 |
Journal articles
Identification and validation of a continuum damage model applied for the lifetime prediction of H11 tool steel
Abstract : This paper describes the work performed to identify and validate a non-isothermal continuum damage model for a widely used hot-work tool steel H11 at a hardness of 47 HRc. The investigation is based on an extensive high-temperature low-cycle fatigue database performed under strain rate controlled tests with and without dwell times in the range of 300°C-600°C. The approach gives a good description of the thermomechanical behaviour of H11 tool steel under various test conditions and constitutes a very good prediction tool for a very large amount of fatigue tests. This work is divided into three stages. First, isothermal fatigue tests are performed on flat specimens in order to identify lifetime model parameters. Then, thermo mechanical fatigue tests are considered in order to validate the model in a non-isothermal case. Lastly, low-cycle fatigue tests are carried out on notched specimens in order to investigate the model capabilities in a multiaxial condition.
Cited literature [10 references]
https://hal.archives-ouvertes.fr/hal-01851422
Contributor : Imt Mines Albi Ecole Nationale Supérieure Des Mines d'Albi-Carmaux <>
Submitted on : Wednesday, November 6, 2019 - 2:29:01 PM
Last modification on : Wednesday, June 24, 2020 - 4:18:43 PM
Document(s) archivé(s) le : Saturday, February 8, 2020 - 5:39:19 AM
Contributor : Imt Mines Albi Ecole Nationale Supérieure Des Mines d'Albi-Carmaux <>
Submitted on : Wednesday, November 6, 2019 - 2:29:01 PM
Last modification on : Wednesday, June 24, 2020 - 4:18:43 PM
Document(s) archivé(s) le : Saturday, February 8, 2020 - 5:39:19 AM
File
Identification_and_validation_...
Files produced by the author(s)
