE, 2006.
DOI : 10.1002/9780470612071

Y. Yan, L. Cheng, Z. Wu, and L. Yam, Development in vibration-based structural damage detection technique, Mechanical Systems and Signal Processing, vol.21, issue.5, pp.2198-211, 2007.
DOI : 10.1016/j.ymssp.2006.10.002

D. Montalvao, A. Ribeiro, and J. Duarte-silva, A method for the localization of damage in a CFRP plate using damping, Mechanical Systems and Signal Processing, vol.23, issue.6, 2008.
DOI : 10.1016/j.ymssp.2008.08.011

B. Moaveni, X. He, and J. Conte, Damage Identification of a Composite Beam Using Finite Element Model Updating, Computer-Aided Civil and Infrastructure Engineering, vol.278, issue.3, pp.339-59, 2008.
DOI : 10.1016/0022-460X(91)90595-B

M. Meo and G. Zumpano, Damage assessment on plate-like structures using a global-local optimization approach, Optimization and Engineering, vol.236, issue.1, pp.161-77, 2008.
DOI : 10.1007/978-94-017-1903-2_11

H. Niemann, J. Morlier, A. Shahdin, and Y. Gourinat, Damage localization using experimental modal parameters and topology optimization, Mechanical Systems and Signal Processing, vol.24, issue.3, pp.636-52, 2010.
DOI : 10.1016/j.ymssp.2009.10.022
URL : https://hal.archives-ouvertes.fr/hal-01852236

A. Shahdin, J. Morlier, H. Niemann, and Y. Gourinat, Correlating low energy impact damage with changes in modal parameters: diagnosis tools and FE validation, Structural Health Monitoring: An International Journal, vol.35, issue.7, pp.199-217, 2011.
DOI : 10.1016/j.jsv.2006.03.044
URL : https://hal.archives-ouvertes.fr/hal-01852658

J. Viana, P. Antunes, R. Guimara, N. Ferreira, M. Baptista et al., Combining experimental and computed data for effective SHM of critical structural components, 2011 Aerospace Conference, pp.5-12, 2011.
DOI : 10.1109/AERO.2011.5747570

G. Park, H. Sohn, C. Farra, and D. Inman, Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward, The Shock and Vibration Digest, vol.35, issue.6, pp.451-63, 2003.
DOI : 10.1177/05831024030356001

Y. Lim, S. Bhalla, and C. Soh, Structural identification and damage diagnosis using self-sensing piezo-impedance transducers, Smart Materials and Structures, vol.15, issue.4, pp.987-95, 2006.
DOI : 10.1088/0964-1726/15/4/012

W. Yan, J. Cai, and W. Chen, Monitoring interfacial defects in a composite beam using impedance signatures, Journal of Sound and Vibration, vol.326, issue.1-2, pp.340-52, 2009.
DOI : 10.1016/j.jsv.2009.04.030

S. Bhalla and C. Soh, Structural Health Monitoring by Piezo???Impedance Transducers. II: Applications, Journal of Aerospace Engineering, vol.17, issue.4, pp.166-75, 2004.
DOI : 10.1061/(ASCE)0893-1321(2004)17:4(166)

W. Yan and W. Chen, Structural Health Monitoring Using High-Frequency Electromechanical Impedance Signatures, Advances in Civil Engineering, vol.93, issue.5, pp.1-11
DOI : 10.1177/1045389X06063087
URL : https://doi.org/10.1155/2010/429148

S. Bhalla, A. Gupta, and S. Bansal, Ultra Low-cost Adaptations of Electro-mechanical Impedance Technique for Structural Health Monitoring, Journal of Intelligent Material Systems and Structures, vol.20, issue.8, pp.991-1000, 2009.
DOI : 10.1177/104538902761696733

M. Gresil, L. Yu, V. Giurgiutiu, and M. Sutton, Predictive modeling of electromechanical impedance spectroscopy for composite materials, Structural Health Monitoring: An International Journal, vol.3, issue.6, 2012.
DOI : 10.1177/104538901320560355

K. Umesh and R. Ganguli, Shape and vibration control of a smart composite plate with matrix cracks, Smart Materials and Structures, vol.18, issue.2, 2009.
DOI : 10.1088/0964-1726/18/2/025002

V. Giurgiutiu and A. Zagrai, Damage Detection in Thin Plates and Aerospace Structures with the Electro-Mechanical Impedance Method, Structural Health Monitoring: An International Journal, vol.35, issue.6, pp.1025-1061, 2005.
DOI : 10.1115/1.1484117
URL : http://www.me.sc.edu/research/lamss/pdf/journals/48_shm-ij_v4-n2-june2005_99-118.pdf

V. Giurgiutiu and C. Kropas-hughes, Comparative study of neural network damage detection from a statistical set of electro-mechanical impedance spectra, Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II, pp.2-6, 2002.
DOI : 10.1117/12.484050

J. Min, S. Park, and C. Yun, Impedance-based structural health monitoring using neural networks for autonomous frequency range selection, Smart Mater Struct, vol.19, p.12, 2010.
DOI : 10.1088/0964-1726/19/12/125011

P. Pawar, K. Reddy, and R. Ganguli, Damage Detection in Beams using Spatial Fourier Analysis and Neural Networks, Journal of Intelligent Material Systems and Structures, vol.32, issue.6, pp.347-59, 2007.
DOI : 10.1016/j.jsv.2003.10.058

, Abaqus user's manual, Dassault System Simulia Corp, 2008.

, Matlab r2010a user's guide, the Mathworks inc, 2010.

M. Friswell and J. Mottershead, Finite element model updating in structural dynamics, 1995.
DOI : 10.1007/978-94-015-8508-8

S. Bhalla and C. Soh, Structural Health Monitoring by Piezo-Impedance Transducers. I: Modeling, Journal of Aerospace Engineering, vol.17, issue.4, pp.154-65, 2004.
DOI : 10.1061/(ASCE)0893-1321(2004)17:4(154)

S. Bhalla and C. Soh, Electro-mechanical impedance technique for structural health monitoring and non-destructive evaluation In: National workshop on structural health monitoring, non-destructive evaluation and retrofitting of structures. Indian Institute of Technology Delhi, 2008.

V. Giurgiutiu, Structural health monitoring with piezoelectric wafer active sensors, 2008.

Y. Yang, Y. Lim, and C. Soh, Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: II. Numerical verification, Smart Materials and Structures, vol.17, issue.3, 2008.
DOI : 10.1088/0964-1726/17/3/035009